Reliable F3-80 Series User manual

(Note: Not all versions of sprinkler shown,
please see pages 2-10)
Sprinkler Model
K-Factor
gpm/psi1/2
(lpm/bar1/2)
Approvals*
Max. Working
Pressure
psi (bar)
Sprinkler
Identication
Number (SIN)
F3-80 Dry Pendent 8.0 (115) cULus 175 (12.0) RA6012
F3-80 Dry Horizontal Sidewall 8.0 (115) cULus 175 (12.0) RA6032
Table A
Model F3-80 Dry Sprinkler Summary
*Note: Approvals may not apply to all trim, inlet thread, temperature, and/or nish combinations. See pages 2-10 for additional technical
information.
Features
•Various trim options available
•Sprinklers and trim available in a wide variety of standard and
special application nishes
•Standard 1” NPT or ISO7-R1 inlet tting
•Listed corrosion resistant combinations of sprinkler and trim
available
Product Description
Model F3-80 dry sprinklers are standard-response, standard
coverage sprinklers with a nominal K-factor of 8.0 (115 metric).
Available in pendent and horizontal sidewall congurations,
Model F3-80 dry sprinklers utilize a 5mm glass bulb ordinary,
intermediate, or high temperature classication operating
element.
Model F3-80 dry sprinklers are intended for installation on wet
pipe, dry pipe, or preaction systems in accordance with NFPA 13
or other applicable installation standards.
Model F3-80 dry sprinklers are available in a variety of trim
options and nish combinations as shown on the following pages.
The Reliable escutcheons and cover plates shown are the only
escutcheons and cover plates listed for use with the sprinkler.
The use of any other escutcheon or cover plate will void all
guarantees, warranty, listing, and approvals.
Table A provides a basic summary of Model F3-80 dry sprinklers.
Additional technical information is provided on the following
individual sprinkler pages.
www.reliablesprinkler.com
K-factor 8.0 (115 metric)
Model F3-80 Series
Standard-Response Dry Sprinkler
Bulletin 060 November 2023

“A” Dimension
in (mm)
Temperature
Classication
Temperature Rating
°F (°C) Glass Bulb Color Approvals Sprinkler Guard
2” to 36” (50mm to
900mm) in 1/4” (6mm)
increments
Ordinary 155°F (68°C) Red
cULus N/A
Intermediate
175°F (79°C) Yellow
200°F (93°C) Green
High 286°F (141°C) Blue
Table B
Model F3-80 Dry Pendent: Standard Escutcheon - SIN RA6012
Model F3-80 Dry Pendent Sprinkler: Standard Escutcheon Figure 1
System Fitting
Inlet Fitting
1-5/8"
[41mm]
3" [76mm]
DIA.
2-1/8"
[54mm] Dia.
Hole in Ceiling
1/2" [12mm]
Nominal Protrusion
"A" Dimension Sprinkler Can
Escutcheon
Ceiling
1" [25mm]
Escutcheon
Adjustment
1/2" [12mm]
Escutcheon Adjustment
Nominal
Escutcheon
Position
1/2" [12mm]
COMDRYDET1
Note: The sprinkler can protrudes 1/2” (12mm) when escutcheon is in nominal position. Escutcheon ad-
justment provides -1/2” (12mm) to +1” (25mm) “A” dimension adjustment range.
Finish Combinations: Standard Escutcheon
Sprinkler Escutcheon(3)(4)
Bronze Polished Stainless
Bronze Laquered Brass
Chrome Polished Stainless
White Polyester(1) White Polyester
Black Polyester(1) Black Polyester
Custom Color Polyester(1) Custom Color Polyester
Electroless Nickel PTFE(1) Polished Stainless
Wax(1)(2) Polished Stainless
Lead(1) Polished Stainless
Wax over Lead(1)(2) Polished Stainless
Notes:
1. UL Listed as Corrosion Resistant.
2. Clear wax used on ordinary temperature rated sprinklers; brown
wax used on intermediate temperature rated sprinklers. Brown
wax may be used on high temperature rated sprinklers where the
ambient temperature does not exceed 150°F (66°C).
3. Escutcheons do not carry corrosion resistant listings.
4. Base material is 316 stainless steel unless noted.
Bulletin 060
November 2023
Page 2 of 16
www.reliablesprinkler.com

