Ruijie RG-RSR77 Series Installation and operating manual

RG-RSR77 Series Router
Hardware Installation and Reference Guide V1.07

Copyright statement
Ruijie Networks©2000-2013
Ruijie Networks reserves all copyrights of this document. Any reproduction, excerption, backup,
modification, transmission, translation or commercial use of this document or any portion of this document,
in any form or by any means, without the prior written consent of Ruijie Networks is prohibited.
, , , ,
,,
,, ,
, , are registered trademarks of Ruijie
Networks. Counterfeit is strictly prohibited.
Exemption statement
This document is provided “as is”. The contents of this document are subject to change without any notice.
Please obtain the latest information through the Ruijie Networks website. Ruijie Networks endeavors to
ensure content accuracy and will not shoulder any responsibility for losses and damages caused due to
content omissions, inaccuracies or errors.

Preface
Thank you for using our products. This manual will guide you through the installation of the router.
Scope
It is intended for the users who have some experience in installing and maintaining network hardware. At
the same time, it is assumed that the users are already familiar with the related terms and concepts.
Obtaining Technical Assistance
Ruijie Networks website: http://www.ruijienetworks.com/
Online customer services: http://webchat.ruijie.com.cn
Customer service center: http://www.ruijie.com.cn/service.aspx
Customer services hotline: [phone]
BBS: http://support.ruijie.com.cn
Customer services email: [email protected]
Related Documents
Documents Description
Configuration Guide Describes network protocols and related mechanisms that
supported by the product, with configuration examples.
Command Reference
Describes the related configuration commands, including
command modes, parameter descriptions, usage guides, and
related examples.
Documentation Conventions
The symbols used in this document are described as below:
This symbol brings your attention to some helpful suggestions and references.
This symbol means that you must be extremely careful not to do some things that may
damage the device or cause data loss.

Chapter 1 Product Overview
The Ruijie RSR77 series router is a data communication product independently developed by Ruijie
Networks Co. Ltd. by using advanced semiconductor technologies and communication control
technologies. Ruijie RSR77 series router is developed in full compliance with international standards;
therefore, it is similar to major routers in terms of use and configuration approach. Network administrators
who are familiar with the configuration commands of major routers may use the routers without receiving
training first.
About theRSR77
Adopting distributed and modularized design, Ruijie RSR77 series routers boast robust processing
capacity and greater access density and support dual master hot standby and redundant power supplies,
providing users with abundant optional modules. They can serve as either core routers on large-sized
Intranet or convergence-layer routers on large-sized industrial network.
Equipped with high-performance microprocessor and running the proprietary network operating system
independently developed by Ruijie Networks, Ruijie RSR77 series routers support BGP routing protocol
and IP multicast protocol and boast high forwarding rate and rich QoS features. It can provide all-around
network solutions for telecom, dedicated network, ISP, banking, taxation, public security, and railway
users, as well as for large- and medium-sized businesses.
There are three models for this series, namely RSR7704, RSR7708 and RSR7716, which are all
modularized routers.
RSR7704 has four horizontal slots, supports dual master control modules and the redundant
backup of master control module, and provides two horizontal service slots to support up to four
service processing modules.
RSR7708 has six horizontal slots, supports dual master control modules and the redundant backup
of master control module, and provides four horizontal service slots to support up to eight service
processing modules.
RSR7716 has ten horizontal slots, supports dual master control modules and the redundant backup
of master control module, and provides eight horizontal service slots to support up to 16 service
processing modules.
Except for the chassis, control module and fan tray, all other line cards can be used on any model, and
the following modules are supported:
Host Model RSR7704 RSR7708 RSR7716
Router
Control
Module
RSR7704-SRCMI RSR7708-SRCMI
RSR7716-SRCMI
Fan Module RSR7704-FAN RSR7708-FAN RSR7716-FAN

