Schuchmann madita-fun mini User manual

Instructions for use.
madita-fun mini. The therapy chair for primary care.
madita-fun mini.

Many thanks.
Dear Customer
At this point we would like to thank you for placing your trust in our company and for
purchasing our product. We ask you to read through the Instructions for use carefully
prior to initial commissioning of the product, and to observe them. Please note that gui-
delines and representations in these Instructions for use may deviate from your product
due to diering equipment. We reserve the right to make technical modifications.
Important information!
Ensure that these Instructions for use remain with the product.
Your schuchmann Team

03 Contents.
1. Preparation. ................................................................................ 05
1.1 Delivery...............................................................................................................................................05
1.2 Safety measures prior to use .................................................................................................05
1.3 Safe disposal..................................................................................................................................05
1.3.1 Packaging.............................................................................................................................05
1.3.2 Product ..................................................................................................................................05
1.4 Where to store the Instructions for use.............................................................................05
2. Product description. .................................................................... 06
2.1 Material information ...................................................................................................................06
2.2 Handling/transport...................................................................................................................06
2.3 Application areas, use according to the intended purpose ................................06
2.3.1 Indications ...........................................................................................................................06
2.3.2 Contraindications............................................................................................................06
2.4 Use not in accordance with the intended purpose / warning guidelines.....07
2.5 Equipment for basic model....................................................................................................07
2.6 List of accessories.......................................................................................................................08
2.7 Product overview.........................................................................................................................08
3. Settings. ..................................................................................... 09
3.1 Seat height......................................................................................................................................09
3.2 Seat angle......................................................................................................................................09
3.3 Seat depth ......................................................................................................................................10
3.4 Back inclination.............................................................................................................................10
3.5 Back height.....................................................................................................................................10
3.6 Back with integrated upper arm guide............................................................................10
3.7 Armrests..............................................................................................................................................11
3.8 Foot support....................................................................................................................................11
3.9 Castors............................................................................................................................................... 12
4. Accessories. ................................................................................ 12
4.1 Headrest............................................................................................................................................ 12
4.2 Thorax pelotte pads with standard back .......................................................................13
4.3 Thorax pelotte pads at the back with integrated upper arm guide................ 13
4.4 Thigh guide.....................................................................................................................................14
4.5 Dysplasia seat...............................................................................................................................15
4.6 Inside leg guide ............................................................................................................................ 15
4.7 Therapy table................................................................................................................................. 16
5. Cleaning and servicing. ............................................................... 16
5.1 Cleaning and disinfecting ........................................................................................................ 16
5.1.1 Cleaning..................................................................................................................................16
5.1.2 Disinfection ........................................................................................................................... 17
5.2 Servicing ........................................................................................................................................... 17
5.3 Maintenance .................................................................................................................................. 17
5.3.1 Maintenance specifications......................................................................................... 17
5.3.2 Maintenance plan............................................................................................................18
5.4 Spare parts ..................................................................................................................................... 19
5.5 Duration of use and re-use..................................................................................................... 19

04 Contents.
6. Technical data. ............................................................................ 20
7. Guarantee. .................................................................................. 21
8. Identication. ............................................................................. 22
8.1 EU Declaration of Conformity................................................................................................ 22
8.2 Serial number / date of manufacture .............................................................................. 23
8.3 Product version............................................................................................................................. 23
8.4 Issue of the document.............................................................................................................. 23
8.5 Name and address of the manufacturer, specialist dealer supplying the
product............................................................................................................................................. 23

05 1. Preparation.
1.1 Delivery
On receiving the product, please check it for completeness, lack of faults
and any transport damage. Inspect the goods in the presence of your
forwarder. Should transport damage have occurred, please arrange for
an inventory (determination of the faults) to be made in the presence of
the forwarder. Please send a complaint in writing to the specialist dealer
responsible.
1.2 Safety measures prior to use
The correct use of the product requires a detailed and careful instruction
of the user or the accompanying person. We ask you to read through the
Instructions for use carefully prior to initial commissioning of the product,
and to observe them. It is possible that product parts that get in contact
with the skin may heat up in the sun. Cover these areas or protect the de-
vice from direct sunlight.
1.3 Safe disposal
In order to preserve and protect the environment, to prevent environmental
pollution and to improve the recycling of raw materials, please note the
disposal instructions in points 1.3.1 and 1.3.2.
1.3.1 Packaging
The packaging of the product should be kept for any future transport that
might be required. Should you have to return the product for repairs or in
case of a guarantee claim, please if possible use the original box so that
the product is optimally packaged. Otherwise, separate the packaging
materials for recycling according to their classification.
Do not leave packaging materials unattended, as they are a possible source of
danger.
1.3.2 Product
At the end of the product life cycle, recycle the raw materials used in the
product according to their nature (see material information under point 2.1).
1.4 Where to store the Instructions for use
Please store these Instructions for use carefully and ensure that these
Instructions for use remain with the product in case of re-use. Should you
lose the instructions, you can always download an updated version at
www.schuchmann.de .

