Sauder 422893 User manual

sauder.com
Dresser
Model 422893
NOTE: THIS INSTRUCTION
BOOKLET CONTAINS IMPORTANT
SAFETY INFORMATION.
PLEASE READ AND KEEP FOR
FUTURE REFERENCE.
Enlish p 1-28
Français p 29-32
Español p 33-36
Lot # 530655 06/19/19
Purchased: __________________
sauder.com
CONTACT US FIRST
BEFORE MAKING ANY RETURNS TO THE STORE.
Share your journey!
sauder.com
CONTACT US FIRST
BEFORE MAKING ANY RETURNS TO THE STORE.
Visit sauder.com/service to order replacement parts, view video assembly tips, or chat with a live rep.
Prefer the phone? Give us a rin at 1-800-523-3987.
Customer Service is available Monday-Friday - 9 a.m. to 5:30 p.m. EST (except holidays)
WARNING
CHOKING HAZARD - Small Parts
Not for children under 3 years.
Adult assembly required.

Table of Contents Assembly Tools Required
3
4-5
6-28
29-32
33-36
37-38
39
Part Identification
Hardware Identification
Assembly Steps
Français
Español
Safety
Warranty
Hammer
Not actual size
No. 2 Phillips Screwdriver
Tip Shown Actual Size
Skip the power trip.
This time.
422893 www.sauder.com/servicePae 2

Part Identification
åWhile not all parts are labeled, some of the parts will have a label or an inked letter on the ede
to help distinuish similar parts from each other. Use this part identification to help identify similar parts.
A END (2)
B RIGHT FRONT/LEFT REAR LEG (2)
C LEFT FRONT/RIGHT REAR LEG (2)
D CENTER LEG (1)
D68 DRAWER BACK (6)
D132 RIGHT DRAWER SIDE (6)
D138 LEFT DRAWER SIDE (6) - 1 with label
D730 DRAWER BOTTOM (6)
E UPRIGHT (1)
F BOTTOM (1)
G SKIRT (2)
H TOP (1)
J RIGHT DRAWER FRONT (3)
K LEFT DRAWER FRONT (3)
L BACK (1)
M65
DRAWER BRACE (6)
(Hidden part usin recycled
material. Color may vary.)
Now you know
our ABCs.
422893www.sauder.com/service Pae 3
A
B
CD
E
FG
H
J
K
L
M65
D132
D68
D138
D730
B
C
G
M65
D132
D68
D138
D730
A

Hardware Identification
åYou may receive extra hardware with your unit.
PULL - 6
149K
10A SLIDE CAM - 12 HIDDEN CAM - 33 1F CAM SCREW - 22 8F
WOOD DOWEL - 5
15F METAL BRACKET - 4 4G 19G LARGE METAL BRACKET - 1
FELT DISC CARD - 2
1M GLUE - 1
54M
BROWN PLASTIC
WASHER - 12
151M
422893 www.sauder.com/servicePae 4
40DA UNIVERSAL CABINET RAIL - 12 40DC DRAWER RIGHT - 6 40DD DRAWER LEFT - 6
NAIL - 44
1N
CAM DOWEL - 11
2F
FURNITURE TIPPING
RESTRAINT KIT - 1
97

Hardware Identification
åScrews are shown actual size. You may receive extra hardware with your unit.
422893www.sauder.com/service Pae 5
BLACK 9/16" LARGE HEAD SCREW - 10
1S 3S GOLD 5/16" FLAT HEAD SCREW - 48
30S BLACK 1-9/16" FLAT HEAD SCREW - 30 SILVER 1/4" MACHINE SCREW - 12 61S
BLACK 1-15/16" FLAT HEAD SCREW - 3
113S

Step 1 Look for this icon. It means a
video assembly tip is available at
www.sauder.com/service/tips
å Assemble your unit on a carpeted floor or on the empty
carton to avoid scratchin your unit or the floor.
å To bein assembly, push eleven HIDDEN CAMS (1F) into
the ENDS (A), UPRIGHT (E), and BOTTOM (F). Then,
insert the metal end of a CAM DOWEL (2F) into each
HIDDEN CAM.
422893 www.sauder.com/servicePae 6
A
A
E
F
Insert the metal end of the CAM
DOWEL into the HIDDEN CAM.
Arrow
Arrow
1F
2F
(11 used)
Do not tihten the HIDDEN CAMS in this step.

