Rapid Racking Rapid silver workbench User manual

Rapid silver workbench
Assembly instruction
AIW009

RAPID SILVER WORKBENCH TCWB01C/03C
IMPORTANT - ASSEMBLY INSTRUCTIONS
AIW009
1Lay the workbench top Hon the floor or trestles.
Take one rear upright Aand locate in any corner
loosely fixing in place with 8 bolts, nuts and
washers F. Similarly fix the second rear upright.
2Fix the front uprights ensuring the slot for the
side supports Dis facing the rear.
3Fix the back and side supports Dand Eusing
the remaining dome head bolt, screwing into the
threaded holes on the support.
4Tighten all bolts and nuts.
5Optional adjusting feet Gcan be fitted now.
6Turn unit over and place in correct situation.
7The protective work surface Imay be left loose
on the top but can also be fixed with impact
adhesive.
ASSEMBLY
Tools required:
Allen key and spanners
If you have any problems whatsoever please call 01285 686868 where a team of experts will be pleased to help.
AB
D
D
E
G
I
H
F
Illustration shows optional
adjustable feet
G
C
Illustration shows underside of
workbench
Illustration shows underside
detail of the worktop being
fixed to the rear upright

If you have any problems whatsoever please call 01285 686868 where a team of experts will be pleased to help.
Rear upright
COMPONENTS
RAPID SILVER WORKBENCH TCWB01C/03C
IMPORTANT - ASSEMBLY INSTRUCTIONS
AIW009
A
915 mm
2 of
DSide supports
700mm
2 of
Front right hand upright
B
915 mm
1 of
Front left hand upright
C
915 mm
1 of
EBack supports
1500mm long for 01C
850mm long for 03C
1 of
FDome head allen bolt - 44 of
Nuts and washers - 32 of
GOptional
adjusting feet
4 of
HWorkbench top
1515 mm x 700mm 01C
850mm x 700 mm 03C
1 of
IBlack protective worksurface
1515 mm x 700mm 01C
850mm x 700 mm 03C
1 of