Schuchmann Momo motion User manual

Instructions for use.
momo motion. The tried-and-tested tricycle with E-drive.
momo motion.

Many thanks.
Dear Customer
At this point we would like to thank you for placing your trust in our company and
for purchasing our product. We ask you to read through the Instructions for use carefully
prior to initial commissioning of the product, and to observe them. Please note that gui-
delines and representations in these Instructions for use may deviate from your product
due to diering equipment. We reserve the right to make technical modifications.
Important information!
Ensure that these Instructions for use remain with the product.
Your schuchmann Team

2. Product description.
03 Contents.
1. Preparation. ................................................................................ 06
1.1 Delivery............................................................................................................................06
1.2 Safety measures prior to use ..............................................................................06
1.3 Safe disposal...............................................................................................................06
1.3.1 Packaging...........................................................................................................06
1.3.2 Product................................................................................................................06
1.4 Where to store the Instructions for use..........................................................06
2. Product description. .................................................................... 07
2.1 General information.................................................................................................07
2.2 Handling and transport........................................................................................ 07
2.3 Application areas, use according to the intended purpose .............07
2.3.1 Indications .........................................................................................................07
2.3.2 Contraindications .........................................................................................08
2.4 Use not in accordance with the intended purpose / warning gui-
delines............................................................................................................................08
2.5 Equipment in accordance with StVZO..........................................................09
2.6 Riding response..........................................................................................................10
2.6.1 Before each journey........................................................................................ 11
2.6.2 Riding with and without E-drive ..............................................................11
2.6.3 Range................................................................................................................... 12
2.7 Equipment for basic model.................................................................................. 12
2.8 Product overview....................................................................................................... 13
2.8.1 Pennant................................................................................................................ 13
2.9 Overview of equipment / accessories............................................................14
2.10 Drive possibilities ..................................................................................................... 19
3. E-drive. ....................................................................................... 20
3.1 Components................................................................................................................20
3.1.1 Motor .....................................................................................................................20
3.1.2 Battery pack and charger.........................................................................20
3.1.3 Control housing and control.....................................................................20
3.1.4 Display.................................................................................................................20
3.1.5 Torque sensor...................................................................................................20
3.2 Lithium ion battery pack........................................................................................ 21
3.2.1 Charging............................................................................................................. 22
3.2.2 Insertion and removal ................................................................................. 24
3.2.3 Service life......................................................................................................... 24
3.3 Display and operation........................................................................................... 24
3.3.1 Switch on ............................................................................................................ 25
3.3.2 Switch o ........................................................................................................... 25
3.3.3 Start-up assistance ..................................................................................... 25
3.3.4 Setting the assistance level or recovery level................................. 26

04 Contents.
3.3.5 Charge status display .................................................................................27
3.3.6 Functions ............................................................................................................27
3.3.7 Deleting counter readings........................................................................ 29
3.3.8 Brightness switching .................................................................................... 29
3.3.9 Switching the lighting on and o...........................................................30
3.3.10 Registering a PIN .........................................................................................30
4. Settings. ..................................................................................... 31
4.1 Presets ............................................................................................................................. 31
4.1.1 Handlebar adjustment.................................................................................. 31
4.1.2 Saddle adjustment ....................................................................................... 32
4.2 Brakes............................................................................................................................. 33
4.2.1 Parking brake ................................................................................................... 33
4.2.2 Backpedal brake...........................................................................................34
4.2.3 Wheel brake.....................................................................................................34
4.3 Tyres and hoses ........................................................................................................ 35
5. Accessories. ................................................................................ 36
5.1 Dynamic back and pelvic guide pelotte pads.......................................... 36
5.1.1 Width adjustable back and pelvic guide pelotte pads ............. 36
5.2 Headrest ....................................................................................................................... 36
5.3 Push bar........................................................................................................................ 37
5.4 Brake for accompanying escorts..................................................................... 37
5.5 Handlebar lock limiter............................................................................................ 37
5.6 Holding bracket with mount............................................................................... 38
5.7 Universal mount......................................................................................................... 38
5.8 Crank shortener (continuously adjustable)................................................. 39
5.9 Crank shortener......................................................................................................... 39
5.10 Special crank for knee contracture .............................................................. 39
5.11 Exercise bike pedals...............................................................................................40
5.12 Foot positioning pedals ......................................................................................40
5.13 Foot pans ...................................................................................................................40
5.14 Foot pans with leg guidance............................................................................ 41
5.15 Foot pans with dynamic leg guidance ........................................................ 41
5.16 Chest strap ................................................................................................................ 42
5.17 Positioning vest ........................................................................................................42
5.18 Groin harness, T-shaped....................................................................................43
5.19 4-point pelvic harness.........................................................................................43
5.20 Hand positioning aid...........................................................................................43
6. Cleaning and maintaining. .......................................................... 44
6.1 Cleaning and disinfecting ....................................................................................44
6.1.1 Cleaning ..............................................................................................................44
6.1.2 Disinfection........................................................................................................45
6.1.3 Chain maintenance ......................................................................................45

