Schuchmann franka User manual

Instructions for use.
franka. The universal sub-frame.
franka.

Many thanks.
Dear Customer
At this point we would like to thank you for placing your trust in our company and
for purchasing our product. We ask you to read through the Instructions for use carefully
prior to initial commissioning of the product, and to observe them. Please note that gui-
delines and representations in these Instructions for use may deviate from your product
due to diering equipment. We reserve the right to make technical modifications.
Important information!
Ensure that these Instructions for use remain with the product.
Your schuchmann Team

03 Contents.
1. Preparation. ................................................................................ 04
1.1 Delivery............................................................................................................................04
1.2 Safety measures prior to use ..............................................................................04
1.3 Safe disposal...............................................................................................................04
1.3.1 Packaging...........................................................................................................04
1.3.2 Product................................................................................................................04
1.4 Where to store the Instructions for use..........................................................04
2. Product description. .................................................................... 05
2.1 Material information ................................................................................................05
2.2 Handling/transport................................................................................................05
2.3 Application areas, use according to the intended purpose .............05
2.3.1 Indications .........................................................................................................05
2.3.2 Contraindications .........................................................................................06
2.4 Use not in accordance with the intended purpose / warning gui-
delines............................................................................................................................06
2.5 Equipment for basic model.................................................................................06
2.6 List of accessories....................................................................................................06
2.7 Product overview......................................................................................................07
3. Settings. ..................................................................................... 08
3.1 Locking / unlocking the castors ........................................................................08
3.2 Seat height..................................................................................................................08
3.3 Hydraulic seat height adjustment...................................................................09
3.4 Electrical seat height adjustment...................................................................09
3.5 Seat angle....................................................................................................................10
3.6 Backrest angle adjustment..................................................................................10
3.7 Foot support ................................................................................................................10
4. Cleaning and servicing. ............................................................... 13
4.1 Cleaning and disinfecting..................................................................................... 13
4.1.1 Cleaning............................................................................................................... 13
4.1.2 Disinfection......................................................................................................... 13
4.2 Servicing........................................................................................................................ 13
4.3 Maintenance ............................................................................................................... 13
4.3.1 Maintenance specifications......................................................................14
4.3.2 Maintenance plan .........................................................................................14
4.4 Spare parts .................................................................................................................. 15
4.5 Duration of use and re-use ................................................................................. 15
5. Technical data. ............................................................................ 16
6. Guarantee. .................................................................................. 17
7. Identication. ............................................................................. 18
7.1 EU Declaration of Conformity............................................................................... 18
7.2 Serial number / date of manufacture............................................................. 19
7.3 Product version ........................................................................................................... 19
7.4 Issue of the document ............................................................................................ 19
7.5 Name and address of the manufacturer, specialist dealer
supplying the product............................................................................................. 19

04 1. Preparation.
1.1 Delivery
On receiving the product, please check it for completeness, lack of faults
and any transport damage. Inspect the goods in the presence of your
forwarder. Should transport damage have occurred, please arrange for
an inventory (determination of the faults) to be made in the presence of
the forwarder. Please send a complaint in writing to the specialist dealer
responsible.
1.2 Safety measures prior to use
The correct use of the product requires a detailed and careful instruction
of the user or the accompanying person. We ask you to read through the
Instructions for use carefully prior to initial commissioning of the product,
and to observe them. It is possible that product parts that get in contact
with the skin may heat up in the sun. Cover these areas or protect the de-
vice from direct sunlight.
1.3 Safe disposal
In order to preserve and protect the environment, to prevent environmental
pollution and to improve the recycling of raw materials, please note the
disposal instructions in points 1.3.1 and 1.3.2.
1.3.1 Packaging
The packaging of the product should be kept for any future transport that
might be required. Should you have to return the product for repairs or in
case of a guarantee claim, please if possible use the original box so that
the product is optimally packaged. Otherwise, separate the packaging
materials for recycling according to their classification.
Do not leave packaging materials unattended, as they are a possible source of
danger.
1.3.2 Product
Attheendoftheproductlifecycle,recycletherawmaterialsusedintheproduct
according to their nature (see material information under point 2.1).
1.4 Where to store the Instructions for use
Please store these Instructions for use carefully and ensure that these Inst-
ructions for use remain with the product in case of re-use. Should you lose
the instructions, you can always download an updated version at www.
schuchmann.de .

