Schuchmann MALTE User manual

MALTE
the compact and versatile posterior-walker
Instructions for use

Dear Customer,
At this point we would like to thank you for placing your trust in our company and
for purchasing our product.
We ask you to read through the Instructions for use carefully prior to initial com-
missioning of the product, and to observe them. Please note that guidelines and
representations in these Instructions for use may deviate from your product due to
differing equipment.
We reserve the right to make technical modications.
Important information!
Ensure that these Instructions for use remain with the product.
Your Schuchmann Team

Contents Page
1. Preparation of the posterior-walker for use
1.1 Transport....................................................................................................2
1.2 Safety measures prior to use.....................................................................2
1.3 Safe disposal of the packaging material.................................................... 2
1.4 Where to keep the instructions for use...................................................... 2
2. Product description
2.1 General information................................................................................... 2
2.2 Areas of application, use according to the intended purpose.................... 3
2.3 Use not in accordance with the intended purpose / warning guidelines.... 3
2.4 Equipment for basic model........................................................................ 4
2.5 List of accessories..................................................................................... 4
2.6 Product overview....................................................................................... 4
3. Settings
3.1 Folding the frame up/down........................................................................ 5
3.2 Handles......................................................................................................5
3.2.1 Handle height adjustment ....................................................................5
3.2.2 Setting the handles width......................................................................6
3.3 Direction locks........................................................................................... 6
3.4 Backwards stop......................................................................................... 6
3.5 Friction brake (optional)............................................................................. 7
3.6 Bench (optional)........................................................................................ 8
3.7 Bar (optional)............................................................................................. 8
3.8 Combined pelvis and buttocks pelotte pads (optional).............................. 9
3.9 Lower armrests (optional)........................................................................ 10
3.10 Grip /grip ball for lower armrests............................................................. 10
4. Repairs and cleaning
4.1 Cleaning...................................................................................................11
4.2 Repairs.....................................................................................................11
4.3 Spare parts...............................................................................................11
4.4 Duration of use and re-use ..................................................................... 11
5. Technical data................................................................................................ 12
6. Guarantee....................................................................................................... 12
7. Identication
7.1 EC declaration of conformity....................................................................13
7.2 Serial number / date of manufacture ........................................................14
7.3 Product version........................................................................................14
7.4 Issue of the document............................................................................. 14
7.5 Name and address of the manufacturer, specialist dealer
supplying the product...............................................................................14
1

2
1. Preparation of the posterior-walker for use
1.1 Transport
On receiving the product, please check it for completeness, lack of faults and check
it for any transport damage.
Inspect the goods in the presence of your forwarder
Should transport damage have occurred, please cause an inventory (determination
of the faults) to be made in the presence of the forwarder. Please send a complaint
in writing to the specialist dealer responsible.
1.2 Safety measures prior to use
Correct usage of the posterior-walker requires precise and careful induction of the
accompanying person. We ask you to read through the instructions for use carefully
prior to initial commissioning of the posterior walker, and to observe them.
1.3 Safe disposal of the packaging material
The product packaging should be stored in case the product needs to be transpor-
ted again. Should you have to return the product for repairs or in case of a gua-
rantee claim, please if possible use the original box so that the product is optimally
packaged.
Otherwise, please assist in disposing of the packaging material professionally in or-
der to promote the recycling of resources. For this reason, separate the packaging
materials for recycling according to their classication.
Do not leave packaging materials unattended, as they are a possible source of
danger.
1.4 Where to keep the instructions for use
Please store these instructions for use carefully and ensure that these Instructions
for use remain with the product in case of re-use.
2. Product description
2.1 Material information
The base frame and the individual elements are made of aluminium which is non-
corroding and powder-coated. All body supports and lower arm rests are made of
PU and the seat is padded and covered. The cover is made of 100% polyester.