05 Contents.
6.2 Servicing / controls .................................................................................................45
6.3 Maintenance ..............................................................................................................46
6.3.1 Maintenance specifications .....................................................................46
6.3.2 Maintenance plan......................................................................................... 47
6.4 Repairs...........................................................................................................................48
6.5 Controls......................................................................................................................... 49
6.6 Storage..........................................................................................................................49
6.7 Spare parts.................................................................................................................. 49
6.8 Duration of use and re-use.................................................................................49
6.9 Error messages and troubleshooting .............................................................50
7. Technical data. ............................................................................ 54
7.1 Dimensions ....................................................................................................................54
7.2 Drive system................................................................................................................. 55
7.3 Lighting system .......................................................................................................... 56
7.4 Torque specifications.............................................................................................. 57
7.5 Tyre pressure................................................................................................................ 57
8. Guarantee. .................................................................................. 57
9. Identication. ............................................................................. 58
9.1 EU Declaration of Conformity..............................................................................58
9.2 Serial number / date of manufacture............................................................60
9.3 Product version..........................................................................................................60
9.4 Issue of the document ...........................................................................................60
9.5 Name and address of the manufacturer, specialist dealer supplying
the product..................................................................................................................60

06 1. Preparation.1. Preparation.
1.1 Delivery
On receiving the product, please check it for completeness, lack of faults
and any transport damage. Inspect the goods in the presence of your
forwarder. Should transport damage have occurred, please arrange for
an inventory (determination of the faults) to be made in the presence of
the forwarder. Please send a complaint in writing to the specialist dealer
responsible.
1.2 Safety measures prior to use
The correct use of the product requires a detailed and careful instruction
of the user or the accompanying person. We ask you to read through the
Instructions for use carefully prior to initial commissioning of the product,
and to observe them. It is possible that product parts that get in contact
with the skin may heat up in the sun. Cover these areas or protect the de-
vice from direct sunlight.
1.3 Safe disposal
In order to preserve and protect the environment, to prevent environmental
pollution and to improve the recycling of raw materials, please note the
disposal instructions in points 1.3.1 and 1.3.2.
1.3.1 Packaging
The product packaging should be stored in case the product needs to be
transported again. Should you have to return the product for repairs or in
case of a guarantee claim, please if possible use the original box so that
the product is optimally packaged. Separate the packaging materials for
recycling according to their classification.
Do not leave packaging materials unattended, as they are a possible source of
danger.
1.3.2 Product
Separate the raw materials used in the product for recycling according to
their classification (see material information under Point 2.1). The electrical
components and the drive system battery pack must not be disposed of
with household waste. These must be returned to the designated public
collection points or to your specialist dealer (see Point 9.5).
1.4 Where to store the Instructions for use
Please store these Instructions for use carefully and ensure that these
Instructions for use remain with the product in case of re-use.

