Siemens FDM223-Ex User manual

FDM223-Ex
Manual call point
Technical Manual
A6V10349616_i_en_
--
Building Technologies
2019-01-18 Control Products and Systems

Imprint
2 | 42
Building Technologies
A6V1
0349616_i_en_
--
Fire Safety
2019
-
01
-
18
Imprint
Technical specifications and availability subject to change without notice.
Transmittal, reproduction, dissemination and/or editing of this document as well as
utilization of its contents and communication thereof to others without express
authorization are prohibited. Offenders will be held liable for payment of damages.
All rights created by patent grant or registration of a utility model or design patent
are reserved.
Issued by:
Siemens Switzerland Ltd.
Building Technologies Division
International Headquarters
Theilerstrasse 1a
CH-6300 Zug
Tel. [phone]
www.siemens.com/buildingtechnologies
Edition: 2019-01-18
Document ID: A6V10349616_i_en_--
© Siemens Switzerland Ltd, 2012

3 | 42
Building Technologies
A6V10349616
_i_en_
--
Fire Safety
2019
-
01
-
18
Table of contents
1 About this document.............................................................................5
1.1 Applicable documents................................................................................. 9
1.2 Download center......................................................................................... 9
1.3 Technical terms, abbreviations, and formula symbols.................................10
1.4 Revision history.........................................................................................11
2 Safety...............................................................................................12
2.1 Safety instructions.....................................................................................12
2.2 Safety regulations for the method of operation...........................................14
2.3 Standards and directives complied with......................................................16
2.4 Release Notes...........................................................................................16
3 Structure and function.........................................................................17
3.1 Overview...................................................................................................17
3.1.1 Details for ordering......................................................................17
3.1.2 Reference to technical manual....................................................17
3.1.3 Product version ES.....................................................................18
3.2 Setup.........................................................................................................19
3.2.1 Manual call point FDM223-Ex .....................................................19
3.2.2 Connections................................................................................20
3.2.3 Indication elements.....................................................................20
3.3 Function ....................................................................................................21
3.3.1 Danger levels..............................................................................21
3.3.2 Internal alarm indicator................................................................21
3.3.3 Test mode...................................................................................21
3.3.4 Diagnosis levels..........................................................................21
3.3.5 Behavior in degraded mode ........................................................22
3.3.6 Line tester...................................................................................22
3.4 Accessories...............................................................................................23
3.4.1 Glass insert DMZ1196-AC ..........................................................23
3.4.2 Protective cover DMZ1197-AC....................................................23
3.4.3 M20 x 1.5 metal cable gland........................................................23
3.4.4 Seal DMZ1197-AD......................................................................24
3.4.5 Line adapter (Ex) FDCL221-Ex...................................................24
4 Planning............................................................................................25
4.1 Compatibility..............................................................................................25
4.2 Fields of application...................................................................................25
4.3 Mounting site.............................................................................................25
5 Mounting/Installation...........................................................................26
5.1 Preparation................................................................................................26
5.2 Mounting ...................................................................................................27
5.3 Electrical connection..................................................................................28
5.4 Installing the protective cover.....................................................................31

Building Technologies
A6V10349616_i_en_
--
Fire Safety
2019
-
01
-
18
4 | 42
6 Commissioning...................................................................................32
6.1 Localization and device testing ..................................................................32
6.2 Checking function......................................................................................33
7 Maintenance / troubleshooting..............................................................34
7.1 Resetting after an alarm.............................................................................34
7.2 Status query..............................................................................................34
7.3 Performance check....................................................................................34
7.4 Replacing the glass insert..........................................................................35
8 Specifications.....................................................................................36
8.1 Technical data...........................................................................................36
8.2 Dimensions ...............................................................................................38
8.3 Master gauge for recesses.........................................................................38
8.4 Environmental compatibility and disposal...................................................39
Glossary .....................................................................................................40
Index .........................................................................................................41

