Rapid Racking Rapid1 Heavy duty tyre rack User manual

Rapid1
Heavy duty tyre rack
Assembly instruction
AIST014

HEAVY DUTY TYRE RACK Multiple packages
IMPORTANT - ASSEMBLY INSTRUCTIONS
AIST014
1Fit feet E to uprights A.
2Assemble both ends first - Aand B. Starting from the top
insert beam Bin the top two holes of the uprights, tap in
place with a rubber mallet. Insert the second beam
allowing 9 clear holes and 17 clear holes to the third
beam. Insert the fourth beam in the bottom two holes.
Tap together using rubber mallet.
3Fit front and rear beams Cto uprights A, level with side
beams B. There is no front or rear beam attached to the
top of this bay next to the top side beam B.
4Add support beams D.
5Add caps F.
ASSEMBLY
We advise the use of protective
gloves and goggles, or eyeglasses
when assembling this product.
Tools required: Rubber mallet
A
A
B
B
C
C
D
DE
F
Illustration shows Rapid 1 Back
to Back Tyre Rack