07 2. Product description.2. Product description.
2.1 General information
The momo motion. is a tricycle, which is already equipped with an electric
drive in the basic model and was designed for outdoor use.
The base frame is made of aluminium, which is non-corroding and pow-
der-coated. The handles are made of rubber and all other materials used
are protected against corrosion through the use of stainless steel, alumini-
um or plastic. The body supports and harnesses are made of 100% polyes-
ter and are flame resistant (according to DIN EN 1021-1+2). The foam used
for the body supports is made of PU (polyurethane).
2.2 Handling and transport
The momo motion. is not designed to be carried, as it is fitted with tyres.
Should you have to carry the equipment due to obstacles, ensure that all
moving parts are tightened. Then two people should position themselves
next to the tricycle, grip it on the left and right of the frame and carry it to
the required location. To transport the tricycle, reduce all adjustments to
their most compact size (saddle height, handlebar height, remove acces-
sories etc.).
Take out the battery pack for transport and take it with you, kept in a cool place
in the vehicle.
2.3 Application areas, use according to the intended purpose
The momo motion. tricycle with e-drive is a medical product of risk class 1
and was designed especially for children, youths and adults for outdoor
use. Any other use or use over and above this purpose shall be considered
not in accordance with the intended purpose.
2.3.1 Indications
The momo motion. is suitable for users with neuromuscular,(neurological,
orthopaedic and neurodegenerative) disorders (such as cerebral palsy
and muscular dysplasia and atrophy, rheumatism) as well as cardiovascu-
lar diseases and chromosomal abnormalities associated with hypotension.
Due to their motor limitations (reduced muscle strength and endurance,
cardio-respiratory limitations, joint mobility limitations, etc.), these patients
have limited use of foot pedal-operated tricycles.
The momo motion. is used to support physiotherapeutic treatment, the
training of balance reactions and movement coordination (alternating leg
movements, eye-hand coordination, training isolated arm and leg mo-
vements). The function of start-up assistance is particularly important.
It is also used for the specific development of muscle strength and en-
durance (with appropriate indication also for avoiding overloading of

08 2. Product description.
2.3.2 Contraindications
In general, the indication should be accompanied by a doctor/orthopae-
dist. It should therefore be clarified prior to procurement whether contrain-
dications exist for the patient. Any danger to the user or others through the
use of a tricycle should be excluded. In general, any type of pain repre-
sents a contraindication.
2.4 Use not in accordance with the intended purpose / warning guide-
lines
• Only ride if the bicycle is in proper condition!
• Correct usage of the product requires precise and
careful training of the accompanying person.
• Replace bent handlebars and handlebar stems immediately.
Breakage may occur in the event of continued use or repairs.
• The tricycle may only be used on stable and flat ground.
• Please observe the "Technical data" in these instructions for use for the
maximum permitted user weight.
• Always wear light-coloured and distinctive clothing.
• Always be ready to brake, in particular in steep terrain
and sections which are not easy to assess.
• Show consideration for other people who are walking or hiking.
• Do not hang loads on the handlebars; this compromises the
travel safety.
• Test the fastenings for the pedal cranks, pedals and, if applicable, the
wheels regularly.
• Check that the brakes, lights and bell function properly prior to
each journey.
• For your own safety, we recommend that you always use your tricycle
with a helmet. Please ensure in particular that the helmet is of good
quality. It should accord at least with the legal regulations or recom-
mendations (standard: EN 1078 or ANS).
• Secured screws must not be loosened, otherwise the guarantee is lost.
• Ensure that your tricycle accords with the legal requirements.
• Do not use headphones, for example, so that you can remain aware of
warning sounds.
• If a push bar is mounted, this may only be used to guide the tricycle. The
push bar is NOT suitable for moving, lifting or tilting the tricycle.
the muscles with simultaneous function preservation). The mobility of the
joints is supported and the restrictions are counteracted by insucient
cardio-respiratory function of the patients. The function of residual power
support is hereby emphasised.