“A” Dimension
in (mm)
Temperature
Classication
Temperature Rating
F (C) Glass Bulb Color Approvals Sprinkler Guard
3½” to 36” (90mm to
900mm) in 1/4” (6mm)
increments
Ordinary 155°F (68°C) Red
cULus N/A
Intermediate
175°F (79°C) Yellow
200°F (93°C) Green
High 286°F (141°C) Blue
Table C
Model F3-80 Dry Pendent: HB Escutcheon - SIN RA6012
Model F3-80 Dry Pendent Sprinkler: HB Escutcheon Figure 2
Note: The sprinkler can protrudes 1¼” when escutcheon is in nominal position. Escutcheon adjustment
provides -½” (-12.7mm) to +½” (+12.7mm) “A” dimension adjustment range.
COMDRYDET2
System tee
2-1/2" [64 mm] Dia. Hole
in Ceiling
3-1/2" [89 mm]
Escutcheon Dia.
Ceiling
Sprinkler Can
Escutcheon
"A" Dimension
Inlet fitting
1-1/4" [32mm]
1/2" [13mm] Escutcheon
Adjustment
1/2" [13mm] Escutcheon
Adjustment
Nominal Position of
Escutcheon
Deflector distance below ceiling
is 3-1/2" (89mm) minimum,
4-1/2" (114mm) maximum.
Finish Combinations: HB Escutcheon
Sprinkler Escutcheon(3)(4)
Bronze Chrome
Chrome Chrome
White Polyester(1) White Polyester
Black Polyester(1) Black Polyester
Custom Color Polyester(1) Custom Color Polyester
Electroless Nickel PTFE(1) Stainless Steel
Wax(1)(2) Chrome
Lead(1) Stainless Steel
Wax over Lead(1)(2) Stainless Steel
Notes:
1. UL Listed as Corrosion Resistant.
2. Clear wax used on ordinary temperature rated sprinklers; brown
wax used on intermediate temperature rated sprinklers. Brown
wax may be used on high temperature rated sprinklers where the
ambient temperature does not exceed 150°F (66°C).
3. Escutcheons do not carry corrosion resistant listings.
4. Base material is cold rolled steel unless noted.
Bulletin 060
November 2023
Page 3 of 16
www.reliablesprinkler.com

“A” Dimension
in (mm)
Temperature
Classication
Temperature Rating
°F (°C) Glass Bulb Color Approvals Sprinkler Guard
31/2” to 36” (90mm to
900mm) in 1/4” (6mm)
increments
Ordinary 155°F (68°C) Red
cULus N/A
Intermediate
175°F (79°C) Yellow
200°F (93°C) Green
High 286°F (141°C) Blue
Table D
Model F3-80 Dry Pendent: FP Escutcheon - SIN RA6012
Model F3-80 Dry Pendent Sprinkler: FP Escutcheon Figure 3
Note: Do not install the Model F3-80 Dry Pendent sprinkler with the Model FP escutcheon in ceilings which
have positive pressure in the space above.
COMDRYDET3
Inlet Fitting
3-7/32"
[82 mm] Dia.
2-5/8" [67 mm] Dia.
Hole in Ceiling
"A" Dimension
Sprinkler
Cup
System Tee
Escutcheon
1/4" [6 mm]
Escutcheon Adjustment
1/4" [6 mm]
Escutcheon Adjustment
Nominal
Escutcheon Position
3/4" [19 mm] Nom.
Finish Combinations: FP Recessed
Sprinkler(1) Escutcheon(3)(4)
Bronze Brass
Chrome Chrome
White Polyester(2) White Polyester
Black Polyester(2) Black Polyester
Custom Color Polyester(2) Custom Color Polyester
Electroless Nickel PTFE(2) Stainless Steel
Notes:
1. Cup for FP Recessed is unnished galvanized steel except electro-
less nickel PTFE sprinklers which are provided with a stainless steel
cup
2. UL Listed as Corrosion Resistant.
3. Escutcheons do not carry corrosion resistant listings.
4. Base material is cold rolled steel unless noted.
Bulletin 060
November 2023
Page 4 of 16
www.reliablesprinkler.com