å Push twenty-two HIDDEN CAMS (1F) into the ENDS (A),
SKIRTS (G), and DRAWER BRACES (M65).
Step 2
422893www.sauder.com/service Pae 7
Arrow
1F
Arrow
1F
The arrow in the HIDDEN
CAM must point toward the
hole in the ede of the board.
Hole
1F
Arrow
1F
Arrow
(22 used)
Arrow
A
G
M65
G
M65
A
M65
M65
M65
M65
Some assembly
(and snacks) required.

Step 3
å Turn twenty-two CAM SCREWS (8F) into the LEGS (B, C,
and D) and DRAWER FRONTS (J and K).
å NOTE: Be sure to use the exact holes shown.
422893 www.sauder.com/servicePae 8
8F
B
C
D
J
K
B
C
J
K
J
K
8F
(22 used)
8F
Do not use these holes.

åFirst, fill the holes in two of the LEGS (B and C) 1/4 to 1/2 full
with GLUE (54M). Then, insert the WOOD DOWELS (15F)
into the holes. Wipe away the excess GLUE.
åNow, fill the holes in one of the ENDS (A) 1/4 to 1/2 full with
GLUE. Then, insert the WOOD DOWELS in the LEGS into
these holes. Wipe away the excess GLUE.
åFasten the two LEGS (B and C) to this END (A). Tihten six
HIDDEN CAMS.
Step 4
422893www.sauder.com/service Pae 9
Fill the holes 1/4 to 1/2 full with GLUE.
Inspect the parts thorouhly before
assemblin. Disassembly of lued
parts is extremely dicult.
Caution
!
54M
15F A
Surface with
HIDDEN CAMS
Ede with
CAM DOWELS
B
C
1
2
These surfaces
should be even.
This END (A) will
be the left END.
15F
The LEGS
will overhan
this ede.
This CAM SCREW
must be here.
This hole must be here.

Step 5
422893 www.sauder.com/servicePae 10
Fill the holes 1/4 to 1/2 full with GLUE.
Inspect the parts thorouhly before
assemblin. Disassembly of lued
parts is extremely dicult.
Caution
!
This END (A) will
be the riht END.
åFirst, fill the holes in the remainin two LEGS (B and C)
1/4 to 1/2 full with GLUE (54M). Then, insert the WOOD
DOWELS (15F) into the holes. Wipe away the excess GLUE.
åNow, fill the holes in the remainin END (A) 1/4 to 1/2 full
with GLUE. Then, insert the WOOD DOWELS in the LEGS
into these holes. Wipe away the excess GLUE.
åFasten the LEGS (B and C) to the remainin END (A).
Tihten six HIDDEN CAMS.
A
Surface with
HIDDEN CAMS
C
B
These surfaces
should be even.
15F
15F
The LEGS
will overhan
this ede.
This CAM SCREW
must be here.
This hole must be here.
54M
Ede with
CAM DOWELS

StepStep 6
A
C
A
B
VIEW THE DRAWER GLIDE VIDEO
å Fasten six UNIVERSAL CABINET RAILS* (40DA) to
the ENDS (A). Use twelve GOLD 5/16" FLAT HEAD
SCREWS (3S) throuh holes #1 and #4.
å *patent pendin lide system
GOLD 5/16" FLAT HEAD SCREW
(12 used in this step)
3S
3
2
1
1
2
3
4
4
Glide end
3
2
1
4
3
2
1
4
Surface with
HIDDEN CAMS
Surface with
HIDDEN CAMS
1
2
3
4
1
2
3
4
Glide end
422893www.sauder.com/service Pae 11
This CAM SCREW
must be here.
This CAM SCREW
must be here.

Step
å Fasten six UNIVERSAL CABINET RAILS* (40DA) to
the UPRIGHT (E). Use twelve GOLD 5/16" FLAT HEAD
SCREWS (3S) throuh holes #1 and #4.
å *patent pendin lide system
Step 7
GOLD 5/16" FLAT HEAD SCREW
(12 used in this step)
3S
VIEW THE DRAWER GLIDE VIDEO
Glide end
Surface with
HIDDEN CAMS
E
3
2
1
4
3
2
1
4
3
2
1
4
3
2
1
4
1
1
422893 www.sauder.com/servicePae 12
Ede with
CAM DOWELS

StepStep 8
åFirst, fill the hole in the end of the CENTER LEG (D) 1/4 to 1/2
full with GLUE (54M). Then, insert the WOOD DOWEL (15F)
into the hole. Wipe away the excess GLUE.
åFasten the LARGE METAL BRACKET (19G) to the CENTER
LEG (D). Use one BLACK 9/16" LARGE HEAD SCREW (1S) in
the exact hole shown.
åNOTE: Position the BRACKET exactly as shown.
Fill the holes 1/4 to 1/2 full with GLUE.
Inspect the parts thorouhly before
assemblin. Disassembly of lued
parts is extremely dicult.
Caution
!
15F
19G
BLACK 9/16" LARGE HEAD SCREW
(1 used for the BRACKET)
1S
D
54M
422893www.sauder.com/service Pae 13