05 2. Product description.
2.1 Material information
The sub-frame is made of steel which is non-corroding and powder-co-
ated.
2.2 Handling / transport
The sub-frame is not designed to be carried, as it is fitted with castors.
Should you have to carry the equipment due to obstacles, ensure that all
moving parts are tightened. Then position yourself next to the sub-frame,
grip it on both sides under the support head and carry it to the required
location. To transport the sub-frame, reduce all adjustments to their most
compact size (fold up foot support, set lowest seat height etc.)
Tighten all moving parts prior to carrying!
2.3 Application areas, use according to the intended purpose
The franka. seat pan sub-frame is designed for indoor use and consists
of a rigid tubular frame with push bar or push handles. It has four small
castors that permit turning on the spot. At least two of the castors are
equipped with lock brakes.
The individually configured seat pans that match the sub-frame can be
attached to a corresponding mounting device. The height of the seat
pans can be adjusted using the seat pan sub-frame.
2.3.1 Indications
The franka. universal seat pan sub-frame is designed to accommodate a
seat pan for children and youths. The indication of the seat pan sub-fra-
me orients itself on the indication of a seat pan. There may be a medical
necessity for the prescription of seat units in case of:
• infantile cerebral palsy
• Myelodysplasia
• muscular dystrophy
• various disease patterns with scoliotic deformations of the spine

06 2. Product description.
2.3.2 Contraindications
In general, the indications for provision of a seat pan sub-frame in connec-
tion with a seat pan should be approved by a doctor or orthopedist. It
should therefore be clarified prior to procurement whether contraindica-
tions exist for the patient. In general, any type of pain represents a cont-
raindication.
2.4 Use not in accordance with the intended purpose / warning guide
lines
• Correct usage of the seat pan sub-frame requires precise and careful
training of the accompanying person.
• The product may not be used without supervision.
• The max. load (see Point 5) may not be exceeded.
• The seat pan and the push bar/push handle may not be used to carry
the product. Only carry it by fixed frame parts.
• Do not use franka. as shower chair.
• Always tighten the screws again after replacing parts.
• Do not use franka. with defective, worn or missing parts.
• Only use accessories and spare parts made by Schuchmann, otherwise
you will endanger the user.
• Only use the seat pan sub-frame if all components have been correctly
mounted and adjusted.
• Please read out the Instructions for use for users suering from a visual
or reading impairment, so that they can use the sub-frame safely.
2.5 Equipment for basic model
• Tilt adjustment of the seat pan via gas pressure spring 500 N
• Height adjustment via gas pressure spring 1200 N (800 N for size 0)
• Four castors 75mm, two with locking devices
• Incl. support head for trapezoidal and external adapter and
foot bench plug-in mechanism
2.6 List of accessories
• Push bar/handle
• Release lever
• Anti-tip mechanism
• Conversion kit for combination
sub-frame
• Electrical height adjustment
• Hydraulic height adjustment
• Foot support
• Additional gas dampers
• Support head for trapezoidal and
standard adapter
• Trapezoidal adapter (upper and
lower part)
• Tube adapter
• Central locking brake of the
rear castors
• Castors
• Wheel base extension

07 2. Product description.
2.7 Product overview
The Fig. below is intended to show you the designation of the most
important components as well as the terms which you will find in these
Instructions for use.
Release lever for
seat angle adjustment
Push bar
Front castor
Castor at rear with
locking device
Clamping lever for adjustment
of the push bar angle Trapezoidal adapter
Foot pedal for
height adjustment

08 3. Settings.
Settings and adjustments to the product or accessories may only be made
by people who have been given the necessary instructions by a medical
product advisor. Please ensure that none of the user's extremities are in
the respective area when making adjustments of any kind to minimise the
risk of injury.
3.1 Locking / unlocking the castors
The sub-frame should always be pre-
vented from rolling away inadvertently
by locking the 2 rear castors (A). To do
this, press the locking device (A) down
with your foot. To release the locking
device (A), push it upwards.
3.2 Seat height
The seat height is adjusted using a gas
pressure spring. In order to adjust the
seat height upwards, the foot pedal (B)
on the frame base is actuated. By
pressing it lightly, the seat unit slides
upwards. Lowering is achieved through
pressure from above onto the seat
whilst at the same time operating the
foot pedal. The gas pressure spring
serves merely to assist with adjust-
ment of the height. The foot pedal
can be secured against unintentional
operation with the spring pin (C) loca-
ted on the inside of the foot pedal. To
do this, turn the spring pin until it engages. If necessary, assist engagement
by moving the foot pedal gently. The locking eect is cancelled by pulling
out the spring pin and turning it a quarter turn.
A
BC

