Sauder 418213 User manual

Need help? Visit Sauder.com to view video assembly tips or chat with a live rep.
Prefer the phone? Call 1-800-523-3987.
Share your journey!
sauder.com
NOTE: THIS INSTRUCTION
BOOKLET CONTAINS IMPORTANT
SAFETY INFORMATION.
PLEASE READ AND KEEP FOR
FUTURE REFERENCE.
Enlish p 1-19
Français p 20-22
Español p 23-25
Lot # 369246 03/18/15
Purchased: __________________
Be sure to ive us a rin before
makin any returns. 1-800-523-3987
You could totally write
a novel on this.
Writin Desk
County Line Collection | 418213

Table of Contents Assembly Tools Required
Part Identification
Hardware Identification
Assembly Steps
Français
Español
Safety
Warranty
Hammer
Not actual size
No. 2 Phillips Screwdriver
Tip Shown Actual Size
Skip the power trip.
This time.
3
4
5-19
20-22
23-25
26
27
418213 www.sauder.com/servicesPae 2

Part Identification
åWhile not all parts are labeled, some of the parts will have a label or an inked letter on the ede
to help distinuish similar parts from each other. Use this part identification to help identify similar parts.
Now you know
our ABCs.
A RIGHT END (1)
B LEFT END (1)
B32 SMALL DRAWER BOTTOM (1)
B33 LARGE DRAWER BOTTOM (1)
C UPRIGHT (1)
D TOP (1)
D266 DRAWER RIGHT SIDE (2)
D267 DRAWER LEFT SIDE (2)
D440 SMALL DRAWER BACK (1)
D441 SMALL DRAWER BOX FRONT (1)
D478 LARGE DRAWER BOX FRONT (1)
D479 LARGE DRAWER BACK (1)
E BACK (1)
F BRACE (1)
G RIGHT FRONT LEG (1)
H LEFT FRONT LEG (1)
I RIGHT REAR LEG (1)
J LEFT REAR LEG (1)
K STRETCHER (1)
L RIGHT SKIRT (1)
M LEFT SKIRT (1)
N LARGE DRAWER FRONT (1)
O SMALL DRAWER FRONT (1)
P DRAWER BRACE (1)
A
B
C
D
E
F
G
H
I
JK
L
M
N
O
D266
D266
D267
D267
D440
D441
D478
D479
B33
B32
P
418213www.sauder.com/services Pae 3

Hardware Identification
åScrews are shown actual size. You may receive extra hardware with your unit.
BLACK 7/8" LARGE HEAD SCREW - 4
17S
BLACK 1-7/8" FLAT HEAD SCREW - 1
2S
CAM COVER - 4
13P
3S GOLD 5/16" FLAT HEAD SCREW - 16
CAM SCREW - 20
8F WOOD DOWEL - 18
15F
HIDDEN CAM - 20
1F
SILVER 1-1/2" MACHINE SCREW - 2
95S BLACK 2-3/8" FLAT HEAD BOLT - 2 103S
CROSS SLOTTED DOWEL - 2
24F
KNOB - 2
69K GLUE - 1 54M
30S BLACK 1-9/16" FLAT HEAD SCREW - 10
40CA CABINET RIGHT - 2 40CB CABINET LEFT - 2 40CC DRAWER RIGHT - 2 40CD DRAWER LEFT - 2
418213 www.sauder.com/servicesPae 4

Step 1 Look for this icon. It means a
video assembly tip is available at
www.sauder.com/services/tips
å Assemble your unit on a carpeted floor or on the empty
carton to avoid scratchin your unit or the floor.
å Push twenty HIDDEN CAMS (1F) into the ENDS (A and B)
UPRIGHT (C), BACK (E), BRACE (F), and SKIRTS (L and M).
418213www.sauder.com/services Pae 5
Arrow
Arrow
1F
Arrow
1F
The arrow in the HIDDEN
CAM must point toward the
hole in the ede of the board.
Hole
(20used)
Arrow
1F
A
B
C
E
F
L
M

å Turn twenty CAM SCREWS (8F) into the ENDS (A and B),
TOP (D), BACK (E), and LEGS (G, H, I, and J).
Step 2
418213 www.sauder.com/servicesPae 6
A
B
E
G
H
I
J
8F
8F
D
8F
(20 used)

Step 3
418213www.sauder.com/services Pae 7
A
B
å Fasten the CABINET RIGHT (40CA) to the RIGHT END (A)
and CABINET LEFT (40CB) to the LEFT END (B). Use four
GOLD 5/16" FLAT HEAD SCREWS (3S) throuh holes #1
and #3.
GOLD 5/16" FLAT HEAD SCREW
(4 used in this step)
3S
1
2
3
4
1
2
3
4
Roller end
Roller end
This CAM SCREW is
near the roller end.
This CAM SCREW is
near the roller end.
Surface with HIDDEN CAMS
Surface with HIDDEN CAMS
Remember:
Rihty tihty.
Lefty loosey.

Step 4
418213 www.sauder.com/servicesPae 8
Fill the holes 1/4 to 1/2
full with GLUE.
Inspect the parts thorouhly before
assemblin. Disassembly of lued
parts is extremely dicult.
Caution
!
54M
15F
15F
å First, fill the holes in the RIGHT FRONT LEG (G) 1/4 to 1/2 full
with GLUE (54M). Then, insert the WOOD DOWELS (15F) into
the holes. Wipe away the excess GLUE.
å Now, fill the holes in the RIGHT END (A) and RIGHT SKIRT (L),
1/4 to 1/2 full with GLUE. Then, insert the WOOD DOWELS in
the LEG into these holes. Tihten the HIDDEN CAMS in the
RIGHT END and RIGHT SKIRT. Wipe away the excess GLUE.
å Repeat this step luin and fastenin the LEFT FRONT
LEG (H) to the LEFT END (B) and LEFT SKIRT (M) as
shown in the lower diaram.
A
B
L
M
Surface with HIDDEN CAMS
Surface with HIDDEN CAMS
G
H
1
2
Roller end
Roller end

Step 5
418213www.sauder.com/services Pae 9
Fill the holes 1/4 to 1/2
full with GLUE.
15F
15F
å First, fill the holes in the RIGHT REAR LEG (I) 1/4 to 1/2 full
with GLUE (54M). Then, insert the WOOD DOWELS (15F)
into the holes. Wipe away the excess GLUE.
å Now, fill the holes in the RIGHT END (A) and RIGHT SKIRT (L),
1/4 to 1/2 full with GLUE. Then, insert the WOOD DOWELS in
the LEG into these holes. Tihten the HIDDEN CAMS in the
RIGHT END and RIGHT SKIRT. Wipe away the excess GLUE.
å Repeat this step luin and fastenin the LEFT REAR
LEG (J) to the LEFT END (B) and LEFT SKIRT (M) as
shown in the lower diaram.
A
B
L
M
1
2
I
J
These holes must be here.
54M

Step 6
418213 www.sauder.com/servicesPae 10
Fill the holes 1/4 to 1/2
full with GLUE.
å Fill the holes in the LEGS (G, H, I, and J), SKIRTS (L and M)
and TOP (D), 1/4 to 1/2 full with GLUE (54M). Then, insert
the WOOD DOWELS (15F) into the holes as shown. Wipe
away the excess GLUE.
15F
15F
15F
Do not lue this hole.
Do not lue this hole.
54M
D
G
H
I
J
M
L