06
2.1 Material information
The base frame and the individual elements are made of steel and alumi-
nium which are non-corroding and powder-coated. The covers are made
of 100% polyester and are flame resistant (according to DIN EN 1021-1+2).
2.2 Handling / transport
The therapy chair is not designed to be carried, as it is fitted with castors.
Should you have to carry the equipment due to obstacles, ensure that
all moving parts are tightened. Then position yourself next to the therapy
chair, grip it at the front and rear under the seat unit and carry it to the
required location. To transport the therapy chair, reduce all adjustments to
their most compact size (fold up foot support, set lowest seat height etc.)
2.3 Application areas, use according to the intended purpose
The madita-fun mini. therapy chair is a medical product of risk class 1
and is designed for the primary care during early childhood and for use
at home. Individually adjustable seat dimensions and supporting pelotte
pads allow a stable and upright sitting position. Any other use or use over
and above this purpose shall be considered not in accordance with the
intended purpose.
2.3.1 Indications
The madita-fun mini. therapy chair is designed for children who cannot sit
or stand freely, however whose limited torso posture does not permanently
require sitting in a seat pan. This includes impaired sitting with functional
and/or structural damage to the torso or the torso and, if applicable, the
cervical muscles (e.g. due to neurological/neuromuscular disorders, defor-
mations of the spine) with poor posture.
2.3.2 Contraindications
In general, the indication should be accompanied by a doctor/
orthopaedist. It should therefore be clarified prior to procurement whether
contraindications exist for the patient. In general, any type of pain
represents a contraindication.
2. Product description.

07 2. Product description.
2.4 Use not in accordance with the intended purpose / warning guide-
lines
• Make sure that the therapy chair is used by one user only.
• Only use the therapy chair on an even and solid surface.
• Do not use the therapy chair to transport people.
• In order to guarantee safe lifting when transporting the therapy chair,
stand at the side of the therapy chair and grasp the front and back of
the seat surface. Here all movable parts should be tightened.
• Never leave the user seated in the therapy chair without supervision.
• Correct usage of the therapy chair requires precise and careful training
of the accompanying person.
• The max. load (see Point 6) may not be exceeded.
• Do not use the therapy chair if it has defective, worn or missing parts.
• For reasons of fire safety, the therapy chair may not be placed close to
an open fire or any other strong source of heat such as electric or gas
heaters.
• Only use accessories and spare parts made by Schuchmann, otherwise
you will endanger the user.
• Only use the therapy chair if all components have been correctly
mounted and adjusted.
• Please ensure that none of the user's extremities are in the respective
area when making adjustments of any kind to minimise the risk of injury.
• Please read out the Instructions for use for users suering from a visual
or reading impairment, so that they can use the therapy chair safely.
2.5 Equipment for basic model
• Incl. armrests, foot support with pad, ergonomically-shaped
push handle, standard seat pad with cover, 4 castors (75 mm),
2 of these with parking brake
• Seat height can be adjusted with gas pressure spring assistance (800 N)
• Frame colour: Telegrey 4 (white grey)
• Adjustment possibilities: Seat angle (via gas pressure spring 250N), back
angle, seat depth and seat width, angle, height and width-adjustable
armrests, height-adjustable backrest, knee and height-adjustable foot
support