09 3. Settings.
3.3 Hydraulic seat height adjustment
The seat height of the franka. sub-fra-
me can optionally be adjusted in
height with hydraulic support. It is
operated with the foot. To move the
frame upwards, press gently enough
times on the pedal (A) until the seat
pan support has reached the requi-
red position. To lower it, place your
foot under the pedal (A) and press
upwards.
3.4 Electrical seat height adjustment
The seat height of the franka. Thanks
to the electrical support, the sub-fra-
me can be adjusted in height. This
is operated with the existing remo-
te operation (B). Press the arrow key
downwards in order to adjust the seat
height downwards and upwards in or-
der to adjust the seat height upwards.
Ensure that, during adjustment of the
seat height, no body parts (feet) are trap-
ped in the area of the adjustment mecha-
nism in order to avoid injuries.
In the event of problems with the control unit, please contact a specialist dealer
so that he can send it to our factory if needed. As soon as the housing is opened,
the Linak sticker (C) is damaged, following which the two-year warranty expires.
A
B
C

10 3. Settings.
3.5 Seat angle
In order to adjust the angle of the seat
pan, the hand trigger (A) on the seat
pan support is pulled upwards. The
seat pan can now be adjusted th-
rough the application of pressure into
an active or passive position.
Optionally, the release handle (B) for
the seat angle adjustment can also
be mounted on the push bar / handle
or on the back of the seat pan if used
later.
3.6 Backrest angle adjustment
The backrest angle can be adjusted
via an optional push bar (C) / push
handle (D). To do this, simply release
the clamping lever (E), bring the push
bar / push handle into the required
position and then pull the clamping
lever tight once more.
3.7 Foot support
For the franka. sub-frame there are
dierent foot support variants that
can be mounted to the support head.
Depending on the respective version,
these feature height, knee angle and
foot angle adjustment. To install, in-
sert the square tubes (F) into the ad-
apters provided (G), adjust the requi-
red depth and firmly tighten the grub
screws under the supports (G). Now
the knee angle can be adjusted using
the two clamping levers (H).
A
B
CD
H
G
H
F
E
E

11 3. Settings.
3.8 Adaptation of seat pans
franka. is prepared for the accommodation
of a seat unit / seat pan. The seat adapter
represents the connection point.
Seat pan adapter, standard:
Insertion of the seat adapter into the seat
pan support:
1. Insert the adapter into the rear tube of the
seat pan support.
2. Fold down the adapter until it meets the
front tube. The lock
will engage automatically.
3. When removing the seat pan, first undo the knurled knob on
the adapter and then release the connection between adapter
and seat pan support by pulling the button. Tilt the pan slightly and
remove it.
Seat pan adapter, trapezoidal shape:
Place the seat pan with the trapezoidal
shaped mounted adapter piece on the tra-
pezoidal shaped seat pan adapter plate
and push back. Here the patented closu-
re engages automatically. Now tighten the
knurled knob (A) of the patented closure.
When removing the seat pan, first untwist
the knurled knob (A), and then pull it down to
release the connection between the adapter
and seat pan support. The pan can now be
pulled away to the front.
3.9 Anti-tip mechanism
The anti-tip mechanism is adjustable in
height. To adjust the height, open the lever (B),
position the anti-tip mechanism to the requi-
red height and close the lever once more.
3.10 Wheel base extension
The wheel base extension serves to ensure
stability even for larger seating systems when
the seat is tilted backwards.
The wheel base extension cannot be adjusted!
A
B

