Rapid Racking Rapid2 Medium duty tyre rack User manual

Rapid2
Medium duty tyre rack
Assembly instruction
AIST011

If you have any problems whatsoever please call 01 285 686868 where a team of experts will be pleased to help.
RAPID 2 MEDIUM DUTY TYRE RACK Multiple packages
IMPORTANT- ASSEMBLY INSTRUCTIONS
AIST011
1Fit feet D to uprights A.
2Assemble both ends first -Aand B. Starting
from the top insert beamBin the top two holes
of the uprights, tap in place with a rubber
mallet. Insert the second beam leaving 9 clear
holes. Insert the third beam leaving 16 clear
holes. Insert the bottom beam leaving 1 clear
hole for the plastic feet.
3Tap together using rubber mallet.
4Fit front and rear beamsCto uprights A, level
with side beams B. There is no front or rear
beam attached to the top of this bay next to
the top side beam B.
5Add caps E.
ASSEMBLY
We advise the use of protective
gloves and goggles, or eyeglasses
when assembling this product.
Tools required: Rubber mallet
Tyre Rack in use
A
A
B
B
C
C
D
E
The beam slots are tapered
and fit into the slots
as shown
C
M
Y
CM
MY
CY
CMY
K
AIST011 Medium Duty Tyre Rack.pdf 19/10/07 10:57:03

If you have any problems whatsoever please call 01285 686868 where a team of experts will be pleased to help.
Uprights
COMPONENTS
RAPID 2 MEDIUM DUTY TYRE RACK Multiple packages
IMPORTANT - ASSEMBLY INSTRUCTIONS
AIST011
A
Keep heavier items
on the bottom shelves
Do not climb
on your shelving
Make sure it is on a
level and even floor
Keep your
shelving dry
Tie plates recommended
with more than one bay
x4 per joint
BSide beams
380mm
8 of
SAFETY
1980 mm
4 of per bay
DFeet
4 of
CFront and rear beams
915 mm, 1220mm and 1525mm
6 of
ECaps
4 of