Rapid Racking Packing station trolley User manual

Packing station trolley
Assembly instruction
AIW017

1Fit castors Gand Hto uprights Ausing screws J.
2Assemble both ends first - Aand Bstarting
with the bottom holes, fit the first side beams B.
Fit the top side beams to the top holes of the
uprights.
3Tap together using rubber mallet.
4Fit front and rear beams Cto uprights Alevel
with side beams B.
5Place shelf Dinto the bottom of the trolley.
6Fit reel bar cups E to the top of side beams B.
7Insert reel bar Finto the reel bar cups.
8Finish by placing top caps Ionto uprights A.
ASSEMBLY
PACKING STATION TROLLEY NMPSRT2
IMPORTANT - ASSEMBLY INSTRUCTIONS
AIW017
Tools required:
Rubber mallet
AA
B
B
C
C
D
E
F
G
H
I
J
Castor must
fix through
hole nearest
the upright.
We advise the use of
protective gloves and
goggles, or eyeglasses
when assembling this
product.

Uprights
COMPONENTS
PACKING STATION TROLLEY NMPSRT2
IMPORTANT - ASSEMBLY INSTRUCTIONS
AIW017
A
Keep heavier items
on the bottom shelves
Do not climb
on your shelving
Make sure it is on a
level and even floor
Keep your
shelving dry
SAFETY
640 mm H
4 of
BSide beams
455 mm D
4 of
CFront and rear beams
920 mm W
4 of
DShelf
1 of
EReel bar cups
2 of
FReel bar
1 of
GWheel
3 of
HFixed wheel
1 of
ITop caps
4 of
JScrews
8 of