12 3. Settings.
3.11 Handling the push handle / push bar
The push handle can be adjusted in height
and angle. In order to adjust the height, re-
lease both clamping levers (A), bring the push
handle into the required position and pull the
clamping lever tight once more. To adjust the
angle, please release both clamping levers (B),
bring the push handle into the desired angle
and pull. The angle of the push bar can be
adjusted by releasing the two levers (C).
Only use the push handle to push the sub-frame!
Do not hang objects onto the push handle! In-
creased risk of tipping!
3.12 Conversion kit for combination sub-frame
When converting franka. to a combination
sub-frame, the plastic castors are replaced
with 6“ pneumatic wheels with steering forks
and 12 ½“ pneumatic drum braked wheels.
The drum brakes work independent of air
pressure. They are integrated into the wheel
hubs and cannot be accessed. They provi-
de the companion to the user the possibility
of assisting with the braking action (in parti-
cular when driving down hills) and of locking
the sub-frame. This is conducted through the
two brake levers (D) which are mounted onto
the push handle. The drum brakes are set by
turning the setting screws in or out. They are
located at the lower end of the brake cables
in the brake saddle. Leave this work to your
specialist dealer in case of any uncertainty.
The conversion kit can only be used with a push
handle.
Handling the wheels on the combination
sub-frame
The following general rules apply:
• High air pressure: Low rolling resistance / less suspension comfort
• Low air pressure: Higher rolling resistance / more suspension comfort
A
A
B
C
C
B
D
D

13 4. Cleaning and servicing.
4.1 Cleaning and disinfecting
4.1.1 Cleaning
Please clean all frame elements regularly with a spon-
ge or damp cloth; making sure that water droplets are
removed. Please clean with a mild household deter-
gent for severer dirt. Thorough drying of the cleaned
areas is important.
All fabrics that cannot be removed can be wiped with
a moist cloth. For all removable fabrics please pay at-
tention to the sewn-in care labels (such as A+ B) on the
respective element.
Please also pay attention to our general clea-
ning and hygiene advice. This can be found at
www.schuchmann.de/mediathek.
4.1.2 Disinfection
Various products can be used for surface disinfection of metal and plastic
parts.
Liquid disinfectants are available as ready-to-use solutions that are spray-
ed on and evenly applied with a soft cloth. Alternatively, wipes pre-soaked
with disinfectant can be used to wipe the products over the entire surface.
In both cases, care must be taken to ensure complete wetting. Disinfection
in fully automatic disinfection systems is also possible and recommended.
The exposure times may vary and can be found in the manufacturer's ins-
tructions for the products used.
4.2 Servicing
Please carry out a visual inspection on a daily basis and regularly check
the product for cracks, breaks, missing parts and malfunctions. In case of a
defect or malfunction, please contact the specialist dealer who supplied
you with the product (see Point 7.5).
4.3 Maintenance
For reasons of user safety and to retain product liability, the product must
be subjected to maintenance by a specialist dealer at least once a year
(see Point 7.5). The maintenance work carried out must be documented in
the maintenance plan (see Point 4.3.2).
7190045
A
Obermaterial/
top cloth/dessus:
100% Polyester
B

14 4. Cleaning and maintaining.
4.3.1 Maintenance specications
• Basic cleaning according to the manufacturer's specifications
• Disinfect according to the manufacturer's specifications as required
• Damages to the frame, mounting parts and accessories (cracks, breaks,
corrosion, bent or missing parts)
• Strength of the connections (tighten loose screws, replace missing
screws)
• Functionality of the adjustment elements (screws, release lever, latching
elements, foot pedal)
• Functionality of other adjustment elements (push bar and footrests)
• Functionality of the gas pressure springs (if necessary readjustment of
the bowden cables)
• Functionality of the safety elements (anti-tilt)
• Functionality of brakes
• Functionality of the rollers (concentricity, smooth running)
• If needed, functionality check of the electrical height adjustment
including wiring
• Legibility of the type label
• Final complete functional check of the aid
• Check of the correct mounting of all attachment parts and accessories
4.3.2 Maintenance plan
Maintenance specifications of the manufacturer (see Point 4.3.1) were car-
ried out:
Date Company Name Signature
Any defects or damage found must be repaired by the specialist dealer or the
manufacturer before reuse.

15 4. Cleaning and maintaining.
4.4 Spare parts
Only use original accessories and original spare parts from the manufactu-
rer, otherwise you will endanger the user and the warranty becomes void.
Please contact the supplying specialist dealer to order spare parts stating
the serial number of the seat unit (see Point 7.5). Necessary spare parts and
accessories must only be installed by trained personnel.
4.5 Duration of use and re-use
The expected duration of use of our product, dependent on the usage
intensity and amount of re-use, totals up to "8" years, if the usage takes
place in accordance with the information in these Instructions for use. It
may be possible to use the product over and above this period of time
if it is in a safe condition. The expected duration of use does not refer to
wear parts such as covers, pads …… Schuchmann excludes the purchase
and sale of used child seats since they could have invisible damage which
could significantly reduce the safety of the child seat.