“A” Dimension
in (mm)
Temperature
Classication
Temperature Rating
F (C) Glass Bulb Color Approvals Sprinkler Guard
31/2” to 36” (90mm to
900mm) in 1/4” (6mm)
increments
Ordinary 155°F (68°C) Red
cULus N/A
Intermediate
175°F (79°C) Yellow
200°F (93°C) Green
High 286°F (141°C) Blue
Table E
Model F3-80 Dry Pendent: CCP Cover Plate - SIN RA6012
Model F3-80 Dry Pendent Sprinkler: CCP Cover Plate Figure 4
Note: Do not install the Model F3-80 Dry Pendent sprinkler with the Model CCP cover plate in ceilings
which have positive pressure in the space above.
COMDRYDET4
Ceiling
Inlet Fitting
3-5/16"
[84 mm] Dia.
2-1/2" [64 mm] Dia.
Hole in Ceiling
3/16" [5 mm]
Cover Plate Adjustment
"A" Dimension
3/16" [5 mm]
Cover Plate Adjustment
Sprinkler Cup
System Tee
Model CCP 1/2
Cover Plate Assembly
Nominal Cover
Plate Position
7/8"
[22 mm]
Finish Combinations: CCP Concealed
Sprinkler(1) Cover Plate(2)
Bronze
White Polyester
Chrome Bright
Chrome Dull
Bright Brass
Unnished Bronze
Black Plate
Custom Color
Notes:
1. Cup for CCP Concealed is unnished galvanized steel.
2. Cover plates do not carry corrosion resistant listings.
Bulletin 060
November 2023
Page 5 of 16
www.reliablesprinkler.com

Order Dimension
in (mm)
Temperature
Classication
Temperature Rating
°F (°C) Glass Bulb Color Approvals Sprinkler Guard
5” to 36” (125mm to
900mm) in 1/4” (6mm)
increments
Ordinary 155°F (68°C) Red
cULus N/A
Intermediate
175°F (79°C) Yellow
200°F (93°C) Green
High 286°F (141°C) Blue
Table F
Model F3-80 Dry Pendent: No Escutcheon - SIN R6012
Model F3-80 Dry Pendent Sprinkler: No Escutcheon Figure 5
System Fitting
Inlet Fitting
1-5/8" [41mm]
Ordering
Dimension COMDRYDET_NOCAN_PEND
Note: Customer is responsible for
determining the correct deflector distance
from the ceiling or structure above.
Ref.
Available Finishes
No Escutcheon Dry Pendent Sprinkler
Bronze
Chrome
White Polyester(1)
Custom Color Polyester(1)
Wax(1)(2)
Lead(1)
Wax Over Lead(1)(2)
Electroless Nickel PTFE(1)
COMING SOON!
Notes:
1. UL Listed as Corrosion Resistant.
2. Clear wax used on ordinary temperature rated sprinklers;
brown wax used on intermediate temperature rated sprin-
klers. Brown wax may be used on high temperature rated
sprinklers where the ambient temperature does not exceed
150°F (66°C).
Bulletin 060
November 2023
Page 6 of 16
www.reliablesprinkler.com