Step
åFirst, fill the hole in the BOTTOM (F) 1/4 to 1/2 full with
GLUE (54M). Then, insert the WOOD DOWEL (15F) in the
CENTER LEG into the hole. Wipe away the excess GLUE.
åFasten the CENTER LEG (D) to the BOTTOM (F). Use one
BLACK 9/16" LARGE HEAD SCREW (1S) throuh the
BRACKET on the CENTER LEG and into the hole in
the BOTTOM.
Step 9
54M
F
BLACK 9/16" LARGE HEAD SCREW
(1 used for the BRACKET)
1S
D
Fill the holes 1/4 to 1/2 full with GLUE.
Inspect the parts thorouhly before
assemblin. Disassembly of lued
parts is extremely dicult.
Caution
!
422893 www.sauder.com/servicePae 14
Surface with
HIDDEN CAMS

StepStep 10
å Fasten the METAL BRACKETS (4G) to the SKIRTS (G).
Use four BLACK 9/16" LARGE HEAD SCREWS (1S).
å NOTE: Be sure the BRACKETS are even with the edes of
the SKIRTS.
BLACK 9/16" LARGE HEAD SCREW
(4 used in this step)
1S
4G
G
G
422893www.sauder.com/service Pae 15

StepStep 11
å Fasten the SKIRTS (G) to the CENTER LEG (D). Tihten
two HIDDEN CAMS.
å Fasten the SKIRTS (G) to the BOTTOM (F). Use four
BLACK 9/16" LARGE HEAD SCREWS (1S) throuh the
METAL BRACKETS on the SKIRTS and into the holes in
the BOTTOM.
G
G
D
F
BLACK 9/16" LARGE HEAD SCREW
(4 used for BRACKETS)
1S
Surface with HIDDEN CAMS Surface with HIDDEN CAMS
Just think. The sooner
you do this, the sooner
you do somethin else.
422893 www.sauder.com/servicePae 16

StepStep 12
å Open the FURNITURE TIPPING RESTRAINT KIT (97) and
fasten the SAFETY STRAP to the TOP (H). Use the provided
BLACK 9/16" LARGE HEAD SCREW.
å NOTE: Position the SAFETY STRAP exactly as shown.
H
Surface with holes
Meet Part (H). This component has
been enineered to be lihter, stroner,
faster… well ok. Not technically faster.
But definitely makes for a sturdier
Dresser that’s easier to assemble and
friendlier to the environment.
422893www.sauder.com/service Pae 17
BLACK 9/16" LARGE HEAD SCREW
(1 used for the SAFETY STRAP)
97
Safety strap

Step
å Fasten the Left END (A) to the TOP (H). Tihten two
HIDDEN CAMS.
Step 13
A
H
C
The SAFETY STRAP
should be here.
Do not stand the unit upriht without the
BACK fastened. The unit may collapse.
Caution
422893 www.sauder.com/servicePae 18
Start Tighten
Arrow
Minimum
190 derees
Caution
Risk of damae or
injury. HIDDEN CAMS
must be completely
tihtened. HIDDEN
CAMS that are not
completely tihtened
may loosen, and parts
may separate. To
completely tihten:
Arrow
Maximum
210 derees

StepStep 14
å Fasten the UPRIGHT (E) to the TOP (H). Tihten three
HIDDEN CAMS.
E
H
422893www.sauder.com/service Pae 19
Arrow
Minimum
190 derees
Maximum
210 derees
Surface
with
HIDDEN
CAMS

Step
å Fasten the BOTTOM (F) to the left END (A). Tihten two
HIDDEN CAMS.
å Fasten the SKIRT (G) to the LEFT FRONT/RIGHT REAR
LEG (C). Tihten one HIDDEN CAM.
å Fasten the BOTTOM (F) to the UPRIGHT (E). Use three
BLACK 1-15/16" FLAT HEAD SCREWS (113S).
Step 15
E
F
A
G
C
BLACK 1-15/16" FLAT HEAD SCREW
(3 used for the UPRIGHT)
113S
422893 www.sauder.com/servicePae 20
Arrow
Minimum
190 derees
Maximum
210 derees
Surface with
HIDDEN CAMS