Razor W13111701003 User manual

Need Help? Visit our website at www.razor.com or call toll-free at 866-467-2967 Monday - Friday 8:00am - 5:00pm Pacific Time.
1
WARNING
Step 1 Step 2
Required Tools: (Not included)
A. Phillips screwdriver
CAUTION: To avoid potential shock or other injury, turn power switch OFF and disconnect
charger before conducting any assembly or maintenance procedures. Failure to follow these
steps in the correct order may cause irreparable damage.
Using a Phillips screwdriver, remove ten (10) screws from
the bottom of the unit.
Flip the unit over and lift the deck being careful not to pull
the wires from the sensor pad. Set the deck cover aside.
ELECTRIC PARTY POP/ELECTRIC TEKNO
BATTERY INSTALLATION
REPLACEMENT PROCEDURES
PART # W13111701003

Need Help? Visit our website at www.razor.com or call toll-free at 866-467-2967 Monday - Friday 8:00am - 5:00pm Pacific Time.
2
Step 3
Step 5
Step 4
Locate and disconnect the Battery from the controller.
Reverse the steps.
ATTENTION: Charge battery 4 hours before using.
Using a Phillips screwdriver, remove three (3) screws from
the battery holder and carefully remove the battery.