About this document
Applicable documents
1
5 |
42
Building Technologies
A6V10349616_i_en_
--
Fire Safety
2019
-
01
-
18
1 About this document
Retention and availability
NOTICE
Missing information
Damage due to misuse
●This document must be available in a usable format throughout the entire life
cycle of the product. Keep the document for reference and ensure that it can
be accessed by target groups.
Should you require another copy of this document, please contact the Customer
Support Center, phone [phone].
Goal and purpose
This document contains all information on the manual call point FDM223-Ex.
Following the instructions consistently will ensure that the product can be used
safely and without any problems.
This document is aimed at users who are planning, installing, commissioning,
operating, and maintaining a fire detection installation FS20/FS720 or SIGMASYS
with a line card (FDnet/C-NET) with addressed detector lines within the scope of
the ATEX directive or IECEx.
General knowledge about the structure and function of fire detection installations
FS20/FS720 is required in order to understand the information.
WARNING
Document A6V10324618 is an integral part of this document. You must observe
the information in both this document and document A6V10324618!
Before installing the device, you must make yourself familiar with the content of
document A6V10324618 'Planning, Mounting/Installation, Commissioning,
Maintenance of fire detection installations with addressed detector lines in
potentially explosive atmospheres'. You can download the current version of the
document from the Internet, at the address http://siemens.com/bt/download.

About this document
Applicable documents
1
6 | 42
Building Technologies
A6V10349616_i_en_
--
Fire Safety
2019
-
01
-
18
Device labeling
Device type FDM223-Ex
Manufacturer Siemens Switzerland Ltd.
Building Technologies Division
International Headquarters
Theilerstrasse 1a
CH-6300 Zug
Tel. [phone]
www.siemens.com/buildingtechnologies
Year of construction 2014 onwards
IECEx scheme Ex ia IIC T4 Ga, Ta = -35…70 °C
Ex ia IIIB T135 °C Da , Ta = -35…70 °C
Directive 2014/34/EU
(ATEX directive) II 1 G Ex ia IIC T4 Ga, Ta = -35…70 °C II 1 D Ex ia IIIB T135 °C Da, Ta = -35…70 °C
When used in atmospheres at risk of gas explosion:
The manual call point FDM223-Ex must be protected against electrostatic
charging, along with all its accessory parts.
Intended use
The manual call point FDM223-Ex may only be used as follows:
●On an FDnet-Ex/C-NET-Ex detector line in a fire detection installation
FS20/FS720
●On the detector line the manual call point FDM223-Ex must be installed
downstream of a line adapter (Ex) approved in accordance with national and
international regulations. For the FDnet-Ex/C-NET-Ex detector line, this is line
adapter (Ex) FDCL221-Ex.
Please note the documents listed in the chapter '
Applicable documents [
➙
9
]
'.

About this document
Applicable documents
1
7 |
42
Building Technologies
A6V10349616_i_en_
--
Fire Safety
2019
-
01
-
18
Target groups
The information in this document is intended for the following target groups:
Target group Activity Qualification
Product Manager ●Is responsible for information
passing between the manufacturer
and regional company.
●Coordinates the flow of information
between the individual groups of
people involved in a project.
●Has obtained suitable specialist
training for the function and for the
products.
●Has attended the training courses
for Product Managers.
Project Manager ●Coordinates the deployment of all
persons and resources involved in
the project according to schedule.
●Provides the information required to
run the project.
●Has obtained suitable specialist
training for the function and for the
products.
●Has attended the training courses
for Project Managers.
Project engineer ●Sets parameters for product
depending on specific national
and/or customer requirements.
●Checks operability and approves
the product for commissioning at the
place of installation.
●Is responsible for troubleshooting.
●Has obtained suitable specialist
training for the function and for the
products.
●Has attended the training courses
for Product Engineer.
Installation personnel ●Assembles and installs the product
components at the place of
installation.
●Carries out a performance check
following installation.
●Has received specialist training in
the area of building installation
technology or electrical installations.
Maintenance personnel ●Carries out all maintenance work.
●Checks that the products are in
perfect working order.
●Searches for and corrects
malfunctions.
●Has obtained suitable specialist
training for the function and for the
products.
There are various tasks that may only be performed by qualified persons in
accordance with the national implementation of Directive 2009/104/EC (e.g. in
Germany: Section 2 (7) of the Ordinance on Industrial Safety and Health
(BetrSichV)).
Source language and reference document
●The source/original language of this document is German (de).
●The reference version of this document is the international version in English.
The international version is not localized.