09 2. Product description.2. Product description.
• In wet conditions, the braking distance of your tricycle will become lon-
ger. Therefore, always ensure that your speed remains such that you can
stop at any time.
• The tricycles are not suitable for carrying a second person. The
consequences arising from such a use shall not fall within the
scope of responsibility of the manufacturer.
• The bicycle basket may only bear loads of up to 20 kg.
• When adjusting the tricycle there is the risk of trapping or crushing limbs.
• Users who have diculty reading must have someone read these
Instructions for use aloud so that they understand how to use
the product.
• Remove the battery pack before cleaning.
• For longer trips with the help of the electric drive, the motor can beco-
me very hot. Do not touch the motor after riding under heavy strain.
• Damaged electrical assemblies and cables can lead to
short-circuiting.
• The motor can start to move unexpectedly when the drive system re-
mains switched on when working on the tricycle. Clothing can be pulled
into rotating parts of the drive. This can result in injuries.
• The tricycle must be stored out of the reach of users who cannot
assess the risks involved.
2.5 Equipment in accordance with StVZO
The momo motion. corresponds with the requirements in accordance with
StVZO and is equipped as follows:
• Two brakes functioning independently of one another
• A bicycle bell with a clear ring
• Headlamps, rear lamp with reflectors, large-area reflectors, pedal
reflectors, 2 yellow spoke reflectors or white reflecting rings on each
wheel, and front reflectors in the design tested for the construction type.

10 2. Product description.
2.6 Riding response
The momomotion. has a dierent riding response compared to conventional
bicycles and tricycles without electric assistance. We therefore recom-
mend initially becoming familiar with the momo motion. o public roads
without assistance from the electric drive. When using the electric drive,
please start with the lowest assistance level to gain confidence in using
the tricycle.
Consider the following aspects when riding:
• Before starting to ride, check the functionality of the brakes
with a test brake.
• Always drive carefully on wet, smooth and loose ground and avoid jerky
pedaling.
• Steering is controlled exclusively with the hands, a shift of the body’s
centre of gravity (for example when taking a corner) does not aect the
steering response.
• When riding and especially when turning, you must always pay
attention to the total width of the rear wheels. This diers significantly
compared to conventional bicycles.
• During fast cornering, care should be taken to ensure that the speed is
reduced in advance, as a tricycle can also topple over.
• Never ride without hands.
• Drive with lighting in dark conditions and poor visibility to increase
visibility for other road users.
• We recommend wearing a bicycle helmet for your own safety.
• Avoid continuous operation in a salty environment as this will promote
damage from corrosion.
• Be sure to keep both hands on the handlebars when accelerating.
When using the electric drive and in conjunction with the start-up as-
sistance, the acceleration changes.
• When braking, always operate both independent brake systems. During
long downhill runs, this is essential to avoid overheating. This may lead
to malfunctions! See Point 4.2 for further information.
For longer trips with the help of the electric drive, the motor can become very
hot. Do not touch the motor after riding under heavy strain.

11 2. Product description.2. Product description.
2.6.1 Before each journey
Before each journey, check and ensure the following:
• Cracks or splits on the tricycle frame
• Missing parts
• Malfunctions
• Tight fit of motor, battery pack and electrical connectors
• Intactness of all cables and their secure attachment to the frame
• Tight fit of all screws and nuts
• Safe function of the brakes, brake shoes do not rub on the rims
• Sucient tyre pressure (max. pressure is marked on the casing,
see Point 4.3. or 7. 4 )
• Smooth running of all bearings (bottom bracket, wheels, steering) and
quiet wheel travel
In case of a defect or malfunction, please contact the specialist dealer
who supplied you with the product (see Point 9.5).
The tricycle should be taken to your specialist dealer every 1000 km, but
at least once a year for inspection.
2.6.2 Riding with and without E-drive
The momo motion. can be used both with and without the assistance of
the electric drive.
Operating instructions
The momo motion. has a built-in torque sensor. It is combined with the
bottom bracket and is completely integrated. It supplies the signals of the
pedaling torque, the pedaling frequency and the direction of rotation of
pedaling to the control.
When the E-drive is activated, the motor provides support only when the
pedals are operated. This is done as soon as the signals of the torque
sensor are transmitted to the control. If the pedals are no longer operated,
the sensor will no longer send any signals to the control and the motor
support is terminated.
The only possibility of driving without pedal operation is provided by the
optional start-up assistance (see Point 3.3.3). It allows starting with electri-
cal assistance without pedaling up to a speed of max. 6 km/h.

