Schuchmann FRIDOLIN Maxi User manual

Instructions for use.
fridolin maxi. The functional sub-frame for indoor use.
fridolin maxi.

Many thanks.
Dear Customer
At this point we would like to thank you for placing your trust in our company and
for purchasing our product. We ask you to read through the Instructions for use carefully
prior to initial commissioning of the product, and to observe them. Please note that
guidelines and representations in these Instructions for use may deviate from your
product due to diering equipment. We reserve the right to make technical modifications.
Important information!
Ensure that these Instructions for use remain with the product.
Your schuchmann Team

03 Contents.
1. Preparation. ................................................................................ 04
1.1 Delivery............................................................................................................................04
1.2 Safety measures prior to use ..............................................................................04
1.3 Safe disposal...............................................................................................................04
1.3.1 Packaging...........................................................................................................04
1.3.2 Product................................................................................................................04
1.4 Where to store the Instructions for use..........................................................04
2. Product description. .................................................................... 05
2.1 Material information ................................................................................................05
2.2 Handling/transport................................................................................................05
2.3 Application areas, use according to the intended purpose .............05
2.3.1 Indication ...........................................................................................................05
2.3.2 Contraindications .........................................................................................05
2.4 Use not in accordance with the intended purpose / warning gui-
delines............................................................................................................................06
2.5 Equipment for basic model.................................................................................06
2.6 List of accessories....................................................................................................06
2.7 Product overview......................................................................................................07
3. Settings. ..................................................................................... 08
3.1 Seat height...................................................................................................................08
3.2 Seat angle...................................................................................................................08
3.3 Dual castors................................................................................................................08
4. Accessories. ................................................................................ 09
4.1 Maxi push handle .....................................................................................................09
4.2 foot support................................................................................................................09
4.3 Plug-in footrest .........................................................................................................09
4.4 Wheel base extension............................................................................................10
5. Cleaning and maintaining. .......................................................... 10
5.1 Cleaning and disinfecting .....................................................................................10
5.1.1 Cleaning ...............................................................................................................10
5.1.2 Disinfection.........................................................................................................10
5.2 Servicing ......................................................................................................................... 11
5.3 Maintenance ................................................................................................................ 11
5.3.1 Maintenance specifications ....................................................................... 11
5.3.2 Maintenance plan.......................................................................................... 12
5.4 Spare parts .................................................................................................................. 12
5.5 Duration of use and re-use.................................................................................. 12
6. Technical data. ............................................................................ 13
7. Guarantee. .................................................................................. 13
8. Identication. ............................................................................. 14
8.1 EU Declaration of Conformity..............................................................................14
8.2 Serial number / date of manufacture............................................................ 15
8.3 Product version .......................................................................................................... 15
8.4 Issue of the document ........................................................................................... 15
8.5 Name and address of the manufacturer, specialist dealer sup-
plying the product.................................................................................................... 15

04
1.1 Delivery
On receiving the product, please check it for completeness, lack of faults
and any transport damage. Inspect the goods in the presence of your
forwarder. Should transport damage have occurred, please arrange for
an inventory (determination of the faults) to be made in the presence of
the forwarder. Please send a complaint in writing to the specialist dealer
responsible.
1.2 Safety measures prior to use
The correct use of the product requires a detailed and careful instruction
of the user or the accompanying person. We ask you to read through the
Instructions for use carefully prior to initial commissioning of the product,
and to observe them. It is possible that product parts that get in contact
with the skin may heat up in the sun. Cover these areas or protect the de-
vice from direct sunlight.
1.3 Safe disposal
In order to preserve and protect the environment, to prevent environmental
pollution and to improve the recycling of raw materials, please note the
disposal instructions in points 1.3.1 and 1.3.2.
1.3.1 Packaging
The packaging of the product should be kept for any future transport that
might be required. Should you have to return the product for repairs or in
case of a guarantee claim, please if possible use the original box so that
the product is optimally packaged. Otherwise, separate the packaging
materials for recycling according to their classification.
Do not leave packaging materials unattended, as they are a possible source of
danger.
1.3.2 Product
Attheendoftheproductlifecycle,recycletherawmaterialsusedintheproduct
according to their nature (see material information under point 2.1).
1.4 Where to store the Instructions for use
Please store these Instructions for use carefully and ensure that these Inst-
ructions for use remain with the product in case of re-use. Should you lose
the instructions, you can always download an updated version at www.
schuchmann.de .
1. Preparation.

