Sauder 415465 User manual

Need help? Visit Sauder.com to view video assembly tips or chat with a live rep.
Prefer the phone? Call 1-800-523-3987.
Share your journey!
sauder.com
NOTE: THIS INSTRUCTION
BOOKLET CONTAINS IMPORTANT
SAFETY INFORMATION.
PLEASE READ AND KEEP FOR
FUTURE REFERENCE.
Enlish p 1-18
Français p 19-20
Español p 21-22
Lot # 372912 05/21/15
Purchased: __________________
Be sure to ive us a rin before
makin any returns. 1-800-523-3987
Twin Platform Bed
Beinnins Collection | 415465
You won't just fall in
love with it. You'll fall
asleep in it.

Table of Contents Assembly Tools Required
Hammer
Not actual size
No. 2 Phillips Screwdriver
Tip Shown Actual Size
Skip the power trip.
This time.
2-3
4
5-18
19-20
21-22
23
Part Identification
Hardware Identification
Assembly Steps
Français
Español
Warranty
415465 www.sauder.com/servicesPae 2
Part Identification Now you know
our ABCs.
åWhile not all parts are labeled, some of the parts will have a label or an inked letter on the ede
to help distinuish similar parts from each other. Use this part identification to help identify similar parts.
A2 HEADBOARD (1)
B2 FOOTBOARD (1)
C PLATFORM (3)
D2 LEG (6)
E2 DRAWER FRONT (2)
F LARGE SUPPORT (2)
G DRAWER BRACE (4)
J2 RAIL (4)
K2 SUPPORT (6)
L SMALL SUPPORT (4)
D16 RIGHT DRAWER SIDE (2)
D17 LEFT DRAWER SIDE (2)
D219 DRAWER BACK (2)
D987 DRAWER BOTTOM (2)

Part Identification
415465www.sauder.com/services Pae 3
A2
B2
C
D2
E2
F
G
J2
K2
L
F
C
C
J2
J2
J2
K2
K2
K2
K2
K2
L
L
L
D2
D2
D2
D2
D2
E2
G
G
G
D16
D17
D16
D17
D987
D219
D219
D987

Hardware Identification
åScrews are shown actual size. You may receive extra hardware with your unit.
415465 www.sauder.com/servicesPae 4
BLACK 1-15/16" FLAT HEAD SCREW - 16
113S
SILVER 1-1/8" FLAT HEAD SCREW - 80
10S
BROWN 1-1/2" FLAT HEAD SCREW - 8
14S
WASHER - 16
10I PULL - 4 45K
HIDDEN CAM - 4
1F CAM SCREW - 4 8F
BLACK 9/16" LARGE HEAD SCREW - 4
1S
METAL BRACKET - 2
4G
BLACK 9/16" PAN HEAD SCREW - 16
25S
11M SWIVEL ROLLER - 8
SILVER 7/8" MACHINE SCREW - 8
24S
30S BLACK 1-9/16" FLAT HEAD SCREW - 12

Step 1 Look for this icon. It means a
video assembly tip is available at
www.sauder.com/services/tips
å Assemble your unit on a carpeted floor or on the empty
carton to avoid scratchin your unit or the floor.
å Push four HIDDEN CAMS (1F) into the DRAWER BRACES (G).
å Turn four CAM SCREWS (8F) into the DRAWER FRONTS (E2).
415465www.sauder.com/services Pae 5
Scan this QR code or go to this address:
http://qr.sauder.com/?ID=1145
to watch a video on how to assemble your unit.
G
G
G
G
E2
E2
8F
Arrow
The arrow in the HIDDEN
CAM must point toward the
hole in the ede of the board.
Hole
Arrow
1F

å Fasten the RAILS (J2) to the LEGS (D2). Use twenty-four
SILVER 1-1/8" FLAT HEAD SCREWS (10S) throuh the
larer holes in the RAILS (J2).
Step 2
415465 www.sauder.com/servicesPae 6
J2
J2
D2
D2
D2
J2
J2
D2
D2
D2
Remember:
Rihty tihty.
Lefty loosey.
SILVER 1-1/8" FLAT HEAD SCREW
(24 used in this step)
10S
Unfinished surface
Unfinished surface
Unfinished surface Unfinished surface
Larer holes
Surface
with holes
Surface
with holes
Surface
with holes
Short
unfinished
ede
Short
unfinished
ede
Short
unfinished
ede
Short
fi n i s h e d
ede
Surface
with holes
Surface
with holes
Surface
with holes
Larer holes
Larer holes
Larer holes
Larer holes

å Fasten the SMALL SUPPORTS (L) to the RAILS (J2). Use
sixteen SILVER 1-1/8" FLAT HEAD SCREWS (10S).
Step 3
415465www.sauder.com/services Pae 7
J2
L
J2
J2
J2
L
L
L
SILVER 1-1/8" FLAT HEAD SCREW
(16 used in this step)
10S
This hole must be here.
This hole must be here.
This hole must be here.
This hole must be here.

å Fasten the SUPPORTS (K2) to the HEADBOARD (A2)
and FOOTBOARD (B2). Use sixteen SILVER 1-1/8" FLAT
HEAD SCREWS (10S).
Step 4
415465 www.sauder.com/servicesPae 8
A2
B2
K2
K2
Unfinished surface
SILVER 1-1/8" FLAT HEAD SCREW
(16 used in this step)
10S
Lon finished ede
Ede with holes
Ede with holes
Unfinished
surface

å Fasten the SUPPORTS (K2) to the LARGE SUPPORTS (F).
Use eiht SILVER 1-1/8" FLAT HEAD SCREWS (10S).
Step 5
415465www.sauder.com/services Pae 9
F
F
K2
K2
SILVER 1-1/8" FLAT HEAD SCREW
(8 used in this step)
10S
Ede with holes
Ede with holes

å Fasten the remainin two SUPPORTS (K2) to the
SUPPORTS (K2). Use eiht BLACK 1-15/16" FLAT HEAD
SCREWS (113S).
Step 6
415465 www.sauder.com/servicesPae 10
K2
K2
K2
K2
F
F
BLACK 1-15/16" FLAT HEAD SCREW
(8 used in this step)
113S
Ede with holes
Ede with holes
Don't worry. It isn't
Rome. This can be built
in a day.