12 2. Product description.
2.7 Equipment for basic model
• with Heinzmann Direct Power
Motor (36V, 250W, impulse torque
60Nm)
• Battery pack and charger
• Aluminium frame with extra-low
access point
• Rim brake with separate
parking brake
• Angle adjustable handlebar stem
• Handlebar damper for stabilisati-
on when moving straight on
• Lighting system according to StV-
Zo, which is powered by the Li-ion
high-power battery pack (11Ah)
• incl. mudguards and basket
• removable pennant
2.6.3 Range
The range of the momo motion. depending on the following factors:
• Course (gradients)
• Load/rider weight
• Selected assistance level
• Riding style.
The manufacturer of the drive system, HEINZMANN, estimates a range of 40
to 80 km per battery pack charge.

13 2. Product description.
Basket
Back pelotte pad Angle adjustable
handlebar stem
E-drive
Pedal
Aluminium frame with
extra-low access point
Lever for parking brake
V-brake
Display for E-drive
Gear system
Mudguard
Battery pack
for E-drive
Torque sensor
Handlebars
T-saddle post
Saddle
Holding bracket
removable pennant
2.8 Product overview
The Fig. below is intended to show you the designation of the most im-
portant components as well as the terms which you will find in these Inst-
ructions for use.
2.8.1 Pennant
The pennant shown above is for better visibility of the
momo motion. and therefore obviously also of the user.
The pennant together with the plastic rod (about 160
cm long) is attached to the rear axle.
For easy handling, the pennant can be removed and
can easily be re-inserted into the rear axle mount (A),
which is already mounted on delivery.
A

14
2.9 Overview of equipment / accessories
2. Product description.
DirectPower E-drive from Heinzmann
The new momo motion. is equipped with the DirectPower E-drive from Heinzmann. This allows us to oer you
a wear-free and silent direct drive. The motor is designed to be brushless and without gears. This minimises
maintenance and wear and eliminates motor noise. The recuperative system automatically recharges when
driving downhill or braking. This means that the range can be increased by up to 15 %. The existing force of
the user is measured by a force sensor integrated in the bottom bracket, and the assistance from the electric
drive is adjusted.
Choose the suitable E-drive for the momo motion. from the following configurations. You can choose whether
the drive should be equipped with or without start-up assistance. In addition, you can choose between a
beginner version and an advanced version. The dierence here is the start-up and the top speed of the va-
rious modes Eco, Standard and Power, which can be selected via the display. An analysis cable can be used
to change the selected version at a later date.
DirectPower E-drive from Heinzmann – without start-up assistance
for
size Revision Start-up handling / top speed
Eco Standard Power
16“ Beginner (36 02 070) gentle / 4 km/h medium / 4 km/h strong / 6 km/h
Advanced (36 02 071) medium / 6 km/h strong / 8 km/h strong / 10 km/h
20“ Beginner (36 03 070) gentle / 4 km/h medium / 4 km/h strong / 6 km/h
Advanced (36 03 071) medium / 6 km/h strong / 8 km/h strong / 12 km/h
24“ Beginner (36 04 070) gentle / 6 km/h medium / 8 km/h strong / 12 km/h
Advanced (36 04 071) gentle / 10 km/h medium / 15 km/h strong / 20 km/h
26“ Beginner (36 05 070) gentle / 6 km/h medium / 8 km/h strong / 12 km/h
Advanced (36 05 071) gentle / 10 km/h medium / 15 km/h strong / 20 km/h
DirectPower E-drive from Heinzmann – with start-up assistance
Select whether the start-up assistance should
be activated by pressing the button (fig. 1) or
by turning the twist grip (fig. 2).
for
size Model
Start-up handling / top speed
Start-up
assistance Eco Standard Power
16“
Beginner with twist grip (36 02 072) 4 km/h mild /
4 km/h
medium /
4 km/h
strong /
6 km/h
Beginner with button (36 02 073)
Advanced with twist grip (36 02 074) 6 km/h medium /
6 km/h
strong /
8 km/h
strong /
10 km/h
Advanced with twist grip (36 02 075)
20“
Beginner with twist grip (36 03 072) 4 km/h mild /
4 km/h
medium /
4 km/h
strong /
6 km/h
Beginner with button (36 03 073)
Advanced with twist grip (36 03 074) 6 km/h medium /
6 km/h
strong /
8 km/h
strong /
12 km/h
Advanced with twist grip (36 03 075)
24“
Beginner with twist grip (36 04 072) 6 km/h mild /
6 km/h
medium /
8 km/h
strong /
12 km/h
Beginner with button (36 04 073)
Advanced with twist grip (36 04 074) 6 km/h mild /
10 km/h
medium /
15 km/h
strong /
20 km/h
Advanced with twist grip (36 04 075)
26“
Beginner with twist grip (36 05 072) 6 km/h mild /
6 km/h
medium /
8 km/h
strong /
12 km/h
Beginner with button (36 05 073)
Advanced with twist grip (36 05 074) 6 km/h mild /
10 km/h
medium /
15 km/h
strong /
20 km/h
Advanced with twist grip (36 05 075)
Fig. 1 Fig. 2