05 2. Product description.
2.1 Material information
The sub-frame is made of steel which is non-corroding and powder-coated.
2.2 Handling / transport
The sub-frame is not designed to be carried, as it is fitted with castors.
Should you have to carry the equipment due to obstacles, ensure that all
moving parts are tightened. Then position yourself next to the sub-frame,
grip it on both sides under the support head and carry it to the required
location. To transport the sub-frame, reduce all adjustments to their most
compact size (fold up foot support, set lowest seat height etc.).
Tighten all moving parts prior to carrying!
2.3 Application areas, use according to the intended purpose
The fridolin maxi. indoor sub-frame is a medical product of risk class 1 and
is suited exclusively for indoor use. The sub-frame is designed as substruc-
ture to accommodate seating systems or seat pans. Any other use or use
over and above this purpose shall be considered not in accordance with
the intended purpose.
2.3.1 Indication
The indication for the fridolin maxi. sub-frame is derived from those of the
seating systems and seat pans.
2.3.2 Contraindications
In general, the indication for a seat pan sub-frame in combination
with a seating system or a seating pan should be accompanied by a
medical-orthopaedic specialist. It should therefore be clarified prior to
procurement whether contraindications exist for the patient. In general,
any type of pain represents a contraindication.

06
2.4 Use not in accordance with the intended purpose / warning guide-
lines
• Make sure that the sub-frame in combination with a seat pan is only
used by one user.
• Never leave the user unattended.
• Do not use sub-frame in combination with a seat pan for the
transportation of a person.
• Correct usage of the sub-frame requires precise and careful training of
the accompanying person.
• The max. load (see Point 6) may not be exceeded.
• Do not use the sub-frame if it has defective, worn or missing parts.
• Use only accessories and spare parts made by Schuchmann, otherwise
you will compromise the safety of the user.
• Only use the sub-frame if all components have been correctly mounted
and adjusted.
• Please ensure that none of the user's extremities are in the respective
area when making adjustments of any kind to minimise the risk of injury.
• Users with visual, reading or mental impairments must have someone
read these Instructions for use aloud so that they understand how to
use the gait trainer.
2.5 Equipment for basic model
• The seat height is adjustable using a crank, and the angular adjustment
of the seat unit can be operated through two gas pressure springs à
200N via a foot pedal
• Inc. 4 dual castors (100 mm). 2 with locking devices
• incl. support head and foot support insert
• Frame colour: metallic anthracite
2.6 List of accessories
• Maxi push handle
• Wheel base extension
• Maxi support head
• Trapezoidal adapter lower part Size 1
• Trapezoidal adapter top part Size 1
• Aluminium foot support
• Plug-in foot support
2. Product description.

07 2. Product description.
2.7 Product overview
The fig. below is intended to show you the designation of the most
important components as well as the terms which you will find in these
Instructions for use.
Push handle
Gas pressure springs for angle
adjustment of the seating unit
Foot pedal for angle
adjustment of the seating unit
Dual castor with
locking device
Support head
Central column
Dual
castor
Crank for
seat height adjustment

08 3. Settings.
Settings and adjustments to the product or accessories may only be made
by people who have been given the necessary instructions by a medical
product advisor. Please ensure that none of the user's extremities are in
the respective area when making adjustments of any kind to minimise the
risk of injury.
3.1 Seat height
The sub-frame can be adjusted by up
to 12 cm in height; the product is sup-
plied adjusted to the lowest setting.
Adjustment is carried out by actuating
the crank (A) below the base frame. In
addition, both gas pressure springs on
the seat angle adjustment must be
readjusted in height. This is done after
dismantling the screw connections at
the lower end of the two gas pressure
springs and moving the lugs (B) in the
hole pattern on the base frame. This
adjustment should be undertaken by
your specialist dealer.
3.2 Seat angle
The seat angle can be adjusted with
the aid of 2 gas pressure springs (à
200N) from (-)5° to 30°. To do this, ac-
tuate the foot pedal (C) and move the
seat unit to the required angle.
3.3 Dual castors
The sub-frame should always be pre-
vented from rolling away inadvertent-
ly through braking of the 2 rear dual
castors. To do this, press the brake (D)
down with the tip of your foot.
The brake serves merely to prevent
inadvertent rolling away on level
surfaces.
A
C
D
B

