Sauder North Avenue 424933 User manual

Need help? Visit Sauder.com to view video assembly tips or chat with a live rep.
Prefer the phone? Call 1-800-445-1527.
Share your journey!
sauder.com
Desk with Hutch
North Avenue Collection | Model 424933
NOTE: THIS INSTRUCTION
BOOKLET CONTAINS IMPORTANT
SAFETY INFORMATION.
PLEASE READ AND KEEP FOR
FUTURE REFERENCE.
Enlish p 1-12
Français p 13-14
Español p 15-16
Lot #: 531282
Date Purchased: __________________
07/23/19
Be sure to ive us a rin before
makin any returns. 1-800-445-1527
The oriinal desktop.

Table of Contents Assembly Tools Required
Part Identification
Hardware Identification
Assembly Steps
Français
Español
Safety
Warranty
No. 2 Phillips Screwdriver
Tip Shown Actual Size
3
4
5-12
13-14
15-16
17-18
19
Skip the power trip.
This time.
Pae 2 www.sauder.com 424933

Part Identification
åWhile not all parts are labeled, some of the parts will have a label or an inked letter on the ede
to help distinuish similar parts from each other. Use this part identification to help identify similar parts.
Now you know
our ABCs.
A HUTCH BACK (1)
B HUTCH SHELF (1)
C TOP (1)
D SMALL SHELF (1)
E LARGE SHELF (1)
F HUTCH END (2)
G LEFT END (1)
H RIGHT END (1)
J TOP BRACE (2)
A
B
C
D
E
F
F
G
H
J
Pae 3www.sauder.com424933

Hardware Identification
åScrews are shown actual size. You may receive extra hardware with your unit.
THUMB SCREW - 9
1L-WRENCH - 1
2WOOD DOWEL -2
3
Pae 4 www.sauder.com 424933
4BLACK 178" HEX HEAD SCREW  4
BLACK 1/2" HEX HEAD SCREW - 2
7
BLACK 1-3/4" FLAT HEAD SCREW - 3
5
6BLACK 1-3/8" HEX HEAD SCREW - 2

Step 1
å Assemble your unit on a carpeted floor or on the empty
carton to avoid scratchin your unit or the floor.
å Slide the TOP BRACES (J) onto the posts on the
RIGHT END (H).
å Fasten the TOP BRACES (J) to the RIGHT END (H). Turn two
BLACK 1/2" HEX HEAD SCREWS (7) with the L-WRENCH (2).
Look for this icon. It means a
video assembly tip is available at
www.sauder.com/services/tips
2
H
H
These holes must be
closer to this ede.
J
J
Pae 5www.sauder.com424933
Some assembly
(and snacks) required.
BLACK 1/2" HEX HEAD SCREW
(2 used in this step)
7

å Fasten the TOP (C) to the TOP BRACES (J). Turn four
THUMB SCREWS (1) throuh the TOP BRACES and into
the holes in the TOP.
å Unfold the LEFT END (G) and fasten it to the TOP (C).
Turn a THUMB SCREW (1) throuh the hole in the LEFT
END and into the TOP.
Step 2
1(5 used)
These lare holes
must be here.
J
C
G
Pae 6 www.sauder.com 424933
J
J
Meet Part (C). This component has
been enineered to be lihter, stroner,
faster… well ok. Not technically faster.
But definitely makes for a sturdier
424933 that’s easier to assemble and
friendlier to the environment.

Step 3
å Fasten the LEFT END (G) to the TOP (C). Turn two BLACK
1-7/8" FLAT HEAD SCREWS (4) with the L-WRENCH (2).
2
C
G
Pae 7www.sauder.com424933
BLACK 1-7/8" HEX HEAD SCREW
(2 used in this step)
4

å Slide the SHELVES (D and E) throuh the openin in the
LEFT END (G) as shown.
å Fasten the SHELVES (D and E) to the cross bars on the
LEFT END (G). Turn four THUMB SCREWS (1) throuh the
crossbars and into the SHELVES.
Step 4
D
D
E
E
G
G
Pae 8 www.sauder.com 424933
Now miht be a
ood time to refresh
your drink.
1
These holes
must be here.
These holes
must be here.

Step 5
å Insert two WOOD DOWELS (3) into the holes in the ede
of the HUTCH BACK (A).
å Fasten the HUTCH BACK (A) to the HUTCH SHELF (B).
Use three BLACK 1-3/4" FLAT HEAD SCREWS (5).
3
A
B
Pae 9www.sauder.com424933
BLACK 1-3/4" FLAT HEAD SCREW
(3 used in this step)
5
Part (B). Another
sturdier, easier,
friendlier component!

Step 6
å Fasten the HUTCH ENDS (F) to the HUTCH BACK (A).
Turn two BLACK 1-7/8" FLAT HEAD SCREWS (4) with
the L-WRENCH (2).
F
F
This hole must be here.
This hole must be here.
2
Pae 10 www.sauder.com 424933
BLACK 1-7/8" HEX HEAD SCREW
(2 used in this step)
4
A
4