About this document
Applicable documents
1
8 | 42
Building Technologies
A6V10349616_i_en_
--
Fire Safety
2019
-
01
-
18
Document identification
The document ID is structured as follows:
ID code Examples
ID_ModificationIndex_Language_COUNTRY
-- = multilingual or international A6V10215123_a_de_DE A6V10215123_a_en_--
A6V10315123_a_--_--
Date format
The date format in the document corresponds to the recommendation of
international standard ISO 8601 (format YYYY-MM-DD).
Conventions for text marking
Markups
Special markups are shown in this document as follows:
⊳Requirement for a behavior instruction
1.
2. Behavior instruction with at least two operation sequences
– Version, option, or detailed information for a behavior instruction
⇨Intermediate result of a behavior instruction
⇨End result of a behavior instruction
●Numbered lists and behavior instructions with an operation
sequence
[➙X] Reference to a page number
'Text' Quotation, reproduced identically
<Key> Identification of keys
>Relation sign and for identification between steps in a sequence,
e.g., 'Menu bar' > 'Help' > 'Help topics'
↑Text Identification of a glossary entry
Supplementary information and tips
The 'i' symbol identifies supplementary information and tips
for an easier way of
working.

About this document
Applicable documents
1
9 |
42
Building Technologies
A6V10349616_i_en_
--
Fire Safety
2019
-
01
-
18
1.1 Applicable documents
Document ID
Title
008250 Technical Manual Line tester FDUL221
008331 List of compatibility (for 'Sinteso™' product line)
009052 FS20 Fire detection system - Commissioning, Maintenance,
Troubleshooting
A6V10210416 FS720 Fire detection system - Commissioning, Maintenance,
Troubleshooting
A6V10229261 List of compatibility (for 'Cerberus™ PRO' product line)
A6V10260486 Installation Alarm indicators, adapter frame, surface-mounted
housing, indicator housing, incl. washer FDAI92EX, FDAI93EX,
AI330, DCA1191, DJZ1193
A6V10324618 Planning, Mounting/Installation, Commissioning, Maintenance
of fire detection installations with addressed detector lines in
potentially explosive atmospheres
A6V10333771 Technical Manual Line adapter (Ex) FDCL221-Ex
A6V10349347 Data sheet Manual call point FDM223-Ex
A6V10349619 Installation Manual call point FDM223-Ex
Please also observe the documentation for your fire detection system.
1.2 Download center
You can download various types of documents, such as data sheets, installation
instructions, and license texts via the following Internet address:
https://siemens.com/bt/download
lEnter the document ID in the search field.
You will also find information about search variants and links to mobile
applications (apps) for various systems on the home page.

About this document
Techni
cal terms, abbreviations, and formula symbols
1
10 | 42
Building Technologies
A6V10349616_i_en_
--
Fire Safety
2019
-
01
-
18
1.3 Technical terms, abbreviations, and formula
symbols
Term Explanation
AI Alarm indicator
ASA Advanced Signal Analysis
BetrSichV Betriebssicherheitsverordnung, national implementation in
the Federal Republic of Germany of Directive 2009/104/EC
on the use of work equipment
ES Product version
FDnet/C-NET Addressed detector line
FDnet-Ex/C-NET-Ex Addressed detector line in a potentially explosive
atmosphere downstream of a line adapter (Ex) FDCL221-
Ex
LED Light-emitting diode
Symbol
Meaning
C
0 Maximum external capacity
C
C Maximum permissible cable capacitance
C
i Maximum internal capacity
I
0 Maximum output current
I
i Maximum input current
L
0 Maximum external inductivity
L
C Maximum permissible cable inductance
L
i Maximum internal inductivity
P
0 Maximum output power
P
i Maximum input power
R
C Resistance of the connection cable
T
aAmbient temperature in a potentially explosive atmosphere
U
iMaximum input voltage
U
m Maximum r.m.s. value of the alternating voltage.
Maximum permissible voltage of an associated item of
electrical equipment without canceling the energy limitation.
U
0 Maximum output voltage
You will find more technical terms in the glossary at the end of this document.
The symbols used correspond to the EN
60079
-
11 standard.