RG-PA300I AC power module
Power
Module RG-PD650I DC power module
Service Modules
RSR77-SIP1 Each RSR77-SIP1 module carrier board supports two FNM modules.
Model Name
FNM-4GE-1 4-port 1000 Mbps Ethernet fiber/copper
combo Type I module
FNM-2CPOS-STM1 2-port 155 Mbps channelized POS interface
module
FNM-4POS-STM1 4-port 155 Mbps POS interface module
FNM-8GE 8-port 1 Gigabit Ethernet fiber/copper
combo module
FNM-2XS 2-port 10 Gigabit Ethernet fiber module
FNM Series
Module
FNM-1CPOS-STM16/4CPOS-STM4 1-port 2.5 Gigabit POS/CPOS or 4-port
622/155 Mbps POS/CPOS interface
module
RSR77-SIP2 The RSR77-SIP2 module carrier board fixes two fiber/copper combo GE ports and
supports full- and half-height NME modules. Each RSR77-SIP2 module carrier board
supports up to two NME half-height modules or one DNME full-height module.
Model Name
NME-6FE 6-port 100 Mbps Ethernet copper module
NME-1POS-STM1 1-port 155 Mbps POS interface module
NME-1ATM-STM1 1-port ATM interface module
NME-4HS 4-port high-speed synchronous serial port
module
DNME-8E1/CE1 8-port E1/CE1 interface module
NME/DNME
Series
Module
DNME-SEC Encryption module
Insert the DFNM module into the horizontal slot without SIP1/SIP2 carrier board
Model Name
DFNM-8GE 8-port 1000 Mbps Ethernet fiber/copper
combo module
DFNM-2XFP 2-port 10 Gigabit Ethernet fiber module
DFNM-48SFP 48-port 1000 Mbps Ethernet fiber module
DFNM Series
Module
DFNM-32GT/16SFP 32-port 1000 Mbps copper module and
16-port 1000 Mbps fiber module
While purchasing Ruijie RSR77 series modularized routers, the user can select the corresponding
functional modules according to his actual needs. The principles for module selection are given below:
RSR77-SIP1 supports FNM functional modules
RSR77-SIP2 supports NME/DNME functional modules
The module carrier slot is irrelevant to the service slot of router.
The selection of interface cable for functional module is directly related to the functional module.

Please refer to the following sections for details about relevant functional modules.
All board cards support hot swap, and the procedures thereof are given in the software
manual.
Product Features
Convergence and processing capacity
RSR77 enables high speed forwarding through 1000M Ethernet ports. Therefore, it can serve as the core
router of large-sized enterprises and the convergence-layer routers on large-sized industrial network.
Reliability
Backup center technology greatly improves network reliability and provides various backup modes for
high reliability requirements.
Compatibility
RSR77 is fully compatible with equipments of other suppliers.
Power supply
RSR77 adopts GB4943-compliant power supplies to prevent surging, over-voltage, under-voltage and
over-current for stable and reliable output with instant power-failure protection.
Appearance
RSR77 adopts standard 19 in. chassis, which is set on the rack and can resist electromagnetic radiation,
shock, high and low temperature.
Certificate
The router has passed the network access license (NAL) testing by the Ministry of Information Industry
(MII), P.R. China.
Product Images of the RSR7704 Router
Front Panel
Figure 1-1 Front panel of the RSR7704 router

Note: 1: Fan tray module slot
2: Master control module slot M2
3: Master control module slot M1
4: Service module slot 2
5: Service module slot 1
Back Panel
Figure 1-2 Back panel of the RSR7704 router
Note: 1: Air filter slot
2: Power supply slot 2
3: Power supply slot 1
4: Reserved POE power supply slot
5: Power supply module handle
6: Chassis earthing terminal
Remarks: There is no POE power supply slot on the back panel of RSR7704 V1.10 chassis, and different
fan modules are used. Chassis of V1.1X and later versions use the fan of V1.10, while Chassis of V1.0X
use the fan of V1.00. DFNM series line cards and
FNM-8GE/FNM-2XS/FNM-1CPOS-STM16/4CPOS-STM4 are compatible with the RSR77 series V1.XX
host, but with the following restrictions:
They are not applicable to the Slot4 of RSR7708 V1.0 host.
They are not applicable to the Slot5, Slot8 of RSR7716 V1.0 host.
Product Images of the RSR7708 Router
Front Panel

Figure 1-3 Front panel of the RSR7708 router
Note: 1: Fan tray module slot
2: Service module slot 4
3: Service module slot 3
4: Master control module slot M2
5: Master control module slot M1
6: Service module slot 2
7: Service module slot 1
Figure 1-4 Back panel of the RSR7708 router
Note: 1: Air filter slot
2: Power supply slot 3
3: Power supply slot 2
4: Power supply slot 1
5: Power supply module handle 1
6: Chassis earthing terminal
7: Reserved POE power supply slot
Remarks: There is no POE power supply slot on the back panel of RSR7708 V1.10 chassis, and different
fan modules are used. Chassis of V1.1X and later uses the fan of V1.10. Chassis of V1.0X uses the fan
of V1.00.
DFNM series line cards and FNM-8GE/FNM-2XS/FNM-1CPOS-STM16/4CPOS-STM4 are compatible
with the RSR77 series V1.XX host, but with the following restrictions:

