Salto AF i 2 Series User manual

225415-ED.-07/07/2017
All contents current at time of publication.
SALTO Systems S.L. reserves the right to change availability of any
item in this catalog, its design, construction, and/or materials.
© 2017 SALTO Systems S.L.
1/4
The mounting with other spindles voids the guaranty.
Le montage d'autres carrés annulera le garantie.
El montaje de otros cuadradillos anula la garantia.
NOTE: Screws and spindles are included in the box of the reader.
NOTE: Les vis et les carrés sont inclus dans la boite du lecteur.
NOTA:Los tornillos y cuadradillos están incluidos en la caja del lector.
Eng
E
F
Installation guide
Guide d'installation
Guía de instalación
*****
OUTSIDE
EXTÉRIEUR
EXTERIOR
INSIDE
INTÉRIEUR
INTERIOR
Only SALTO spindle.
Seulement carrés SALTO.
Solo cuadradillos SALTO.
7"
(178mm)
1-1/16"
(27mm)
1 15/64"
(31,5mm)
6"
(152mm)
O 1-25/32"
(
O 45mm)
21/64"
(8mm)
Only for WOOD doors.
Seulement pour portes en BOIS.
Solo para puertas de MADERA.
AF i 2 xx.. series
AF i
7 xx.. series
==
= =
1-3/4" (44,5mm)<Door thickness<2-3/4" (70mm).
1-3/4" (44,5mm)<Épaisseur d' porte<2-3/4" (70mm).
1-3/4" (44,5mm)<Espesor de puerta<2-3/4" (70mm).
Mortise lock not included
Serrure à mortaiser non inclusa
Cerradura de embutir no incluida
Recommendation for Customer’s lever set installation on SALTO
AElement. See : 4AN01299
Optional
Opcional
Optionnel
*
(*) Only for door thickness > 2-9/16" (65mm).
(*) Seulement pour portes de épaisseur > 2-9/16" (65mm).
(*) Solo para grosor de puerta > 2-9/16" (65mm).
SALTO LA1T0770F2
SALTO LA1T0770F7
SALTO LA1T1770F2
SALTO LA1T1770F7
Inside lever
Inside spindle
Privacy t umbturn
Outside spindle
Reader
Reader cover
Batteries
(LR06 AA)
Fixing screws
Control
Outside lever
Inside
Intérieur
Interior
Outside
Extérieur
Exterior
PZ2 (X2)
PZ2 (X2)
BOLT (Depending
on door thickness)
PZ1 (X2)
PZ2 (X2)
ALLEN 3(X2)
Control front plate
CABLE CLAMP(X2)
Recommandation pour l’installation des béquilles client sur
Salto AElement. Voir: 4AN01299
Recomendaciones para la instalación de manillas Cliente en
SALTO AElement. Ver: 4AN01299
For door preparation see: 221373 or 4DS00020.
Pour préparation de la porte, voir: 221373 ou 4DS00020.
Para mecanizado de puerta, ver: 221373 ó 4DS00020.
Installation guide
AElement Fusion for ANSI mortise locks

225415-ED.-07/07/2017
All contents current at time of publication.
SALTO Systems S.L. reserves the right to change availability of any
item in this catalog, its design, construction, and/or materials.
© 2017 SALTO Systems S.L.
2
1
3
6
Use a semirigid wire
Utilise un càble semi-rigide
Use un cable semirígido
*
*
INSIDE
INTERIEUR
INTERIOR
The groove must be on the same side than the grub screw.
La rainure doit être du côté de la vis.
La ranura en el lado del prisionero.
TORX 25
PH2
5
Real size
Real size
click!
Real size
Installation Installation Instalación
Eng
FE
4
UP
UP
PZ1
2/4
2.1 2.2
Installation guide
AElement Fusion for ANSI mortise locks
2/4

225415-ED.-07/07/2017
All contents current at time of publication.
SALTO Systems S.L. reserves the right to change availability of any
item in this catalog, its design, construction, and/or materials.
© 2017 SALTO Systems S.L.
Cable connection Câble de raccordement Conexión cableado
Eng
FE
Select an option depending on the position of the reader (a or b).
Sélectionnez une option en fonction de la position du lecteur (a ou b).
Seleccionar una opción dependiendo de la posición del lector (a ó b).
8
9
Plug
Branchez
Conectar
Plug
Branchez
Conectar
Mortise lock cable
Câble serrure
Cable cerradura
Câble lecteur
Cable lector
8
9
Plug
Branchez
Conectar
Câble serrure
Cable cerradura
Câble lecteur
Cable lector
Reader cable
Plug
Branchez
Conectar
a
7 7
Mortise lock cable
Reader cable
b
Lock
Serrure
Cerradura
Reader
Lecteur
Lector
8.1 8.1
8.2
8.2
Real size
9.1
9.2
9.1
9.2
Lock
Serrure
Cerradura
Reader
Lecteur
Lector
Installation guide
click! click!
AElement Fusion for ANSI mortise locks
3/4