About this document
Revision history
1
11 |
42
Building Technologies
A6V10349616_i_en_
--
Fire Safety
2019
-
01
-
18
1.4 Revision history
The reference document's version applies to all languages into which the reference
document is translated.
The first edition of a language version or a country variant may, for example, be
version 'd' instead of 'a' if the reference document is already this version.
The table below shows this document's revision history:
Version Edition date Brief description
i 2019-01-18 ●Directive changed: now 2014/34/EU
●'Technical data' chapter: Approvals removed
●'Replacing the glass insert' chapter revised
●Graphics with interior views of the manual call point door amended throughout
the entire document
●Cable grippers (2-hole) removed from accessories available to order
●Editorial changes
h 2015-02-02 Table listing published language versions corrected; IP protection category
amended in 'Technical data' chapter; seal DMZ1197-AD added in 'Accessories'
chapter; editorial changes
g 2014-07-22 Editorial changes
f 2014-05-23 Editorial changes; 'Download center' chapter added; reference to data sheet
added; adhesive label 'Avoid electrostatic charging' removed; connection terminal
in the housing and as accessory part removed
e 2013-07-31 Editorial changes
d 2013-04-30 Seal DMZ1197-AD and cable gripper (1-hole) removed; editorial changes.
c 2012-08-31 Notice of danger due to electrostatic charging changed.
b 2012-08-24 Editorial changes
a 2012-06-15 First edition

Safety
Safety instructions
2
12 | 42
Building Technologies
A6V10349616_i_en_
--
Fire Safety
2019
-
01
-
18
2 Safety
WARNING
Contradictory safety
instructions
Risk of explosion caused by disregarding safety instructions
●Should safety instructions relating to explosion protection contradict other
safety instructions, please observe the safety instructions relating to explosion
protection.
2.1 Safety instructions
The safety notices must be observed in order to protect people and property.
The safety notices in this document contain the following elements:
●Symbol for danger
●Signal word
●Nature and origin of the danger
●Consequences if the danger occurs
●Measures or prohibitions for danger avoidance
Symbol for danger
This is the symbol for danger. It warns of risks of injury.
Follow all measures identified by this symbol to avoid injury or death.
Additional danger symbols
These symbols indicate general dangers, the type of danger or possible
consequences, measures and prohibitions, examples of which are shown in the
following table:
General danger Explosive atmosphere
Voltage/electric shock Laser light
Battery Heat

Safety
Safety instructions
2
13 |
42
Building Technologies
A6V10349616_i_en_
--
Fire Safety
2019
-
01
-
18
Signal word
The signal word classifies the danger as defined in the following table:
Signal word Danger level
DANGER 'DANGER' identifies a dangerous situation, which will result directly in death or
serious injury if you do not avoid this situation.
WARNING 'WARNING' identifies a dangerous situation, which may result in death or serious
injury if you do not avoid this situation.
CAUTION 'CAUTION' identifies a dangerous situation, which could result in slight to
moderately serious injury if you do not avoid this situation.
NOTICE
' NOTICE ' identifies a possibly harmful situation or possible damage to property
that may result from non-observance.
'
NOTICE ' does not relate to possible bodily injury.
How risk of injury is presented
Information about the risk of injury is shown as follows:
WARNING
Nature and origin of the danger
Consequences if the danger occurs
●
Measures /
prohibitio
ns for danger avoidance
How possible damage to property is presented
Information about possible damage to property is shown as follows:
NOTICE
Nature and origin of the danger
Consequences if the danger occurs
●
Measures /
prohibitions for danger avo
idance

