Sauder OfficeWorks AFFIRM 427444 User manual

sauder.com
NOTE: THIS INSTRUCTION
BOOKLET CONTAINS IMPORTANT
SAFETY INFORMATION.
PLEASE READ AND KEEP FOR
FUTURE REFERENCE.
sauder.com
CONTACT US FIRST
BEFORE MAKING ANY RETURNS TO THE STORE.
sauder.com
CONTACT US FIRST
BEFORE MAKING ANY RETURNS TO THE RETAILER.
Sauder.com
Share your journey!
AFFIRM COLLECTION
English pg 1-12
Français pg 13-14
Español pg 15-16
Lot # 566822 09/22/21
Purchased: __________________
Desk 72"x 30"
Noble Elm finish | Model 427444
How can we help you? To reach our customer service, visit sauder.com/commercial-oce/service
to chat with a live rep or email us.
Prefer the phone? Give us a ring at
877-996-7539 .
Our award-winning team is available Monday-Friday - 8:30 a.m. to 5 p.m. EST (except holidays).

Table of Contents Assembly Tools Required
Hammer
Not actual size
No. 2 Phillips Screwdriver
Tip Shown Actual Size
Hardware Identification
Part Identification
Optional Accessories
Hardware Usage Guide
Assembly Steps
Français
Español
Safety
Warranty
2
3
4
5
4-12
13-14
15-16
17-18
19
åYou may receive extra hardware with your unit.
LEVELER - 4
46E WOOD DOWEL - 11 42F TOUCH-UP PEN - 1
10M
HOLE PLUG - 8
26P
CORD CLIP - 2
9P
GROMMET - 2
2P GROMMET CAP- 2 3P
Hardware Identification
TWIST-LOCK®
FASTENER COVER - 17
124P
427444 www.sauder.com/commercial-oce/servicePage 2

Part Identification
åWhile not all parts are labeled, some of the parts will have a label or an inked letter on the edge
to help distinguish similar parts from each other. Use this part identification to help identify similar parts.
Now you know
our ABCs.
A RIGHT END (1)
B LEFT END (1)
C TOP (1)
D MODESTY PANEL (1)
A
B
C
D
427444www.sauder.com/commercial-oce/service Page 3

Optional Accessories (sold separately)
å This piece of furniture accommodates one or more of the following optional accessories (sold separately).
å Powered Grommet (Item 427829)
The Powered Grommet is designed to replace any existing grommet provided with your furniture.
å To purchase the Powered Grommet, scan this QR code. (Or go to sauder.com)
å Articulating Keyboard Shelf (Item 426468)
The Articulating Keyboard Shelf is designed to be fastened to the underside of your desk, desk return, or credenza top.
å To purchase the Articulating Keyboard Shelf, scan this QR code. (Or go to sauder.com)
å LED Light (Item 426494)
The LED Light is designed to be fastened to the underside of a hutch.
å To purchase the LED Light, scan this QR code. (Or go to sauder.com)
427444 www.sauder.com/commercial-oce/servicePage 4

Step 1
å Assemble your unit on a carpeted floor or on the empty
carton to avoid scratching your unit or the floor.
å Using your hammer, gently tap two LEVELERS (46E)
completely into the holes in the LEFT END (B).
å NOTE: Adjustments to the LEVELERS will be made later in
assembly once your unit is standing upright.
46E
B
1. Insert the dowel end of the FASTENER into the
hole of the adjoining part.
NOTE: The dowel end of the FASTENER must
remain fully inserted in the hole of the adjoining
part while locking the FASTENER.
2. Tighten the FASTENER with a Phillips
screwdriver as tight as possible.
Dowel end
2.
Push a TWIST-LOCK® FASTENER
into the large hole in the part.
1.
HOW TO USE A TWIST-LOCK®FASTENER
Hardware Usage Guide
Look for this icon. It means a video assembly tip is
available at www.sauder.com/service/tips
Find the numbered video or scan the QR code. 0
427444www.sauder.com/commercial-oce/service Page 5

Step 2
å Insert two WOOD DOWELS (42F) into the exact holes
shown in the LEFT END (B).
å NOTE: You may need to gently tap the WOOD DOWELS
in with your hammer.
å Fasten the LEFT END (B) to the MODESTY PANEL (D).
Tighten three TWIST-LOCK® FASTENERS.
å NOTE: Be sure the WOOD DOWELS in the LEFT END
insert into the MODESTY PANEL.
42F
B
D
For support, place packing
foam and magazines here.
Surface with
TWIST-LOCK®
FASTENERS
Surface with
TWIST-LOCK®
FASTENERS
2
Edge with TWIST-LOCK® FASTENERS
427444 www.sauder.com/commercial-oce/servicePage 6

Step 3
A
46E
å Using your hammer, gently tap the remaining
LEVELERS (46E) completely into the holes in the
RIGHT END (A).
å NOTE: Adjustments to the LEVELERS will be made later in
assembly once your unit is standing upright.
427444www.sauder.com/commercial-oce/service Page 7

Step 4
å Insert two WOOD DOWELS (42F) into the exact holes
shown in the RIGHT END (A).
å NOTE: You may need to gently tap the WOOD DOWEL in
with your hammer.
å Fasten the RIGHT END (A) to the MODESTY PANEL (D).
Tighten three TWIST-LOCK® FASTENERS.
å NOTE: Be sure the WOOD DOWELS in the RIGHT END
insert into the MODESTY PANEL.
A
D
Surface without
TWIST-LOCK®
FASTENERS
2
42F
427444 www.sauder.com/commercial-oce/servicePage 8

Step 5
C
å Insert seven WOOD DOWELS (42F) into the exact holes
shown in the TOP (C).
å NOTE: You may need to gently tap the WOOD DOWELS
in with your hammer.
å Push two CORD CLIPS (9P) into the TOP (C).
42F
42F
9P
Pilot hole to be used
only if you purchased
the optional
426468 Articulating
Keyboard Shelf.
427444www.sauder.com/commercial-oce/service Page 9

å Fasten the TOP (C) to the ENDS (A and B) and MODESTY
PANEL (D). Tighten eleven TWIST-LOCK® FASTENERS.
å NOTE: Be sure the WOOD DOWELS in the TOP insert
into the ENDS and MODESTY PANEL.
Step 6
A
B
D
C
2
427444 www.sauder.com/commercial-oce/servicePage 10