225415-ED.-07/07/2017
All contents current at time of publication.
SALTO Systems S.L. reserves the right to change availability of any
item in this catalog, its design, construction, and/or materials.
© 2017 SALTO Systems S.L.
10
PH2
Real size
11
+
+
+
12
13
PZ2
AT THIS POINT DO NOT
CLOSE THE DOOR
PROGRAM THE LOCK FIRST
Follow user manual
Consultez le manuel utilisateur
Eng
E
NO CIERRE LA PUERTA. PROGRAME
LA CERRADURA
Consulte el manual del usuario
NE FERMEZ PAS LA PORTE.
PROGRAMMEZ LA BÉQUILLE AVANT
F
Real size
LR06
AA
1
2
Installation guide
AElement Fusion for ANSI mortise locks
Emergency opening Ouverture d'urgence Apertura de emergencia
Eng FE
1 2
C
3
ab
Use and mainteinance L'utilisation et l'entretien Uso y mantenimiento
Eng
F E
PPD800
Operating conditions: 0ºC<t<60ºC.
Condition de fonctionnement:0ºC<t<60ºC.
Condiciones de funcionamiento: 0ºC<t<60ºC.
To use in non condensing environments.
Pour des environnement sans condensation.
Para uso en entornos sin condensación.
No cover plates.
Sans plaques de propeté.
No placas embellecedoras.
Battery change Remplacer les piles Cambio de pilas
Eng E
F
MAX.40"
Change/Remplacer/ Cambio
4/4

SALTO SYSTEMS S.L. www.saltosystems.com 1/2 xxxxxx-ED.-14/12/2017
Pol. Lanbarren, c/Arkotz nº9, 20180 Oiartzun, Spain.
All contents current at time of publication. SALTO Systems S.L. reserves the right to change availability of any item in this catalog, its design, construction, and/or materials.
Compliance
PRODUCTS DESCRIPTION
PRODUCT
TECHNOLOGY
SOFTWARE
COMMERCIAL NAME
MODEL
RFID
BLUETOOTH SMART
CONTROL
BLUETOOTH
MODULE(S)
AElement Fusion
E1723
AF0B
x
x
0141
0136
AF0J
x
x
0145
0136
AF0D
x
x
0146
0136 / -
AElement Original
E1009
AEB
x
x
0135
0136
AEJ
x
x
0147
0136
AES
x
x
0139
-
XS4 One
E1722
E97
x
0128
EB7
x
x
0134
0136
EJ7
x
x
0150
0136
XS4 mini ANSI
E1721
C92
x
0128
CB2
x
x
0134
0136
CJ2
x
x
0150
0136
XS4 Locker
E1011
L90
x
0054
EU COMPLIANCE STATEMENT
EN Hereby, SALTO Systems S.L. (Arkotz Kalea (Pol. Lanbarren), 9 –20180 Oiartzun–Spain), declares that this access control equipment is in compliance with the essential
requirements and other relevant provisions of Directive 2014/53/EU (RED) and 2011/65/EU (RoHS). You will be able to find a copy of the original declaration of conformity
at the following Internet address: http://www.saltosystems.com/certificate
ES Por medio de la presente SALTO Systems S.L. (Arkotz Kalea (Pol. Lanbarren), 9 –20180 Oiartzun–Spain) declara que este equipo de control de accesos cumple con los
requisitos esenciales y cualesquiera otras disposiciones aplicables o exigibles de la Directiva 2014/53/UE (RED) y 2011/65/UE (RoHS). Podrá encontrar una copia de la
declaración de conformidad original en la siguiente dirección de internet: http://www.saltosystems.com/certificate
FR Par la présente SALTO Systems S.L. (Arkotz Kalea (Pol. Lanbarren), 9 –20180 Oiartzun–Spai dlae ue l’appareil équipement pour le contôle d’as est ofoe
aux exigences essentielles et aux autres dispositions pertinentes de la directive 2014/53/UE (RED) et 2011/65/UE (RoHS). Vous pouvez télécharger une copie de la
dlaatio de ofoit oigiale à taes l’adesse suiate: http://www.saltosystems.com/certificate
DE Hiermit erklärt SALTO Systems S.L. (Arkotz Kalea (Pol. Lanbarren), 9-20180 Oiartzun-Spain) dass sich das Gerät Zutrittskontrollgeräte im Übereinstimmung mit den
grundlegendenAnforderungen und den übrigen einschlägigen Bestimmungen derRichtlinie 2014/53/EU (RED) befindet und 2011/65/EU (RoHS). Eine Kopie der originalen
Konformitätserklärung finden Sie auf der folgenden Internetseite: http://www.saltosystems.com/certificate
NL Hierbij verklaart SALTO Systems S.L. (Arkotz Kalea (Pol. Lanbarren), 9 –20180 Oiartzun–Spain) dat het toestel toegangscontroleapparatuur in overeenstemming is met
de essentiële eisen en de andere relevante bepalingen van richtlijn 2014/53/EU (RED) en 2011/65/EU (RoHS). U kunt een kopie van de originele verklaring van
overeenstemming vinden op het volgende internetadres: http://www.saltosystems.com/certificate
PT A SALTO Systems S.L. declara que este equipamento de controlo de acessos está conforme os requisitos essenciais e outras disposições da Diretiva 2014/53/UE (RED) e
2011/65/EU (RoHS). Poderá encontrar uma cópia da declaração de conformidade original na seguinte direção de internet: http://www.saltosystems.com/certificate
ELECTRICAL WARNINGS
Caution: Risk of explosion if battery is replaced by an incorrect type. Dispose of used batteries according to the instructions.
Recommended batteries:
Simply Duracell AAA (MN2400)
Varta Industrial AA (04006)
Varta High Energy AAA (04903)
Varta Longlife AA (04106)
Varta Longlife AAA (04103)
Duracell Ultra CR2 Lithium (DLCR2)
Varta Industrial AAA (04003)
Panasonic CR2 Lithium
Simply Duracell AA (MN1500)
Panasonic CR2 Lithium Industrial
Varta High Energy AA (04906)

