Sealey AP6310 User manual

10 DRAWER MOBILE WORKSTATION WITH
BACKBOARD
MODEL NO: AP6310
Thank you for purchasing a Sealey product. Manufactured to a high standard, this product will, if used according to these
instructions, and properly maintained, give you years of trouble free performance.
IMPORTANT: PLEASE READ THESE INSTRUCTIONS CAREFULLY. NOTE THE SAFE OPERATIONAL REQUIREMENTS, WARNINGS & CAUTIONS. USE
THE PRODUCT CORRECTLYAND WITH CARE FOR THE PURPOSE FOR WHICH IT IS INTENDED. FAILURE TO DO SO MAY CAUSE DAMAGE AND/OR
PERSONAL INJURYAND WILL INVALIDATE THE WARRANTY. KEEP THESE INSTRUCTIONS SAFE FOR FUTURE USE.
1. SAFETY
WARNING! Ensure Health & Safety, local authority, and general workshop practice regulations are adhered to when using these
units.
9Locate the units in a suitable work area.
9Keep the work area clean, uncluttered and ensure there is adequate lighting.
WARNING! Use the mobile workstation on level and solid ground, preferably concrete.
9Keep the units clean and tidy in accordance with good workshop practice.
9Keep children and unauthorised persons away from the work area.
8DO NOT use these units for any purpose other than that for which they are designed.
8DO NOT use the units outdoors.
8DO NOT place the units in a damp or wet location or an area where there is condensation.
8DO NOT clean the units with any solvents which may damage the surfaces or the protective coating.
8DO NOT move the units with the drawers out. To avoid tipping, open one drawer at a time and close and secure all drawers whilst
moving the mobile workstation.
8DO NOT step on the drawers.
8DO NOT overload the drawers, weight limit per drawer is 40kg.
2. INTRODUCTION
20mm thick wooden worktop. 10 Drawers with a 40kg capacity each. Each drawer features aluminium pull handles and non-slip liners. Six
large castor wheels (four xed and two swivel) that include brakes. Supplied with a pegboard back panel that is ideal for hanging tools and
compatible with TTS range of hooks, plus 14 storage bins in two sizes. There is a cabinet for extra storage and a heavy-duty side handle for
comfort and control when manoeuvring. Supplied with locks and two keys for the cabinet and draws. Some simple assembly required.
3. SPECIFICATION
Overall Size Inc Handle (W x D x H): .................1690 x 490 x 1432mm
Worktop Size (W x D x H): .....................................1600 x 460 x 20mm
Small Drawer (x6): ...................................................505 x 415 x 80mm
Medium Drawer (x4):..............................................505 x 415 x 143mm
Cabinet (W x D x H): ..............................................538 x 480 x 650mm
Top Shelf (W x D x H): ...........................................1600 x 200 x 43mm
4. ASSEMBLY
4.1. Remove outer packaging and dissemble the wooden transport. (g.1).Fixings located in the draw.
g.1
AP6310 Issue 1 28/06/21
Original Language Version
© Jack Sealey Limited
Refer to
instructions Wear protective gloves

4.2. Install the pegboard (g.2).Fold upwards and x in position.
4.3. Install the top tray bracket (g.3).
g.2
g.3
Original Language Version
© Jack Sealey Limited AP6310 Issue 1 28/06/21

4.4. Install the top tray (g.4).
4.5. Install the side handle over the swivelling castors. (g.5).
g.4
g.5
Sealey Group, Kempson Way, Suffolk Business Park, Bury St Edmunds, Suffolk. IP32 7AR
01284 757500 01284 703534 [e-mail] www.sealey.co.uk
Note: It is our policy to continually improve products and as such we reserve the right to alter data, specifications and component parts without prior
notice.
Important: No Liability is accepted for incorrect use of this product.
Warranty: Guarantee is 12 months from purchase date, proof of which is required for any claim.
ENVIRONMENT PROTECTION
Recycle unwanted materials instead of disposing of them as waste. All tools, accessories and packaging should be sorted, taken to
a recycling centre and disposed of in a manner which is compatible with the environment. When the product becomes completely
unserviceable and requires disposal, drain any fluids (if applicable) into approved containers and dispose of the product and fluids
according to local regulations.
Original Language Version
© Jack Sealey Limited AP6310 Issue 1 28/06/21