3
CAUTION!
2.3 Use not in accordance with the intended purpose / warning guidelines
• Correct usage of the product requires precise and careful training of the
accompanying person.
• The product may not be used without supervision.
• The posterior-walker may only be used indoors on a solid, even
ground. Please use the MALTE Outdoor
for outdoor areas.
• The max. height adjustment is specied by a marking -
no settings may be made beyond this range.
• Please observe point 5 "Technical data" in these instructions for use for the
maximum permitted patient weight.
• After all adjustments, rmly re-tighten the screw connections you have
loosened!
• Hanging on heavy bags or other items can negatively inuence the
stability.
• Only use accessories and spare parts made by Schuchmann, otherwise you
will endanger the child.
2.2 Application areas, use according to the intended purpose
Indications
The posterior-walker MALTE has been designed for children and teenagers to com-
pensate for reduced strength or ability of the lower extremities using force/support
from the upper extremities (possibly also the torso).
The aim is to learn active walking or independent movement, expansion of a re-
stricted radius and compensation of unsteady walking.
The posterior-walker MALTE is pulled behind the head. This increases backward
stability and offers optimum freedom of leg movement due to the abducted frame
design.
Contraindications
In general, the indications for walking training should be approved by a doctor or
orthopedist. It should therefore be claried prior to procurement whether contraindi-
cations exist for the patient. In general, any type of pain represents a contraindica-
tion. Walking training should not be provided without establishing prior to use whe-
ther the patient has an abnormal foot position, which requires medical attention.

2.4 Equipment for basic model
• Light and folding aluminium frame (Size 0 does not fold down)
• Individually height and width adjustable handles
• PU rear wheels with integrated backwards stop in the hub, which can be
switched off
• PU guide wheels with direction locks
2.5 List of accessories
• Lower armrests with handles
• Lower armrests with grip balls
• Bar
• End stops for handles
• Combined pelvis and buttocks
pelotte pads
• Back pelotte pad with chest strap
• Folding bench
• Parking handbrake
• Friction brake
• Tip protector
• Storage basket
• Deector set
2.6 Product overview
The Fig. below is intended to show you the designation of the most important com-
ponents as well as the terms which you will nd in these Instructions for use.
Light and folding
aluminium frame (Size 0
does not fold down)
Combined pelvis and buttocks pelotte pads
PU guide wheels with direction locks
PU rear wheels with integrated backwards
stop in the hub, which can be switched off
Lower armrests with handles
Bench
Hinge
4

5
3. Settings
3.1 Folding the frame up/down
The frame can be folded for easy transportation
or better storage of the posterior-walker using
hinges (A).
Stand or crouch down behind the posterior-wal-
ker to fold the frame down. Pull both releases (B)
at the same time and press the frame down (C).
To unfold, pull both releases (B) and set the
frame up again. The posterior-walker is ready to
use again as soon as both hinges have locked in
with an audible click.
A
B
CLICK
CLICK
It is essential that hinges lock back in
when unfolding!
C
3.2 Handles
The handles can be individually be adjusted in
height and width for adjustment to individual body
size.
3.2.1 Handle height adjustment
To adjust the height, please loosen the star hand-
les (D), bring the handles into the required positi-
on and then re-tighten the star handles. A gauge
(E) permits precise height adjustment of the
handles. Make sure that the handle is not pulled
out of the handle mount beyond the STOP mar-
king (F) as sufcient clamping can no longer be
guaranteed in this case. The height can also be
changed by using the width adjustment (see 3.2.2).
The handles may not be pulled out of the handle mount beyond the
STOP mark!
D
E
F

6
3.2.2 Setting the handles width
To adjust the width, please loosen the cylinder
head screw with inner hexagon (A), bring the
handles into the required position and then re-
tighten the cylinder head screw with inner hexa-
gon.
As previously mentioned in point 3.2.1, the hand-
le height can also be changed by adjusting the
width (B).
After each adjustment, please re-tigh-
ten all screw connections!
A
B
3.3 Direction locks
It is possible to drive straight on by locking the
guide wheels.
To release the guide wheels lock, pull the direc-
tion lock (C) gently upwards and turn it a quarter
turn to the left or right. The guide wheels can now
move freely and allow independent steering.
Pull the direction lock (C) gently upwards and
turn it a quarter turn to the left or right again to
apply the guide wheels lock. The direction locks
click back in as soon as the guide wheels are ali-
gned straight.
C