“A” Dimension
in (mm)
Temperature
Classication
Temperature Rating
°F (°C) Glass Bulb Color Approvals Sprinkler Guard
2” to 36” (50mm to
900mm) in 1/4” (6mm)
increments
Ordinary 155°F (68°C) Red
cULus
(Light & Ordinary Hazard Only)
N/A
Intermediate
175°F (79°C) Yellow
200°F (93°C) Green
High 286°F (141°C) Blue
Table G
Model F3-80 Dry Horizontal Sidewall: Standard Escutcheon - SIN RA6032
Model F3-80 Dry Horizontal Sidewall: Standard Escutcheon Figure 5
System Fitting
3"
[76mm]
Wall
1" [25mm]
Escutcheon
Adjustment
2-3/32"
[53mm]
Ceiling
1/2" [12mm]
Escutcheon Adjustment
2-1/8"
[54mm] Dia.
Hole in Wall
4" [100mm] Min.
12" [300mm] Max.
COMDRYDET6-A
Inlet Fitting
"A" Dimension
5/8" [16mm]
Nominal Escutcheon Position
Sprinkler Can 1/2" [12mm]
1/2" [12mm] Nominal Protrusion
Escutcheon
Note: The sprinkler can protrude 1/2” when escutcheon is in nominal position. Escutcheon adjustment
provides -1/2” (-12mm) to +1” (25mm) “A” dimension adjustment range.
Finish Combinations: Standard Escutcheon
Sprinkler Escutcheon(3)(4)
Bronze Polished Stainless
Bronze Laquered Brass
Chrome Polished Stainless
White Polyester(1) White Polyester
Black Polyester(1) Black Polyester
Custom Color Polyester(1) Custom Color Polyester
Electroless Nickel PTFE(1) Polished Stainless
Wax(1)(2) Polished Stainless
Lead(1) Polished Stainless
Wax over Lead(1)(2) Polished Stainless
Notes:
1. UL Listed as Corrosion Resistant.
2. Clear wax used on ordinary temperature rated sprinklers; brown
wax used on intermediate temperature rated sprinklers. Brown
wax may be used on high temperature rated sprinklers where the
ambient temperature does not exceed 150°F (66°C).
3. Escutcheons do not carry corrosion resistant listings.
4. Base material is 316 stainless steel unless noted.
Bulletin 060
November 2023
Page 7 of 16
www.reliablesprinkler.com

“A” Dimension
in (mm)
Temperature
Classication
Temperature Rating
°F (°C) Glass Bulb Color Approvals Sprinkler Guard
31/2” to 36” (90mm to
900mm) in 1/4” (6mm)
increments
Ordinary 155°F (68°C) Red
cULus
(Light & Ordinary Hazard Only) N/A
Intermediate
175°F (79°C) Yellow
200°F (93°C) Green
High 286°F (141°C) Blue
Table H
Model F3-80 Dry Horizontal Sidewall: HB Escutcheon - SIN RA6032
Model F3-80 Dry Horizontal Sidewall: HB Escutcheon Figure 6
Note: The sprinkler can protrudes 1¼” when escutcheon is in nominal position. Escutcheon adjustment
provides -½” (-12.7mm) to +½” (+12.7mm) “A” dimension adjustment range.
COMDRYDET7
System Tee
3-1/2"
[89mm]
Escutcheon Dia.
Nominal Position
of Escutcheon
Inlet Fitting
1/2" [13mm]
Escutcheon Adjustment
2 3/32"
[53mm]
Ceiling
"A" Dimension
Sprinkler Can
2 1/2" Dia.
[64mm]
Hole in Wall
4" [102mm] Min.
12" [305mm] Max.
Wall
1/2" [13mm]
Escutcheon
Adjustment
Escutcheon
1-1/4" [32mm] Nominal Protrusion
1-1/4"
[32mm]
5/8" [16mm]
Finish Combinations: HB Escutcheon
Sprinkler Escutcheon(3)(4)
Bronze Chrome
Chrome Chrome
White Polyester(1) White Polyester
Black Polyester(1) Black Polyester
Custom Color Polyester(1) Custom Color Polyester
Electroless Nickel PTFE(1) Stainless Steel
Wax(1)(2) Chrome
Lead(1) Stainless Steel
Wax over Lead(1)(2) Stainless Steel
Notes:
1. UL Listed as Corrosion Resistant.
2. Clear wax used on ordinary temperature rated sprinklers; brown
wax used on intermediate temperature rated sprinklers. Brown
wax may be used on high temperature rated sprinklers where the
ambient temperature does not exceed 150°F (66°C).
3. Escutcheons do not carry corrosion resistant listings.
4. Base material is cold rolled steel unless noted.
Bulletin 060
November 2023
Page 8 of 16
www.reliablesprinkler.com