09 4. Accessories.
4.1 Maxi push handle
The Maxi push handle can be adjusted
in height and angle. In order to adjust
the height, loosen both clamping le-
vers (A), bring the Maxi push handle
into the required position and pull the
clamping lever tight once more. In or-
der to adjust the angle, please loo-
sen the two clamping levers (B), move
the Maxi push handle to the required
angle and pull the clamping lever tight
once more.
4.2 foot support
For fridolin maxi. there are dierent
foot support variants that are atta-
ched to the support head. After the
respective foot support has be inser-
ted in the support head (C) and the
depth has been set, the knee angle
can be fixed using the two clamping
levers (D). The lower leg length can
be individually adapted, and the foot
supports can be folded up and the
angle adjusted depending on the va-
riant.
After each adjustment, please retighten
all screw connections!
4.3 Plug-in footrest
The easy to plug-in footrest allows
easy transfer within dierent rooms.
To mount the footrest, first plug the
rear positioner (E) into the base fra-
me and fold it downwards. Ensure that
the snap locks (F) engage correctly. In
order to remove the footrest, pull out
the two snap locks (F) and lift up the
footrest.
AA
B
C
D
E
F
D

10 4. Accessories.
4.4 Wheel base extension
The wheel base extension is used to guarantee stability even for larger
seating systems when the seat is inclined backwards.
The wheel base extension cannot be adjusted!
5. Cleaning and maintaining.
5.1 Cleaning and disinfecting
5.1.1 Cleaning
Please clean all frame elements regularly with a spon-
ge or damp cloth; making sure that water droplets are
removed. Please clean with a mild household deter-
gent for severer dirt. Thorough drying of the cleaned
areas is important.
All fabrics that cannot be removed can be wiped with
a moist cloth. For all removable fabrics please pay at-
tention to the sewn-in care labels (such as A+ B) on the
respective element.
Please also pay attention to our general clea-
ning and hygiene advice. This can be found at
www.schuchmann.de/mediathek.
5.1.2 Disinfection
Various products can be used for surface disinfection of metal and plastic
parts.
Liquid disinfectants are available as ready-to-use solutions that are spray-
ed on and evenly applied with a soft cloth. Alternatively, wipes pre-soaked
with disinfectant can be used to wipe the products over the entire surface.
In both cases, care must be taken to ensure complete wetting. Disinfection
in fully automatic disinfection systems is also possible and recommended.
The exposure times may vary and can be found in the manufacturer's ins-
tructions for the products used.
7190045
A
Obermaterial/
top cloth/dessus:
100% Polyester
B

11
5.2 Servicing
Please carry out a visual inspection on a daily basis and regularly check
the product for cracks, breaks, missing parts and malfunctions. In case of a
defect or malfunction, please contact the specialist dealer who supplied
you with the product (see Point 8.5).
5.3 Maintenance
For reasons of user safety and to retain product liability, the product must
be subjected to maintenance by a specialist dealer at least once a year
(see Point 8.5). The maintenance work carried out must be documented in
the maintenance plan (see Point 5.3.2).
5.3.1 Maintenance specications
• Basic cleaning according to the manufacturer's specifications
• Disinfect according to the manufacturer's specifications as required
• Damages to the frame, mounting parts and accessories (cracks, breaks,
corrosion, bent or missing parts)
• Strength of the connections (tighten loose screws, replace
missing screws)
• Functionality of the adjustment elements (screws, release lever, latching
elements, foot pedal)
• Functionality of other adjustment elements (push bar and footrests)
• Functionality of the gas pressure springs (if necessary readjustment of
the bowden cables)
• Functionality of the safety elements (anti-tilt)
• Functionality of brakes
• Functionality of the rollers (concentricity, smooth running)
• Legibility of the type label
• Final complete functional check of the aid
• Check that all mounting parts and associated accessories are
correctly fastened
5. Cleaning and maintaining.

12 5. Cleaning and maintaining.
5.3.2 Maintenance plan
Maintenance specifications of the manufacturer (see Point 4.3.1) were car-
ried out:
Date Company Name Signature
Any defects or damage found must be repaired by the specialist dealer or the
manufacturer before reuse.
5.4 Spare parts
Only use original accessories and original spare parts from the manufactu-
rer, otherwise you will endanger the user and the warranty becomes void.
To order spare parts, please contact the supplying specia-
list dealer (see point 8.5) stating the serial number of the product.
Necessary spare parts and accessories must only be installed by trained
personnel.
5.5 Duration of use and re-use
The expected duration of use of our product, dependent on the usage in-
tensity and amount of re-use, totals up to "8" years if the usage takes place
in accordance with the information in these Instructions for use. It may be
possible to use the product over and above this time period if it is in a safe
condition. The expected duration of use does not refer to wear parts, such
as for example covers, wheels, batteries.....The maintenance and evaluation
of the condition, and if applicable the potential for re-use, must be deci-
ded by the specialist dealer. The seat pan sub-frame is suitable for re-use.
Prior to forwarding on, please follow the cleaning instructions in point 5.1.
Accompanying documents such as these Instructions for use are part of
the product and must be passed on to the new user. No disassembly is
required prior to re-use.

