Sauder OfficeWorks AFFIRM 427442 User manual

sauder.com
NOTE: THIS INSTRUCTION
BOOKLET CONTAINS IMPORTANT
SAFETY INFORMATION.
PLEASE READ AND KEEP FOR
FUTURE REFERENCE.
sauder.com
CONTACT US FIRST
BEFORE MAKING ANY RETURNS TO THE STORE.
sauder.com
CONTACT US FIRST
BEFORE MAKING ANY RETURNS TO THE RETAILER.
Sauder.com
Share your journey!
AFFIRM COLLECTION
How can we help you? To reach our customer service, visit sauder.com/commercial-oce/service
to chat with a live rep or email us.
Prefer the phone? Give us a ring at
877-996-7539 .
Our award-winning team is available Monday-Friday - 8:30 a.m. to 5 p.m. EST (except holidays).
English pg 1-24
Français pg 25-28
Español pg 29-32
Lot # 566764 09/08/21
Purchased: __________________
Desk 72"x 24"
Noble Elm finish | Model 427442

Table of Contents Assembly Tools Required
Hammer
Not actual size
No. 2 Phillips Screwdriver
Tip Shown Actual Size
Part Identification
Hardware Identification
Optional Accessories
Hardware Usage Guide
Assembly Steps
Français
Español
Safety
Warranty
3
4
5
6
6-24
25-28
29-32
33-34
35
427442 www.sauder.com/commercial-oce/servicePage 2

Part Identification
åWhile not all parts are labeled, some of the parts will have a label or an inked letter on the edge
to help distinguish similar parts from each other. Use this part identification to help identify similar parts.
Now you know
our ABCs.
A RIGHT END (1)
B LEFT END (1)
C SMALL END (1)
D MODESTY PANEL (1)
E TOP (1)
A
B
C
D
E
427442www.sauder.com/commercial-oce/service Page 3

Hardware Identification
åScrews are shown actual size. You may receive extra hardware with your unit.
1S BLACK 9/16" LARGE HEAD SCREW - 20
41G PLATE - 2LEVELER - 6
46E WOOD DOWEL - 13 42F
TOUCH-UP PEN - 1
10M GROMMET - 2 2P GROMMET CAP- 2 3P85G SUPPORT BRACKET - 2
CORD CLIP - 4
9P TWIST-LOCK®
FASTENER COVER - 17
124P
HOLE PLUG - 8
26P
427442 www.sauder.com/commercial-oce/servicePage 4

Optional Accessories (sold separately)
å This piece of furniture accommodates one or more of the following optional accessories (sold separately).
å Powered Grommet (Item 427829)
The Powered Grommet is designed to replace any existing grommet provided with your furniture.
å To purchase the Powered Grommet, scan this QR code. (Or go to sauder.com)
å Articulating Keyboard Shelf (Item 426468)
The Articulating Keyboard Shelf is designed to be fastened to the underside of your desk, desk return, or credenza top.
å To purchase the Articulating Keyboard Shelf, scan this QR code. (Or go to sauder.com)
å LED Light (Item 426494)
The LED Light is designed to be fastened to the underside of a hutch.
å To purchase the LED Light, scan this QR code. (Or go to sauder.com)
427442www.sauder.com/commercial-oce/service Page 5

Step 1
å Assemble your unit on a carpeted floor or on the empty
carton to avoid scratching your unit or the floor.
å Insert four WOOD DOWELS (42F) into the exact holes
shown in the MODESTY PANEL (D).
å NOTE: You may need to gently tap the WOOD DOWELS
in with your hammer.
42F
42F
D
1. Insert the dowel end of the FASTENER
into the hole of the adjoining part.
NOTE: The dowel end of the FASTENER
must remain fully inserted in the hole of the
adjoining part while locking the FASTENER.
2. Tighten the FASTENER with a Phillips
screwdriver as tight as possible.
Dowel end
2.
Push a TWIST-LOCK® FASTENER
into the large hole in the part.
1.
HOW TO USE A TWIST-LOCK®FASTENER
Hardware Usage Guide
Look for this icon. It means a video assembly tip is
available at www.sauder.com/service/tips
Find the numbered video or scan the QR code. 0
427442 www.sauder.com/commercial-oce/servicePage 6

Step 2
å If you purchased the 427439 to fasten to this desk 427442, then follow Steps 3-7. Next, go to the 427439 assembly and attachment.
å If you purchased the 427471 or the 427444 to fasten to this desk 427442 on the left, then follow Steps 8-13.
å If you purchased the 427471 or the 427444 to fasten to this desk 427442 on the right, then follow Steps 14-19.
427442
427471
427442
427471
427442
427444
427442
427444
427442
427439
427442
427439
CONNECTING 427439 - FOLLOW STEPS 3-7
CONNECTING 427442 ON LEFT - FOLLOW STEPS 14-19
CONNECTING 427442 ON RIGHT - FOLLOW STEPS 8-13
427442www.sauder.com/commercial-oce/service Page 7

Step 3
å Fasten the ENDS (A and B) to the MODESTY PANEL (D).
Tighten six TWIST-LOCK® FASTENERS.
å NOTE: Be sure the WOOD DOWELS in the MODESTY PANEL
insert into the ENDS.
å NOTE: You will not use the SMALL END (C) in Steps 3-7. Extra
hardware has been provided for the SMALL END if needed.
Surface with
TWIST-LOCK®
FASTENERS
D
A
B
2
Remember:
Righty tighty.
Lefty loosey.
Surface with
TWIST-LOCK®
FASTENERS
Surface without
TWIST-LOCK®
FASTENERS
Long edge with
TWIST-LOCK®
FASTENERS
427442 www.sauder.com/commercial-oce/servicePage 8

Step 4
å Insert seven WOOD DOWELS (42F) into the exact holes
shown in the TOP (E).
å NOTE: You may need to gently tap the WOOD DOWELS in
with your hammer.
å With the help of another person, fasten the ENDS (A and B)
and MODESTY PANEL (D) to the TOP (E). Tighten nine
TWIST-LOCK® FASTENERS.
å NOTE: Be sure the WOOD DOWELS in the TOP insert into the
ENDS and MODESTY PANEL.
D
A
E
B
Caution
Two person
lift required
2
42F
427442www.sauder.com/commercial-oce/service Page 9

Step 5
å Fasten the SUPPORT BRACKETS (85G) to the MODESTY
PANEL (D) and TOP (E). Use twelve BLACK 9/16" LARGE
HEAD SCREWS (1S).
å Push four CORD CLIPS (9P) into the TOP (E).
9P
BLACK 9/16" LARGE HEAD SCREW
(12 used in this step)
1S
D
E
85G
85G
427442 www.sauder.com/commercial-oce/servicePage 10