They are not applicable to the Slot4 of RSR7708 V1.0 host.
They are not applicable to the Slot5, Slot8 of RSR7716 V1.0 host.
Product Images of the RSR7716 Router
Front Panel
Figure 1-5 Front panel of the RSR7716 router
Note: 1: Fan tray module slot
2: Service module slot 8
3: Service module slot 7
4: Service module slot 6
5: Service module slot 5
6: Master control module slot M2
7: Master control module slot M1
8: Service module slot 4
9: Service module slot 3
10: Service module slot 2
11: Service module slot 1
Back Panel
Figure 1-6 Back panel of the RSR7716 router

Note: 1: Air filter slot
2: Power supply slot 4
3: Power supply slot 3
4: Power supply slot 2
5: Power supply module handle
6: Chassis earthing terminal
7: Power supply slot 1
8: Reserved POE power supply slot
Technical Specifications of RSR77 Series Routers
Table 1-1 Technical Specifications of the RSR7704 Router
Model RSR7704 Remarks
Module slot 4 2 for main control module
Main control module slot 2 Users can set up to 2 main control modules
Service module slot 2 Users can set up to 2 function modules as required on
each carrier board.
Power slot 2 RSR7704 can set up to 2 powers.
Hot plugging Supported Cooperates with software version for use.
Main control redundancy Supported Requires double main control modules.
Interface Type
User interface type 100BASE-T RJ45
10/100/1000BASE-TX RJ45
1000BASE-X-SFP
10GBASE-LAN-XFP

10GBASE-LAN/WAN-SFP+
STM-1 POS SFP
STM-1 CPOS SFP
STM-4 POS SFP
STM-4 CPOS SFP
STM-16 POS SFP
STM-16 CPOS SFP
E1/CE1, HS, ATM,
Power/Fan
Power RG-PA300I:100-240V; 50/60Hz; maximum power: 400W
RG-PD650I:-36-72V; maximum power: 650W
Power redundancy AC power and DC power both support 1+1 redundancy.
POE external power Not supported
Fan RSR7704-FAN
Power Consumption (Full Configuration)
Overall power
consumption
≤400W
Current (Full Configuration)
Overall maximum AC 2*6A=12A
Overall maximum DC 2*25A=50A
Environment
EMI: GB9254, compliant with FCC Class AEMC
EMS: GB/T 17618-1998
Operating temperature 0 to 45°C (below 3000m)
Storage temperature -40 to 70°C
Operating humidity 10% to 90% RH
Operating altitude/height -60 to 5000m
Weight
Weigh (full configuration
without package)
≤35KG
Dimensions
Dimensions
(L x W x H) 440mm x 480mm x 224.6mm
Table 1-2 Technical Specifications of the RSR7708 Router
Model RSR7708 Remarks
Module slot 6 2 for main control module
Main control module slot 2 Users can set up to 2 main control modules
Service module slot 4 Users can set up to 2 function modules as required on
each carrier board.
Power slot 3 RSR7704 can set up to 3 powers.
Hot plugging Supported Cooperates with software version for use.

Main control redundancy Supported Requires double main control modules.
Interface Type
User interface type 100BASE-T RJ45
10/100/1000BASE-TX RJ45
1000BASE-X-SFP
10GBASE-LAN-XFP
10GBASE-LAN/WAN-SFP+
STM-1 POS SFP
STM-1 CPOS SFP
STM-4 POS SFP
STM-4 CPOS SFP
STM-16 POS SFP
STM-16 CPOS SFP
E1/CE1, HS, ATM,
Power/Fan
Power RG-PA300I:100-240V; 50/60Hz; maximum power: 400W
RG-PD650I:-36-72V; maximum power: 650W
Power redundancy AC power supports N+1 redundancy (1+1 or 2+1 redundancy determined
by line card configuration) and DC power supports 1+1 redundancy.
POE external power Not supported
Fan RSR7708-FAN
Power Consumption (Full Configuration)
Overall power
consumption
≤650W
Current (Full Configuration)
Overall maximum AC 3*6A=18A
Overall maximum DC 3*25A=75A
Environment
EMI: GB9254, compliant with FCC Class AEMC
EMS: GB/T 17618-1998
Operating temperature 0 to 45°C (below 3000m)
Storage temperature -40 to 70°C
Operating humidity 10% to 90% RH
Operating altitude/height -60 to 5000m
Weight
Weigh (full configuration
without package)
≤50KG
Dimensions
Dimensions
(L x W x H) 440mm x 480mm x 312.9mm
Table 1-3 Technical Specifications of the RSR7716 Router
Model RSR7704 Remarks