08 2. Product description.
2.6 List of accessories
• Standard back unit
• Back with integrated upper arm
guide
• Thorax pelotte pads, long
(torso guide)
• Thorax pelotte pads
• Seat pad with anatomical leg
guide
• Dysplasia seat
• Thigh guide
• Inside leg guide
• Incontinence coating in the
seat area
• Headrest (padded and
height-adjustable)
• Headrest (padded, adjustable in
height, depth and angle)
• Wooden therapy table
• Table support pad
• Harness mounting set for the seat
area / back area
• Chest-shoulder strap
• Bib
• Groin harness, T-shaped
• Pelvic harness
• 4-point pelvic harness
2.7 Product overview
The Fig. below is intended to show you the designation of the most im-
portant components as well as the terms which you will find in these Inst-
ructions for use.
Headrest
Push bar
Dysplasia seat
Thorax pelotte pads
Castor at rear with
locking device Front castor
Back
Armrests
Thigh guide
Foot bench pad

09 3. Settings.
Settings and adjustments to the product or accessories may only be made
by people who have been given the necessary instructions by a medical
product advisor. Please ensure that none of the user's extremities are in
the respective area when making adjustments of any kind to minimise the
risk of injury.
3.1 Seat height
The seat height is adjusted using a
gas pressure spring. In order to ad-
just the seat height upwards, the foot
pedal (A) on the base frame is actua-
ted. By pressing it lightly, the seat unit
slides upwards. Lowering is achieved
through pressure from above onto the
seat whilst at the same time opera-
ting the foot pedal. The gas pressure
spring serves merely to assist with ad-
justment of the height. The foot pedal
can be secured against inadvertent
operation with the spring pin (B) (loca-
ted on the inside of the foot pedal).
To do this, turn the spring pin until it
engages. If necessary, assist engage-
ment by moving the foot pedal gently.
The locking eect is cancelled by pul-
ling out the spring pin and turning it a
quarter turn.
Ensure that, during setting / adjustment of the seat height, no body parts (feet)
are trapped in the area of the setting / adjustment mechanism (between the
oor and the footrest of the therapy chair) in order to avoid injuries.
3.2 Seat angle
The release handle (C) for the seat angle adjustment is mounted on the
push handle. To adjust the seat angle,
simply activate the release handle (C).
A
C
B

10 3. Settings.
3.3 Seat depth
To adjust the seat depth, loosen the two wing
screws (A) under the seat unit. Then the seat
surface can be moved continuously forwards
or backwards.
After each adjustment, please retighten all
screw connections!
3.4 Back inclination
The back can be adjusted to the correct
angle after loosening the star knob (B) on the
right-hand side of the seat unit.
Ensure that, during setting / adjustment of the
back inclination, no body parts are trapped in
the area of the setting / adjustment mechanism
in order to avoid possible injuries.
3.5 Back height
Loosen the screws (C) at the back of the the-
rapy chair and bring the back to the required
height.
3.6 Back with integrated upper arm guide
The back with integrated upper arm guide is
equipped in the standard series with a pad,
cover and small padded wedges (approx.
3 cm). Using the padded wedges, the lower
torso area can be moulded for best possib-
le positioning of the torso. In order to chan-
ge the moulded shape, take the pad o the
back and open the zip on the rear side. Now
bring the padded wedges into the required
position, close the zip and replace the pad
on the back.
A
A
B
C

11 3. Settings.
3.7 Armrests
The armrests can be adjusted in angle,
height and width. The angle is adjus-
ted after loosening the star knob (A).
The height can be adjusted through
loosening the star knob (B).
The width adjustment takes place af-
ter loosening the two grub screws (C),
which are located on the underside of
the seat unit.
After each adjustment, please retighten
all screw connections!
3.8 Foot support
The foot support is adjustable in height
and knee angle. Loosen the screw
(D) in order to adjust the height and
bring the foot support into the requi-
red position. To adjust the knee ang-
le, release the quick-release clamp (E)
under the seat unit. Bring the knee
angle of the foot support into the re-
quired position.
After each adjustment, please retighten
all screw connections!
A
B
C
D
E
C

12 3. Settings.
3.9 Castors
The therapy chair should always be
prevented from rolling away inadver-
tently through braking of the 2 rear
castors. To do this, press the brakes (A)
down with the tip of your foot.
The brake serves merely to prevent inad-
vertent rolling away on level surfaces!
4. Accessories.
4.1 Headrest
The headrest is available in two ver-
sions. In order to adjust the height of
the first version, please loosen the 2
cylinder head screws with a hexago-
nal wrench (B) and bring the headrest
into the required position. In order to
adjust the second version in height,
depth and angle, loosen the screws
(C) and bring the headrest into the re-
quired position.
A
B
C