7
3.4 Backwards stop
Due to the fact that children sometimes instinc-
tively want to let themselves fall backwards,
MALTE is equipped with backward locks and
therefore gives optimum support.
The backwards locks are integrated in the rear
wheels and can be activated or deactivated de-
pending on the situation.
Activating the backwards stop
Turn the locking bar by a half turn upwards and
move the wheel backwards until the locking bar
audibly clicks in (A).
Deactivating the backwards stop
Turn the locking bar a half turn downwards until it
is held in place by the catch (B).
A
B
3.5 Friction brake (optional)
The function of the friction brake is to slowly redu-
ce the speed of the rear wheel rollover.
By turning screw C (loosen lock nut D before-
hand) in and out, the pressure the friction brake
has on the wheel can be changed and therefore
the wheel rolling speed.
After each adjustment, please re-tigh-
ten the lock nut!
D
C

8
3.6 Bench (optional)
The bench is padded and covered. If the bench is
not required, it can be folded up at the back (B) to
provide more space when walking.
Simply lift the bench gently and fold it backwards.
Simply fold it back down to the use the bench
again.
Not possible for Size 0. Please pay attention to the max. load (see
point 5).
B
3.7 Bar (optional)
The bar serves as a horizontal connection bet-
ween the handles and supports an upright wal-
king position. It can be adjusted in depth and
height and can be swung away.
Depth adjustment
Gently loosen the screws on both clamping de-
vices (C) and bring the bar into the required posi-
tion then re-tighten the screws.
Height adjustment
The handles are used to set the height (see point 3.2.1).
Swinging the bar away
Pull the locking bolts (D) out and swing the bar away to the side.
After each adjustment, please re-tighten all screw connections!
C
D

9
3.8 Combined pelvis and buttocks pelotte pads (optional)
The combined pelvis and buttocks pelotte pad is
padded with PU and helps the user straighten up
when walking. It can be adjusted in height, depth,
width and angle and can also be swung away to
the back.
Height adjustment
The height of the combined pelvis and buttocks
pelotte pad can be adjusted with the handles (A -
also refer to point 3.2.1). The height can also be
adjusted by loosening the screws (B).
Depth adjustment
Please loosen the 2 grub screws (C) and bring
the combined pelvis and buttocks pelotte pads
into the required position.
Width adjustment
The pelvis pelotte pad on the combined pelvis
and buttocks pelotte pad can be adjusted in width
after loosening the screw connections (D).
Adjustment of the angle
Loosen the cylinder head screw (E) to adjust the
angle of the combined pelvis and buttocks pelotte
pad.
Swinging away
If the combined pelvis and buttocks pelotte pad
is not required, it can be simply swung away to
the back (F).
A
B
C
D
D
E
After each adjustment, please re-tighten all screw connections!
F

3.9 Lower armrests (optional)
The lower armrests can be equipped with a hand-
le or grip ball. They can be adjusted in depth,
height, angle and inclination.
Depth adjustment
Loosen the cylinder head screw with inner he-
xagon (A) beneath the lower armrest. Now you
can slide it onto the pipe (B) and bring it into the
required position.
Height adjustment
The handles are used to set the height (see
points 3.2.1 + 3.2.2).
Adjustment of the angle
The angle (C) is set using a locking hinge. Loo-
sen the cylinder head screw with inner hexagon
(A) beneath the lower armrest and bring the lo-
wer armrest into the required position.
Angle adjustment
Loosen the cylinder head screw with inner hexa-
gon (A) beneath the lower armrest to set the in-
clination (D) and bring the lower armrest into the
required position.
B
C
D
A
E
10
After each adjustment, please re-tigh-
ten all screw connections! G
3.10 Handle / grip ball for lower armrests
Please loosen the hexagon socket screws (E)
and bring the grip (F) or grip ball (G) into the re-
quired position.
F

11
4.3 Spare parts
Should you wish to order spare parts, please contact the specialist dealer who sup-
plied you with the posterior-walker stating the serial number (see Point 7.5).
4.4 Duration of use and re-use
The expected duration of use of our product, dependent on the usage intensity and
amount of re-use, totals up to "8" years, if the usage takes place in accordance with
the information in these instructions for use. It may be possible to use the product
over and above this time period if it is in a safe condition. The expected duration
of use does not refer to wear parts, such as for example wheels, parking brake,
hinges.....
The maintenance and evaluation of the condition, and if applicable the potential for
re-use must be decided by the specialist trader.
The posterior-walker is suitable for re-use. Prior to forwarding on, please follow
the cleaning instructions in Chapter 4.1. Accompanying documents such as these
instructions for use are part of the product, and must be transferred to the new user.
4. Repairs and cleaning
4.1 Cleaning
All frame elements and surfaces can be cleaned with a sponge or moist cloth using
normal antibacterial detergents.
Do not use aggressive cleaning agents
such as solvents, hard brushes etc.
4.2 Repairs
Please carry out a daily visual inspection and check the posterior-walker regularly
for cracks, breaks, missing parts and malfunctions. In case of a defect or malfunc-
tion, please contact the specialist dealer who supplied you with the product (see
Point 7.5).

