Reison 10-302 User manual

1
Accessory clamp 10-302 including versions
Version
Description
Pole type
10-302
Clamp (EU 25x10 mm rail) with V-stud
Ø 16-20 mm
10-302-P
Clamp (EU 25x10 mm rail) with plane stud
Ø 16-20 mm
Warning! This symbol indicates important information related to safety. Follow these
instructions carefully.
Read User Manual before use! It is important to fully understand the content of the user
manual before attempting to use the equipment.
2021-09-02
Dokument nummer: M10-302EN rev.01
Accessory clamp 10-302
ENGLISH

2
Intended use
Clamp intended to attach and position accessories, with a pole size Ø 16-20 mm, to the accessory rail
on operating and examination tables. The product is to be used by medical professionals within a
medical facility.
Säkerhetsföreskrifter
Maxbelastning: 50 kg across the table and 75 kg along the table according to EN 60601-1 and
EN 60601-2.
Utför en funktionskontroll före varje användningstillfälle!
When loosening the locking handle to adjust the height, support the accessory, to prevent it from
uncontrolled descend into the bottom position.
Service and preventive maintenance shall be performed by authorized personnel.
MAX 75 kg
MAX 50 kg

3
User instruction
Installation
Usage
A.
B.
A.
B.

4
Maintenance
Service, preventive maintenance, adjustment and repair shall be performed by authorized personnel
only. Altering the construction without a written consent from the manufacturer, is strictly forbidden.
Cleaning
Clean with antiseptic detergent with pH 6 –8 and warm water. Ethanol can be used. Wipe dry with
soft cloth. Do not use strong acidic or alkaline detergent.
Control
Check that there are no loose parts and that there is no damage to any part. Check the clamp lock
function and the function for positioning and locking the accessory pole in the clamp.
Annual service
Once a year the clamp shall be carefully cleaned, moving parts shall be lubricated, the locking
function shall be tested

5
Spare parts
Version:
10-302
10-302-P
Description
Pcs.
Article no.
Article no.
1.
Clamp body
1
12143
12143
2.
Washer PB 5x10x5
1
-
-
3.
Lock handle
1
10062
10062
4.
Stud
1
12145
12146
5.
Set screw MT6SS M5x6 A2
2
-
-
6.
Screw MKFXS M4x8 A2
1
-
-
7.
Lock handle
1
10346
10346
Technical specification
Maximum workload
50 kg across the table and 75 kg along the table according to EN 60601-1 and
EN 60601-2
Weight
0,8 kg
Material clamp
Stainless steel
Dimension (H x W x L)
115 x 55 x 55 mm
UDI-DI
10-302:
10-302-P:
07350111830038
07350111830045

6
Reison Medical AB
Eriksbergsvägen 32A
734 92 Hallstahammar
SWEDEN
[phone] [e-mail] [e-mail]