13 6. Technical data.
7. Guarantee.
The two-year statutory guarantee period shall apply for all products. This
begins with the delivery or handover of the goods. Should a verifiable ma-
terial or manufacturing fault occur within this time period, we shall, after
carriage paid return to us, view the indicated damage and, if applicable,
either repair or deliver a new product at our discretion.
AHeight of seat pan support 44 - 56 cm
BSeat angle (-) 5° - 30°
CTotal length 80 cm
DTotal width 66 cm
Thickness of the gas pressure spring for tilt adjustment 2 x 200 N
max. load 100 kg
Weight 11.5 kg
Dimensions

14 8. Identication.
8.1 EU Declaration of Conformity
EU Konformitätserklärung
EU Declaration of Conformity
Firma / Company Schuchmann GmbH & Co. KG
Rudolf-Runge-Str. 3 · 49143 Bissendorf · Deutschland / Germany
Tel. [phone] / 40 71 00 · Fax [phone]
erklärt in alleiniger Verantwortung, dass das nachfolgend genannte Produkt der Risikoklasse 1
declares under our sole responsibility that the following product(s) of Class 1 Medical Devices
Datei: Konformitätserklärung fridolin Stand: Rev. 2.0 Seite: 1
„fridolin.“Fahrgestell für den Innenbereich / chassis for indoor use
Art.-Nr. / Item-No.: 22 01 001, 22 02 000, 26 01 000, 26 02 000
Basis UDI-DI /
Basic UDI-DI: 4251040200004000220XXXX8N
den einschlägigen Bestimmungen der im folgenden aufgeführten Richtlinien und Standards entspricht:
is / are in conformity with the requirements of the below listed directives and standards:
Verordnung (EU) 2017/745 über Medizinprodukte vom 05. April 2017
Regulation (EU) 2017/745 on medical devices of 5 April 2017
DIN EN 12182:2012 Technische Hilfen für behinderte Menschen
T
echnical aids for disabled persons
DIN EN ISO 14971:2013 Medizinprodukte - Anwendung des Risikomanagements auf Medizinprodukte
Medical devices - Application of risk management to medical devices
Diese Konformitätserklärung gilt nur für Produkte mit den oben genannten Artikelnummern und
ist gültig bis zum 31.12.2023.
This declaration of conformity applies only for products with above-named Item-numbers
and is valid until 31.12.2023.
Datum / Date: 01.04.2020
Unterschrift /
Sign:
Name /
Name: Torsten Schuchmann
Funktion /
Function: Sicherheitsbeauftragter für Medizinprodukte / Safety officer for medical devices

15
8.2 Serial number / date of manufacture
The serial number, the date of manufacture and other information can be
found on the type plate, which is located on all of our products (A).
8.3 Product version
The fridolin maxi. seat pan sub-frame is available in one size and can be
complemented with diverse accessories (see Point 4).
8.4 Issue of the document
fridolin maxi. instructions for use - Change status E; issue 09.2020
8.5 Name and address of the manufacturer, specialist dealer supplying
the product
This product was manufactured by:
8. Identication.
This product has been delivered by the following specialist dealer:
Schuchmann GmbH & Co. KG
Rudolf-Runge-Str. 3 · 49143 Bissendorf · Germany
Phone [phone] / 40 71 00 · Fax [phone]
[e-mail] · www.schuchmann.de
Product name
Item number
Serial number
schuchmann.de • [e-mail] • Fon +49 (0) 5402 / 40 71 00
Rudolf-Runge-Str. 3 • 49143 Bissendorf • Germany
Barcode UDI-DI Barcode UDI-PI
UDI-DI
SN / UDI-PI
Type
Product
Max. load
Size
MD
Size
max. load
Date of manufacture
Product labelling in accordance with MDR
A

schuchmann.de GA 22 - EN_1.0