Module slot 10 2 for main control module
Main control module slot 2 Users can set up to 2 main control modules
Service module slot 8 Users can set up to 2 function modules as required on
each carrier board.
Power slot 4 RSR7704 can set up to 4 powers.
Hot plugging Supported Cooperates with software version for use.
Main control redundancy Supported Requires double main control modules.
Interface Type
User interface type 100BASE-T RJ45
10/100/1000BASE-TX RJ45
1000BASE-X-SFP
10GBASE-LAN-XFP
10GBASE-LAN/WAN-SFP+
STM-1 POS SFP
STM-1 CPOS SFP
STM-4 POS SFP
STM-4 CPOS SFP
STM-16 POS SFP
STM-16 CPOS SFP
E1/CE1, HS, ATM,
Power/Fan
Power RG-PA300I:100-240V; 50/60Hz; maximum power: 400W
RG-PD650I:-36-72V; maximum power: 650W
Power redundancy AC power supports N+1 redundancy and DC power supports N+1 or N+N
redundancy.
POE external power Not supported
Fan RSR7716-FAN
Power Consumption (Full Configuration)
Overall power
consumption
≤1200W
Current (Full Configuration)
Overall maximum AC 4*6A=24A
Overall maximum DC 4*25A=100A
Environment
EMI: GB9254, compliant with FCC Class AEMC
EMS: GB/T 17618-1998
Operating temperature 0 to 45°C (below 3000m)
Storage temperature -40 to 70°C
Operating humidity 10% to 90% RH
Operating altitude/height -60 to 5000m
Weight
Weigh (full configuration ≤80KG

without package)
Dimensions
Dimensions
(L x W x H) 440mm x 480mm x 495.7mm
Introduction to Chassis of the RSR77 Series Routers
Introduction to the RSR7704 Chassis
Figure 1-7 Front perspective of the RSR7704
Note: 1: Fan slot
2: Fan handle
3: Chassis handle on the front panel
4: Handles at the top of the chassis
5: ESD wrist strap jack
6: Air intake
Figure 1-8 Back perspective of the RSR7704

Note: 1: Air filter slot
2: Power supply module handle
3: Chassis earthing terminal
4: Air outlet
Introduction to the RSR7708 Chassis
Figure 1-9 Front perspective of RSR7708
Note: 1: Fan slot
2: Fan handle
3:ESD wrist strap jack
4: Chassis handle on the front panel
5: Handles at the top of the chassis
6: Air intake

Figure 1-10 Back perspective of RSR7708
Note: 1: Air filter slot
2: Power supply module handle
3: Chassis handle on the front panel
4: Air outlet
Introduction to the RSR7716 Chassis
Figure 1-11 Front perspective of RSR7716
Note: 1: Fan slot
2: Fan handle
3: Chassis handle on the front panel
4: Handles at the top of the chassis
5: ESD wrist strap jack
6: Air intake
Figure 1-12 Back perspective of RSR7716

Note: 1: Air filter slot
2: Power supply module handle
3: Chassis earthing terminal
4: Air outlet
The chassis-top handles have a weight limit of 80 kg.
Do not use fan handles to move the chassis.
Do not use power supply module handles to move the chassis.
About Control Modules
Sections about RSR7704-SRCMI, RSR7708-SRCMI and RSR7716-SRCMI control modules are
applicable to RSR77 series core routers.
RSR7704-SRCMI Control Module
Image and Indicators
Figure 2-1 Appearance of the RSR7704-SRCMI V1.0X