SALTO SYSTEMS S.L. www.saltosystems.com 2/2 xxxxxx-ED.-14/12/2017
Pol. Lanbarren, c/Arkotz nº9, 20180 Oiartzun, Spain.
All contents current at time of publication. SALTO Systems S.L. reserves the right to change availability of any item in this catalog, its design, construction, and/or materials.
Compliance
FRECUENCY / OUTPUT MAXIMUM POWER
TECHNOLOGY
OPERATING FRECUENCY
OUTPUT MAX. POWER
RFID
13.56 MHz
+25 dBm
Bluetooth Smart
2400 –2483.5 MHz
+8 dBm / + 2.8 dBm
MECHANICAL WARNINGS
In order to confirm the correct operation of this electronic device, SALTO recommends using it in combination with a lock destined for that use (door mass, frequency of use, fire
door, etc) and that is in good operational conditions. The SALTO product should be treated with care during the installation process to avoid any aggressive contact that may damage
the unit. It may be
necessary to loosen the trims mounting during installation. Do not bring the device into contact with oil, paints or acids. Do not paint the door with the mortise
lock or
electronic device already mounted on the door. CLEANING THE ELECTRONIC DEVICE: a damp cloth with mild soapy water can be used. Never use abrasive soaps or sprays. For
best performance, stainless steel should be cleaned regularly. Note that when the door is closed without the lock having been already programmed, the lock will automatically lock and can only be
openedwithaPortableProgramingDevice(PPD).Ifyouhavequestionsordoubtsonthis,pleasecontactyourauthorizedSALTOsupplier.
LEGAL WARNINGS
The user shall be responsible for the correct use and maintenance of the access control equipment according to the instructions herein. SALTO shall not be responsible for any defect,
malfunction, loss or damage, whether direct or indirect, caused by or arisen from any improper installation or utilization of the equipment or which contravenes, transgresses or infringes in
any manner the abovementioned instructions.
SALTO’s liailit oeig the euipet is liited to the aanty provided. The warranty does not cover product failures due to repairs, modifications or product manipulations performed
in the access control equipment or in the inner electromechanical structure by anyone other than authorized SALTO dealers or personnel.
FCC COMPLIANCE STATEMENT
This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) this device may not cause harmful interference, and (2) this device must
accept any
interference received, including interference that may causeundesired operation. Changes or modifications not expressly approved by the party responsible for compliance
could void the user’s authority to operate the equipment.
Note: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide
reasonable protection against harmful interference in a residential installation. This equipment generates, uses, and can radiate radio frequency energy and, if not installed and used
in accordance with the instructions may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular
installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged
to try to correct the interference by one or more of the following measures:
• Reorient or relocate the receiving antenna.
• Increase the separation between the equipment and receiver.
• Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
• Consult the dealer or an experienced radio/TV technician for help.
CANADIAN COMPLIANCE STATEMENT
This device complies with Industry Canada license-exempt RSS standard(s). Operation is subject to the following two conditions: (1) this device may not cause harmful
interference, and (2) this device must accept any interference received, including interference that may cause undesired operation. Changes or modifications not expressly
appoed  the pat esposile fo opliae ould oid the use’s authoit to opeate the euipet.
Le présent appaeil est ofoe au CNR d’Idustie Caada appliales au appaeils adio eepts de liee. L’eploitatio est autoisée aux deux conditions suivantes:
 l’appaeil e doit pas poduie de ouillage, et  l’utilisateu de l’appaeil doit aepte tout ouillage adioletiue sui, e si le ouillage est suseptile d’e
compromettre le fonctionnement.
This device has been tested and found to comply with the limits for a Class B digital device, pursuant to ICES-003.