15 2. Product description.
Saddle posts
Art. No. Saddle post
3702004 Standard saddle post Size 2 for 16"
3703004 Standard saddle post Size 3 for 20" - 26"
Art. No. T-saddle post
3702005 T-saddle post Size 2 for 16" + 20"
3703005 T-saddle post Size 3 for 24" + 26"
Saddles
Art. No. Saddle Width Length
3701001 Standard saddle Size 1 15 cm 21 cm
3702001 Standard saddle Size 2 15 cm 24 cm
3703001 Standard saddle Size 3 18 cm 26 cm
Art. No. Saddle Rear width Front width Length
3701024 Gel saddle Size 1 19 cm 4 cm 24 cm
3702024 Gel saddle Size 2 24 cm 7 cm 27 cm
Art. No. Saddle Rear width Front width Rear length Length
total
3701003 Saddle seat with ischi-
al depressions Size 1 20.5 cm 4 cm 9.5 cm 14.5 cm
3702003 Saddle seat with ischi-
al depressions Size 2 24 cm 4 cm 9.5 cm 14.5 cm
Art. No. Saddle Rear width Width in centre Front width Length
3700 010
Unicycle saddle –
banana-shaped
(Step length increases
by 2 cm)
11 cm 6 cm 8 cm 25 cm
Art. No. Saddle Rear width Front width Rear length Length
total
3700 023
Moped saddle (Inside
leg length increases
by 2 cm)
26 cm 9.5 cm 12 cm 25 cm
Holder bracket
Art. No. Holding bracket with mount Max. height* Depth
3701007 Holder bracket Size 1 20 cm 12 cm
3702007 Holder bracket Size 2 30 cm 12 cm
3703007 Holder bracket Size 3 37 cm 12 cm
3704 007 Holder bracket Size 4 53 cm 12 cm
3709 007 Holder bracket, customer-made ___ cm ___ cm
3702055 Universal bracket – for harnesses when not using
pelotte pads (width = 27.5 cm)
* Max. height: Measured on a standard saddle up to the top edge of the back pelotte pad