13 4. Accessories.
4.2 Thorax pelotte pads with standard back
The thorax pelotte pads are available
in normal and long versions (with torso
guide). Both versions are individually
adjustable in height and width. Pull the
pad cover o the rear side of the back
and loosen the two cylinder head
screws with a hexagonal wrench (A).
Bring the thorax pelotte pad into the
required position and retighten the
screws. Then fasten the pad cover
onto the rear side of the back again.
4.3 Thorax pelotte pads at the back
with integrated upper arm guide
The thorax pelotte pads are available
in normal and long versions (with torso
guide). Both versions are individually
adjustable in height and width.
Height adjustment
Open the zips on the front side of the
back pad and pull o the pad cover
on the rear side of the back. Then loo-
sen the 2 cylinder head screws with a
hexagonal wrench (B) and bring the
thorax pelotte pad to the required
height. Retighten the screws and fas-
ten the pad cover on the rear side of
the back again before closing the zips.
Width adjustment
Pull the material on the front of the
thorax pelotte pad to the side. Loo-
sen the screws underneath them (C)
and bring the thorax pelotte pads
to the required width. Retighten the
screws and cover them again with the
cover fabric.
A
B
C

14 4. Accessories.
4.4 Thigh guide
The thigh guide pads are individually
adjustable in width, depth and angle.
In order to adjust the width, the depth
and the angle, loosen the cylinder
head screws with a hexagonal wrench
(A) under the seat surface and bring
the thigh guide into the required
position.
To further adjust the depth, open the
hook and eye tapes (B) and loosen the
2 pan head screws with the hexago-
nal wrench (C). Bring the pad into the
required position and retighten the
screws. Close the hook and eye tapes
again.
After each adjustment, please retighten
all screw connections!
A
B
C

15 4. Accessories.
4.5 Dysplasia seat
The dysplasia seat permits the me-
dically necessary abduction of the
thighs. In order to adjust the leg gui-
des, loosen the cylinder head screws
with a hexagonal wrench (A) on the
underside of the seat plate. In this
way, the clutch-plate clamp and the
inside and outside leg guides can be
adjusted in angle. In order to adjust
both legs to the same angle, an ang-
le scale (B) is mounted on the upper
clamping plate from 0° to 30° per side.
Move the leg guide into the required
position. The clutch-plate clamp re-
sistance permits a visual inspection of
the adjustment, also in released con-
dition. Then tighten the screws again.
4.6 Inside leg guide
To adjust the leg guides, loosen the
cylinder head screws with a hexa-
gonal wrench (C) on the underside
of the seat plate. This loosens the
clutch-plate clamp so that the inside
leg guide can be adjusted in angle. In
order to adjust both legs to the same
angle, an angle scale is mounted on
the upper clamping plate from 0° to
30° per side. Move the leg guide into
the required position. The clutch-pla-
te clamp resistance permits a visual
inspection of the adjustment, also in
released condition. Then tighten the
screws again.
After each adjustment, please retighten all screw connections!
A
B
C

16 3. Settings. 16
4.7 Therapy table
The therapy table is inserted into the
table bracket (A) on the therapy chair
and can be adjusted in depth and
height. To fasten the therapy table,
tighten the wing screws (B) firmly. In
order to adjust the depth, loosen the
wing screws again and bring the table
into the required position. Please en-
sure that the depth adjustment tube
(C) has been inserted right to the end
into the armrest support table bracket.
Height adjustment takes place via ad-
justment of the armrests (see Point 3.7).
4. Accessories.
5. Cleaning and servicing.
A
C
B
5.1 Cleaning and disinfecting
5.1.1 Cleaning
Please clean all frame elements regularly with a spon-
ge or damp cloth; making sure that water droplets are
removed. Please clean with a mild household deter-
gent for severer dirt. Thorough drying of the cleaned
areas is important.
All fabrics that cannot be removed can be wiped with
a moist cloth. For all removable fabrics please pay at-
tention to the sewn-in care labels (such as A+ B) on the
respective element.
Please also pay attention to our general cleaning
and hygiene advice. This can be found at
www.schuchmann.de/mediathek.
7190045
A
Obermaterial/
top cloth/dessus:
100% Polyester
b