12
6. Guarantee
The two-year statutory guarantee period shall apply for all products. This guarantee
period shall begin with the delivery or handover of the goods. Should a veriable
material or manufacturing fault occur within this time period, we shall, after carriage
paid return to us, view the indicated damage and, if applicable, either repair or de-
liver a new product at our discretion.
5. Technical data
Dimensions - basic model
Size 0 MINI
Frame cannot
be folded up
Size 1 Size 2 Size 3 Size 4
A1 Handle height 29 - 53 cm 34 - 58 cm 51 - 75 cm 68 - 94 cm 87 - 113 cm
A2 Height of lower armrests - 46 - 70 cm 63 - 87 cm 79 - 103 cm 98 - 124 cm
BHandle spacing 22 - 36 cm 22 - 36 cm 30 - 44 cm 38 - 52 cm 43 - 57 cm
CSeat height - 33 cm 45 cm 60 cm 70 cm
DTotal width 52 cm 51 cm 61 cm 68 cm 75 cm
ETotal length 58 cm 58 cm 70 cm 77 cm 87 cm
Frame height (folded) 37 cm 25 cm 32 cm 34 cm 37 cm
Transport dimensions
(L x W x H)
58 x 52 x
37 cm
58 x 51 x
25 cm
70 x 61 x
32 cm
77 x 68 x
34 cm
87 x 75 x
37 cm
Max. load 20 kg 30 kg 50 kg 75 kg 100 kg
Weight 3.9 kg 7.1 kg 8.3 kg 8.5 kg 10.2 kg
C
E
A1
A2
B
D

13
7.Identication
7.1 EC declaration of conformity
Schuchmann GmbH & Co.KG
Dütestr. 3
D-49205 Hasbergen
Tel.: [phone] / 909 - 0
Fax: [phone] / 909 - 109
declares on their sole responsibility that the product named below is classi-
edasproductclass1
"MALTE" - the compact and versatile posterior-walker
Art. No.:35 00 100 (Size 0 Mini)75 01 000 (Size 1) 75 02 000 (Size 2)
75 03 000 (Size 3) 75 04 000 (Size 4)
The relevant regulations of the regulations and guidelines listed below ac-
cord with:
• EC Directive 93/42/EEC on medical products from 14th June 1993
• DIN EN 12182:1999 Technical aids for the disabled
• EN ISO 14971 Medical products - Application of risk management
on medical products
• DIN EN ISO 11199-3:2005 Walking aids manipulated by both arms - Require-
ments and test methods - Part 3: Walking tables
This declaration of conformity applies only for products with the article
numbers stated above.
Date 23.10.2013
Signature ________________________
Name Torsten Schuchmann
Function Safety Representative for Medical Products

14
This product has been delivered by the following specialist dealer:
7.3 Product version
The MALTE posterior-walker is available in ve sizes (12" - 26") and can be supple-
mented through a diverse range of accessories (see Point 4).
7.4 Issue of the document
Instructions for use Posterior-Walker MALTE - Change status B; Issue 08.2014
7.5 Name and address of the manufacturer, specialist dealer
supplying the product
This product was manufactured by:
Schuchmann GmbH & Co. KG
Dütestraße 3 · 49205 Hasbergen
Tel. [phone] · Fax [phone]
[email protected] · www.schuchmann-reha.de
7.2 Serial number / production date
You can nd the serial number, the production date as well as further details on the
type label that is located on each of your products.
Schuchmann GmbH & Co. KG
Dütestr. 3 · 49205 Hasbergen · Germany
www.schuchmann-reha.de · [email protected] · Fon +49 (0) 5405 / 909 - 0
Typ
Product
SN
Max. load
Size
Product name
Article number
Serial number
Size
Max. load
Production date