16 2. Product description.
Foot pans
Art. No.
Foot pans
with leg
guidance
Min.
width
at front
Max.
Front
width
Min.
width
at rear
Max.
Rear
width
Length
Min.
height of
leg gui-
dance
Max.
height
Leg gui-
dance
3701018 Size 1 8.7 cm 10.4 cm 5.7 cm 7.4 cm 17.4 cm 15 cm 18.5 cm
3702018 Size 2 9.5 cm 12 cm 6.7 cm 9.2 cm 20.1 cm 18 cm 22 cm
3703018 Size 3 11.5 cm 14 cm 8.1 cm 10.6 cm 23.8 cm 21 cm 26 cm
3704 018 Size 4 11.5 cm 14 cm 8.1 cm 10.6 cm 23.8 cm 28 cm 36 cm
Art. No. Foot pans
Min.
width
at front
Max.
width
at front
Min.
width
at rear
Max.
width at
rear
Length
3701017 Foot pans Size 1 8.7 cm 10.4 cm 5.7 cm 7.4 cm 17.4 cm
3702017 Foot pans Size 2 9.5 cm 12 cm 6.7 cm 9.2 cm 20.1 cm
3703017 Foot pans Size 3 11.5 cm 14 cm 8.1 cm 10.6 cm 23.8 cm
Handlebars
Art. No. Classic handlebars – black Width
3702011 Classic handlebars for 16" 50 cm
3703011 Classic handlebars for 20" 58 cm
3704 011 Classic handlebars for 24"-26" 61 cm
Art. No. Touring handlebars Width Depth
3701012 Touring handlebars Size 1 55 cm 17 cm
3702012 Touring handlebars Size 2 58 cm 17 cm
Art. No. Round handlebars Width Depth
3701013 Round handlebars Size 1 40 cm 17 cm
3702013 Round handlebars Size 2 43 cm 25 cm
Art. No. Multifunctional handlebars – suitable for 20" – 26" Width Depth
3702014 Multifunctional handlebars 61.5 cm 16.5 cm
Art. No. Handlebar lock limiter – adjustable up to direction determination
3703006 Handlebar lock limiter Size 2 for 16" - 26"
Art. No. Handlebar extension Length
3702022 Handlebar extension Size 2 for 16" - 26" 10 cm
Headrest
Art. No. Headrest Width Height
3701029 Headrest Size 1 20 cm 15 cm
3702029 Headrest Size 2 23 cm 18 cm

17 2. Product description.
Pedals
Art. No. Pedals Depth
3700 013 Foot positioning pedals – with bike toe clips and compensation weights 13 cm
Art. No. Pedals Width
3700 014 Exercise bike pedals 12 cm
Back pelotte pads
Art. No. Dynamic back pelotte pads – padded with strap and mount Width
3701008 Dynamic back pelotte pad Size 1 20 - 30 cm
3702008 Dynamic back pelotte pad Size 2 25 - 35 cm
3703008 Dynamic back pelotte pad Size 3 30 - 40 cm
Art. No. Width adjustable back pelotte pad - padded, including mount Width
3701025 Width adjustable back pelotte pad Size 1 20 - 28 cm
3702025 Width adjustable back pelotte pad Size 2 25 - 33 cm
3703025 Width adjustable back pelotte pad Size 3 30 - 36 cm
Pelvic supports
Art. No. Dynamic pelvic guidance pelotte pad – padded, with strap
and mount Width
3701009 Dynamic pelvic guidance pelotte pad Size 1 20 - 30 cm
3702009 Dynamic pelvic guidance pelotte pad Size 2 25 - 35 cm
3703009 Dynamic pelvic guidance pelotte pad Size 3 30 - 40 cm
Art. No. Width adjustable back guidance pelotte pad - padded, including
mount Width
3701026 Width adjustable pelvic guidance pelotte pad Size 1 20 - 28 cm
3702026 Width adjustable pelvic guidance pelotte pad Size 2 25 - 33 cm
3703026 Width adjustable pelvic guidance pelotte pad Size 3 30 - 36 cm
Foot pans
Art. No.
Foot pans
with dy-
namic leg
guidance
Min.
width
at front
Max.
width
at front
Min.
width
at rear
Max.
width
at rear
Length
Min.
height of
leg gui-
dance
Max.
height
Leg gui-
dance
3701035 Size 1 8.7 cm 10.4 cm 5.7 cm 7.4 cm 17.4 cm 15 cm 18.5 cm
3702035 Size 2 9.5 cm 12 cm 6.7 cm 9.2 cm 20.1 cm 18 cm 22 cm
3703035 Size 3 12 cm 15 cm 8.8 cm 11.8 cm 24 cm 20.5 cm 25.5 cm