16 5. Technical data.
Dimensions
Size 0 Size 1 Size 2
AHeight of seat pan support 18 - 55 cm 18 - 55 cm 18 - 55 cm
Height of seat pan support with
electrical height adjustment 26 - 55 cm 26 - 55 cm 26 - 55 cm
Height of seat pan support with
hydraulic height adjustment 20 - 56 cm 20 - 56 cm 20 - 56 cm
Height of seat pan support with
combination sub-frame - 25 - 64 cm 25 - 64 cm
BLength of base frame 58 cm 61 cm 75 cm
Total length with combination
sub-frame 71 cm 76 cm 86 cm
CTotal width 52 cm 54 cm 64 cm
Total width with combination
sub-frame 62 cm 66 cm 76 cm
DFrame height 27 cm 27 cm 27 cm
ESeat angle (-) 5° - 35° (-) 5° - 35° (-) 5° - 35°
max. load 30 kg 50 kg 75 kg
Weight 8 kg 10 kg 12 kg
A
A
D
C
E
B

17 6. Guarantee.
The two-year statutory guarantee period shall apply for all products. This
begins with the delivery or handover of the goods. Should a verifiable ma-
terial or manufacturing fault occur within this time period, we shall, after
carriage paid return to us, view the indicated damage and, if applicable,
either repair or deliver a new product at our discretion.

18 7. Identication.
7.1 EU Declaration of Conformity
EU Konformitätserklärung
EU Declaration of Conformity
Firma / Company Schuchmann GmbH & Co. KG
Rudolf-Runge-Str. 3 · 49143 Bissendorf · Deutschland / Germany
Tel. [phone] / 40 71 00 · Fax [phone]
erklärt in alleiniger Verantwortung, dass das nachfolgend genannte Produkt der Risikoklasse 1
declares under our sole responsibility that the following product(s) of Class 1 Medical Devices
Datei: Konformitätserklärung franka Stand: Rev. 2.0 Seite: 1
„franka.“Fahrgestell für den Innenbereich / chassis for indoor use
Art.-Nr. / Item-No.: 21 00 000, 21 01 000, 21 02 000
Basis UDI-DI /
Basic UDI-DI: 4251040200004000210XXXX89
den einschlägigen Bestimmungen der im folgenden aufgeführten Richtlinien und Standards entspricht:
is / are in conformity with the requirements of the below listed directives and standards:
Verordnung (EU) 2017/745 über Medizinprodukte vom 05. April 2017
Regulation (EU) 2017/745 on medical devices of 5 April 2017
DIN EN 12182:2012 Technische Hilfen für behinderte Menschen
T
echnical aids for disabled persons
DIN EN ISO 14971:2013 Medizinprodukte - Anwendung des Risikomanagements auf Medizinprodukte
Medical devices - Application of risk management to medical devices
Diese Konformitätserklärung gilt nur für Produkte mit den oben genannten Artikelnummern und
ist gültig bis zum 31.12.2023.
This declaration of conformity applies only for products with above-named Item-numbers
and is valid until 31.12.2023.
Datum / Date: 01.04.2020
Unterschrift /
Sign:
Name /
Name: Torsten Schuchmann
Funktion /
Function: Sicherheitsbeauftragter für Medizinprodukte / Safety officer for medical devices

19 7. Identication.
7.2 Serial number / date of manufacture
The serial number, the date of manufacture and other information can be
found on the type plate, which is located on all of our products (A).
7.3 Product version
The franka. seat pan sub-frame is available in three sizes and can be com-
plemented with various accessories (see Point 2.6).
7.4 Issue of the document
Instructions for use franka. - Change status H; issue 09.2020
7.5 Name and address of the manufacturer, specialist dealer supplying
the product
This product was manufactured by:
This product has been delivered by the following specialist dealer:
Schuchmann GmbH & Co. KG
Rudolf-Runge-Str. 3 · 49143 Bissendorf · Germany
Phone [phone] / 40 71 00 · Fax [phone]
[e-mail] · www.schuchmann.de
A
Product name
Item number
Serial number
schuchmann.de • [e-mail] • Fon +49 (0) 5402 / 40 71 00
Rudolf-Runge-Str. 3 • 49143 Bissendorf • Germany
Barcode UDI-DI Barcode UDI-PI
UDI-DI
SN / UDI-PI
Type
Product
Max. load
Size
MD
Size
max. load
Date of manufacture
Product labelling in accordance with MDR

schuchmann.de GA 21 - EN_1.0