Figure 2-2 Appearance of the RSR7704-SRCMI V1.1X
RSR7704-SRCMI module has 13 indicators and one button, and the meanings are shown in table 2-1:
Table 2-1 Introduction to the indicators and the button on the front panel of the RSR7704-SRCMI
Mark Note Description
Master Master/slave
status indicator
Off: This control board is a slave control module.
Solid green: This control board is a master control module.
System System status
indicator
Off: The module is not powered on, it is not properly inserted,
or the slave control module is removed.
Solid red: The module is abnormal.
Blinking green: The module is initializing.
Solid green: The module has completed initialization and
functions normally;
Fan Fan status
indicator
Off: The fan tray does not exist.
Solid red: The fan tray is abnormal.
Solid green: The fan tray functions normally.
Power1
Power2
Power supply
status indicator
(corresponding to
power supply slot
1 and slot 2)
Off: The power supply module does not exist.
Solid red: The power supply module is abnormal, or is not
powered on.
Solid green: The power supply module functions normally.
Blinking red: Insufficient power supply.
S1
S2
Line card status
indicator
Off: The line card module does not exist, it is not properly
inserted, or the line card module is removed.
Solid red: The line card module is abnormal.
Blinking green: The line card module is initializing; if it keeps
blinking, the module may become abnormal.
Solid green: The line card module functions normally.
SD SD card status
indicator
Off: The SD card does not exist, it is not properly inserted, or
the line card module is removed.
Solid red: The device is abnormal.
Blinking green: reading SD card.
Solid green: The device functions normally.
USB0/0
USB0/1
USB status
indicator
Off: The USB device does not exist or has been removed.
Solid red: The USB device is abnormal.

Mark Note Description
Blinking green: reading USB device.
Solid green: The device functions normally.
U-Console USB serial port
status indicator
Off: USB serial port is not enabled.
Solid green: USB serial port is enabled.
It is supported on V1.1X while not on V1.0X.
Link/ACT Ethernet status
indicator
Off: Connection not established.
Blinking green: Data being transferred on the network.
Solid green: The port has established connection with another
network device.
1000M 1000M status
indicator
Solid green: The transmission rate is 1000Mbps.
Off: The transmission rate is 100Mbps or 10Mbps.
FUNC Reset/upgrade
button
It is supported on V1.1X while not on V1.0X.
The console is a combo port for the U-console and only one of them can be used at a time.
If a U-console is connected with a PC successfully, the U-console LED is green and the
enabled serial port is switched to the U-console. If there is no U-console connection, the
U-console LED is off and the enabled serial port is the console by default.
Features
Table 2-2 Technical Specifications of the RSR7704-SRCMI
Item RSR7704-SRCMI
CPU High-speed RISC processor
BOOTROM 2 MB
Flash Memory 512 MB
DDR2 SDRAM 2 GB
Fuse F1 : 10A/125V
External interface 1 Console port
1 AUX port
1 MGMT port
2 USB 2.0 interfaces
1 SD interface
1 U-Console port (supported on the board of V1.1 and higher)
1 FUNC button (supported on the board of V1.1 and higher)
Maximum power consumption ≤45 W
RSR7704-SRCMI Control Module
Image and Indicators

Figure 2-3 Appearance of the RSR7708-SRCMI V1.0
Figure 2-4 Appearance of the RSR7708-SRCMI V1.1X
RSR7708-SRCMI module has 16 indicators and one button, and the meanings are shown as follows:
Table 2-3 Introduction to indicators and the button on the front panel of the RSR7708-SRCMI
Mark Note Description
Master Master/slave status
indicator
Off: This control board is a slave control module.
Solid green: This control board is a master control
module.
System System status
indicator
Off: The module is not powered on, it is not properly
inserted, or the slave control module is removed.
Solid red: The module is abnormal.
Blinking green: The module is initializing.
Solid green: The module has completed initialization and
functions normally.
Fan Fan status indicator
Off: The fan tray does not exist.
Solid red: The fan tray is abnormal.
Solid green: The fan tray functions normally.
Power1
Power2
Power3
Power supply status
indicator
(corresponding to
power supply slot 1,
slot 2 and slot 3)
Off: The power supply module does not exist
Solid red: The power supply module is abnormal, or is not
powered on.
Solid green: The power supply module functions normally.
Blinking red: Insufficient power supply.
S1
S2
S3
S4
Line card status
indicator
Off: The line card module does not exist, it is not properly
inserted, or the line card module is removed.
Solid red: The line card module is abnormal.
Blinking green: The line card module is initializing; if it
keeps blinking, the module may become abnormal.
Solid green: The line card module functions normally.
SD SD card status
indicator
Off: The SD card does not exist, it is not properly inserted,
or the line card module is removed.
Solid red: The device is abnormal.
Blinking green: reading SD card.
Solid green: The device functions normally.
USB0/0 USB status indicator Off: The USB device does not exist or has been removed.