18 2. Product description.
Positioning
Art. No. Chest strap – for the width adjustable back pelotte pad Width Length
3701050 Chest strap Size 1 5 cm 18.5 cm
3702050 Chest strap Size 2 6.5 cm 25.5 cm
3703050 Chest strap Size 3 7 cm 30.5 cm
Art. No. Positioning vest – for the width
adjustable back pelotte pad
Inside
width
Total
width
Side
height Total height
3701051 Positioning vest size 1 8 cm 25 cm 10 cm 28 cm
3702051 Positioning vest size 2 9 cm 30 cm 12 cm 30 cm
3703051 Positioning vest size 3 12 cm 34 cm 16 cm 35 cm
Art. No.
Groin strap, T-shaped – for the
width adjustable pelvic pelotte
pad
Width
Seat
surface
Front
width
Length
Seat
surface
Total length
3701052 Groin harness, T-shaped Size 1 24 cm 23 cm 15 cm 32 cm
3702052 Groin harness, T-shaped Size 2 26 cm 26 cm 17 cm 34 cm
3703052 Groin harness, T-shaped Size 3 28 cm 28 cm 19 cm 38 cm
Art. No.
4-point pelvic harness - for the
width adjustable pelvic pelotte
pad
Width
Exterior
parts
Width
Centre
section
Length
Exterior
parts
Length
Centre
section
3701053 4-point pelvic harness Size 1 7 cm 7 cm 12 cm 12 cm
3702053 4-point pelvic harness Size 2 9 cm 8.5 cm 13 cm 14 cm
3703053 4-point pelvic harness Size 3 11.5 cm 11 cm 15 cm 16 cm
Handlebars
Art. No. Push bar - height adjustable, removable and equipped with an integrated anti-ro-
tation lock
3600 012 Push bar
Art. No.
Brake for accompanying person – incl. motor switch-o (can only be used in
connection
with push bar)
3608 012 Brake for accompanying escorts

19 2. Product description.
2.10 Drive possibilities
The momo motion. can be equipped with
the following drives:
Freewheel brake hub (with backpedal
brake)
The freewheel brake hub allows the user
to stop and start pedaling as they wish.
They can brake by pedaling backwards.
3 or 7-gear freewheel brake hub (with
backpedal brake)
Using the 3 or 7-gear freewheel brake hub, the user can stop and start
pedaling at will. They can brake by pedaling backwards. The user-friendly
3 or 7-gear hub gear system permits switching of gears when the tricycle
is at a standstill. Switching takes place using the twist grip shifter on the
handlebars.
3-gear freewheel brake hub. can be ridden backwards
The user can stop and start pedaling at will with the 3-gear freewheel
brake hub. In addition, they can ride backwards. The user-friendly 3-gear
hub gear system permits switching of gears at a standstill. Switching takes
place using the twist grip shifter on the handlebars.
7-gear freewheel brake with wheel brake (without backpedal brake)
In the 7-gear freewheel hub with wheel brake forward, the movement can
be interrupted as desired and be converted in free backwards pedaling in
further forward drive. The user-friendly 7-gear hub gear system is suitable
for any terrain and also permits switching of gears when the bicycle is at
a standstill. Switching takes place using the twist grip shifter on the hand-
lebars.

20 3. E-drive.
3.1 Components
3.1.1 Motor
The momo motion. is equipped with a
rushless electric motor (A) as a power
source. This provides both a strong tor-
que in continuous operation as well as
considerable peak torques (for example
when starting). Mechanical losses are
negligible because the motor is desi-
gned without a gearbox.
3.1.2 Battery pack and charger
The battery pack (B) serves as the pow-
er source of the drive system “DirectPo-
wer”. The high capacity oers maximum
riding performance and range. A suitable charger (C) for charging the bat-
tery pack from the electrical mains is included in the scope of delivery of
the momo motion.
3.1.3 Control housing and control
The electronic control is eectively the brain of the drive system. Its task is
to evaluate all signals and to control the motor, taking into account the set
parameters, so that it achieves the appropriate force. The control housing (D)
made of plastic reliably protects the controller against wetness and
moisture as well as against shocks and similar influences.
3.1.4 Display
The display (E) together with the operating unit is the control centre of
the drive system. For example, you can select the level of assistance or
recovery and make all other settings. In addition, you will receive all the re-
quired information about the operating status of the system, the distance
and the range.
3.1.5 Torque sensor
The torque sensor (F) is combined with the bottom bracket and is comple-
tely integrated. It supplies the signals of the pedaling torque, the pedaling
frequency and the direction of rotation of pedaling to the control. The tor-
que sensor is completely maintenance-free and requires no adjustment.
A
C
D
B
E
F
B