Rapid Racking Rapid span User manual

Rapid span
Assembly instruction
AIS015

RAPID SPAN Multiple packages
IMPORTANT - ASSEMBLY INSTRUCTIONS
AIS015
1Join the upright Frames Ausing front and rear
beams Cat the desired heights.
2Insert the beam safety pin F.
3Add chipboard supports Eif the Heavy Duty
levels have been ordered.
For quantities per level see over.
4Fit shelves Dbetween front and rear beams C.
5Secure the unit to the floor with fixings B, if
required.
NB: This shelving system is not designed to
be loaded by mechanical means, e.g. fork lift
truck. Always load and unload by hand.
ASSEMBLY
A
A
We advise the use of protective
gloves and goggles, or eyeglasses
when assembling this product.
Tools required: Rubber mallet, electric drill and metric spanners
C
D
E
B
F
C
E
D
B
If you have any problems with this product or its assembly, please contact your local distributor or
call our helpline on 01285 686868 where a team of experts will be pleased to help.

Upright frames
2 off
COMPONENTS
RAPID SPAN Multiple packages
IMPORTANT - ASSEMBLY INSTRUCTIONS
AIS015
A
Keep heavier items
on the bottom shelves
Do not climb
on your shelving
Make sure it is on a
level and even floor
Keep your
shelving dry
SAFETY
CFront and rear beams
1150 mm, 1500 mm, 1850 mm,
2250 mm or 2700 mm
DChipboard shelves
FBeam safety pins
2 per beam - 4 per level
1 off per shelf level, width
and depth to suit
BFloor fixing
2 off per frame
EChipboard supports
2000mm, 2500mm or 3000mm H
600mm or 900mm D
1150 mm beam - 2 per level
1500 mm beam - 3 per level
1850 mm beam - 4 per level
2250 mm beam - 5 per level
2700 mm beam - 6 per level
If you have any problems with this product or its assembly, please contact your local distributor or
call our helpline on 01285 686868 where a team of experts will be pleased to help.