“A” Dimension
in (mm)
Temperature
Classication
Temperature Rating
°F (°C) Glass Bulb Color Approvals Sprinkler Guard
31/2” to 48” (90mm to
900mm) in 1/4” (6mm)
increments
Ordinary 155°F (68°C) Red
cULus
(Light & Ordinary Hazard Only) N/A
Intermediate
175°F (79°C) Yellow
200°F (93°C) Green
High 286°F (141°C) Blue
Table J
Model F3-80 Dry Horizontal Sidewall: FP Escutcheon - SIN RA6032
Model F3-80 Dry Horizontal Sidewall: FP Escutcheon Figure 8
Note: Do not install the Model F3-80 Dry Horizontal Sidewall sprinkler with the Model FP escutcheon in
walls which are positively pressurized with respect to the protected space.
COMDRYDET8
Hole in Wall
3-7/32"
[82 mm] Dia.
2-1/2"
[64 mm] Dia.
"A" Dimension
1-1/4"
[32 mm]
System Tee
Wall
4" [100 mm] Min.
12" [300 mm] Max.
Ceiling
Sprinkler Cup
Escutcheon
1/4" [6 mm]
1/4" [6 mm]
Escutcheon Adjustment
Escutcheon Adjustment
Nominal Escutcheon Position
5/8" [16 mm]
Inlet Fitting
Nom.
Finish Combinations: FP Recessed
Sprinkler(1) Escutcheon(3)(4)
Bronze Brass
Chrome Chrome
White Polyester(2) White Polyester
Black Polyester(2) Black Polyester
Custom Color Polyester(2) Custom Color Polyester
Electroless Nickel PTFE(2) Stainless Steel
Notes:
1. Cup for FP Recessed is unnished galvanized steel except electro-
less nickel PTFE sprinklers which are provided with a stainless steel
cup
2. UL Listed as Corrosion Resistant.
3. Escutcheons do not carry corrosion resistant listings.
4. Base material is cold rolled steel unless noted.
Bulletin 060
November 2023
Page 9 of 16
www.reliablesprinkler.com

Order Dimension
in (mm)
Temperature
Classication
Temperature Rating
°F (°C) Glass Bulb Color Approvals Sprinkler Guard
5” to 36” (125mm to
900mm) in 1/4” (6mm)
increments
Ordinary 155°F (68°C) Red
cULus
(Light & Ordinary Hazard Only)
N/A
Intermediate
175°F (79°C) Yellow
200°F (93°C) Green
High 286°F (141°C) Blue
Table I
Model F3-80 Dry Horizontal Sidewall: No Escutcheon - SIN R5334
Model F3-80 Dry Horizontal Sidewall: No Escutcheon Figure 7
System Fitting 1-5/8"
[41mm]
Ref.
4" [100mm] Min.
12" [300mm] Max.
COMDRYDET_NOCAN_HSW
Inlet Fitting
Ordering Dimension
5/8" [16mm]
Bottom of Deck or Ceiling
Note: Customer is responsible for determining the correct distance
from the wall to the sprinkler deflector.
Available Finishes
No Escutcheon Dry Pendent Sprinkler
Bronze
Chrome
White Polyester(1)
Custom Color Polyester(1)
Wax(1)(2)
Lead(1)
Wax Over Lead(1)(2)
Electroless Nickel PTFE(1)
Notes:
1. UL Listed as Corrosion Resistant.
2. Clear wax used on ordinary temperature rated sprinklers;
brown wax used on intermediate temperature rated sprin-
klers. Brown wax may be used on high temperature rated
sprinklers where the ambient temperature does not exceed
150°F (66°C).
Bulletin 060
November 2023
Page 10 of 16
www.reliablesprinkler.com
COMING SOON!