17 5. Cleaning and servicing.
5.1.2 Disinfection
Various products can be used for surface disinfection of metal and plastic
parts.
Liquid disinfectants are available as ready-to-use solutions that are spray-
ed on and evenly applied with a soft cloth. Alternatively, wipes pre-soaked
with disinfectant can be used to wipe the products over the entire surface.
In both cases, care must be taken to ensure complete wetting. Disinfection
in fully automatic disinfection systems is also possible and recommended.
The exposure times may vary and can be found in the manufacturer's ins-
tructions for the products used.
5.2 Servicing
Please carry out a visual inspection on a daily basis and regularly check
the product for cracks, breaks, missing parts and malfunctions. In case of a
defect or malfunction, please contact the specialist dealer who supplied
you with the product (see Point 8.5).
5.3 Maintenance
For reasons of user safety and to retain product liability, the product must
be subjected to maintenance by a specialist dealer at least once a year
(see Point 8.5). The maintenance work carried out must be documented in
the maintenance plan (see Point 5.3.2).
5.3.1 Maintenance specications
• Basic cleaning according to manufacturer instructions (see Point 5.1.1)
• If necessary, disinfection according to manufacturer instructions
(see Point 5.1.2)
• Damages to the frame, mounting parts and accessories (cracks, breaks,
corrosion, bent or missing parts)
• Strength of the connections (tighten loose screws, replace missing
screws)
• Functionality of the adjustment elements (screws, release lever,
foot pedal)
• Functionality of other adjustment elements (back, headrest,
pelotte pads, armrests, footrests, table and guides in the leg area)
• Functionality of the gas pressure springs (if necessary readjustment of
the bowden cables)
• Functionality of the safety elements (anti-tilt)
• Correct mounting of the seat unit
• Functionality of brakes
• Functionality of the rollers (concentricity, smooth running)

18 5. Cleaning and servicing.
• Check the harness for damage (clamping device, closures, seams)
• Check the pads and covers for damage
• Legibility of the type label
• Final complete functional check of the aid
• Check that all mounting parts and associated accessories are correctly
fastened
5.3.2 Maintenance plan
Maintenance specifications of the manufacturer (see Point 5.3.1) were
carried out:
Date Company Name signature
Any defects or damage found must be repaired by the specialist dealer or the
manufacturer before reuse.

19 5. Cleaning and maintaining.
5.4 Spare parts
Use only original accessories and original spare parts from Schuchmann,
as otherwise the safety of the user is endangered and the warranty
expires.
To order spare parts, please contact the supplying specialist dealer (see
point 8.5) stating the serial number of the product. Necessary spare parts
and accessories must only be installed by trained personnel.
5.5 Duration of use and re-use
The expected duration of use of our product, dependent on the usage in-
tensity and amount of re-use, totals up to "8" years if the usage takes place
in accordance with the information in these Instructions for use. It may be
possible to use the product over and above this time period if it is in a
safe condition. The expected duration of use does not refer to wear parts,
such as for example wheels, gas pressure springs,... . The maintenance and
evaluation of the condition, and if applicable the potential for re-use, must
be decided by the specialist dealer.
The product is suited for re-use. Prior to forwarding, please follow the clea-
ning and disinfection instructions stated in Point 5.1. Accompanying docu-
ments such as these Instructions for use are part of the product and must
be passed on to the new user. No disassembly is required prior to re-use. In
the case of storage, it is recommended to fold the product to the smallest
dimension to save space.
Should a serious incident occur during the service life of the product despite
being used as intended
, this must be reported immediately to the manufactu-
rer and the competent authority.

20
C
BA
E
D
FG
6. Technical data.
Dimensions
Dimensions
ASeat depth 12 - 19 cm
BSeat width 14 - 22 cm
CBack height with short back 28 - 33 cm
CBack height with long back 30 - 35 cm
DSeat height 25 - 62 cm
ELower leg length 12 - 22 cm
FTotal width 52 cm
GLength of base frame 58 cm
Seat angle (-)5° - 37° / 0° - 42°
Back angle (-)5° - 25°
max. load 20 kg
Weight 16 kg