Safety
Safety regulations for the method of operation
2
14 | 42
Building Technologies
A6V10349616_i_en_
--
Fire Safety
2019
-
01
-
18
2.2 Safety regulations for the method of operation
National standards, regulations and legislation
Siemens products are developed and produced in compliance with the relevant
European and international safety standards. Should additional national or local
safety standards or legislation concerning the planning, mounting, installation,
operation or disposal of the product apply at the place of operation, then these
must also be taken into account together with the safety regulations in the product
documentation.
Electrical installations
WARNING
Electrical voltage
Electric shock
●Work on electrical installations may only be carried out by qualified
electricians or by instructed persons working under the guidance and
supervision of a qualified electrician, in accordance with the electrotechnical
regulations.
●Wherever possible disconnect products from the power supply when carrying
out commissioning, maintenance or repair work on them.
●Lock volt-free areas to prevent them being switched back on again by mistake.
●Label the connection terminals with external external voltage using a
'DANGER External voltage' sign.
●Route mains connections to products separately and fuse them with their own,
clearly marked fuse.
●Fit an easily accessible disconnecting device in accordance with IEC 60950-1
outside the installation.
●Produce earthing as stated in local safety regulations.
Mounting, installation, commissioning and maintenance
●If you require tools such as a ladder, these must be safe and must be intended
for the work in hand.
●When starting the fire control panel ensure that unstable conditions cannot
arise.
●Ensure that all points listed in the 'Testing the product operability' section below
are observed.
●You may only set controls to normal function when the product operability has
been completely tested and the system has been handed over to the customer.
WARNING
Work carried out by personnel who are not qualified
Risk of explosion
●Work in potentially explosive areas may only be carried out by qualified
specialists or by specially instructed persons, in accordance with the national
and international directives and regulations.
●You must only mount, install, and test the devices if the atmosphere in the area
is not at risk of explosion.

Safety
Safety regulations for the method of operation
2
15 |
42
Building Technologies
A6V10349616_i_en_
--
Fire Safety
2019
-
01
-
18
Testing the product operability
●Prevent the remote transmission from triggering erroneously.
●If testing building installations or activating devices from third-party companies,
you must collaborate with the people appointed.
●The activation of fire control installations for test purposes must not cause
injury to anyone or damage to the building installations. The following
instructions must be observed:
●Use the correct potential for activation; this is generally the potential of the
building installation.
●Only check controls up to the interface (relay with blocking option).
●Make sure that only the controls to be tested are activated.
●Inform people before testing the alarm devices and allow for possible panic
responses.
●Inform people about any noise or mist which may be produced.
●Before testing the remote transmission, inform the corresponding alarm and
fault signal receiving stations.
Modifications to the system design and the products
Modifications to the system and to individual products may lead to faults,
malfunctioning and safety risks. Written confirmation must be obtained from
Siemens and the corresponding safety bodies for modifications or additions.
No changes may be made to devices with EC-type examination certificates.
Modules and spare parts
●Components and spare parts must comply with the technical specifications
defined by Siemens. Only use products specified or recommended by
Siemens.
●Only use fuses with the specified fuse characteristics.
●Wrong battery types and improper battery changing lead to a risk of explosion.
Only use the same battery type or an equivalent battery type recommended by
Siemens.
●Batteries must be disposed of in an environmentally friendly manner. Observe
national guidelines and regulations.
Disregard of the safety regulations
Before they are delivered, Siemens products are tested to ensure they function
correctly when used properly. Siemens disclaims all liability for damage or injuries
caused by the incorrect application of the instructions or the disregard of danger
warnings contained in the documentation. This applies in particular to the following
damage:
●Personal injuries or damage to property caused by improper use and incorrect
application
●Personal injuries or damage to property caused by disregarding safety
instructions in the documentation or on the product
●Personal injury or damage to property caused by poor maintenance or lack of
maintenance

Safe
ty
Standards and directives complied with
2
16 | 42
Building Technologies
A6V10349616_i_en_
--
Fire Safety
2019
-
01
-
18
Disclaimer
We have checked that the content of this document matches the hardware and
software described. Despite this, we cannot rule out deviations and cannot
therefore assume liability for them matching completely. The details in this
document are checked regularly and any corrections needed included in
subsequent editions.
We are grateful for any suggestions for improvement.
2.3 Standards and directives complied with
A list of the standards and directives complied with is available from your Siemens
contact.
2.4 Release Notes
Limitations to the configuration or use of devices in a fire detection installation with
a particular firmware version are possible.
WARNING
Limited or non
-
existent fire detection
Personal injury and damage to property in the event of a fire.
●Read the 'Release Notes' before you plan and/or configure a fire detection
installation.
●Read the 'Release Notes' before you carry out a firmware update to a fire
detection installation.
NOTICE
Incorrect
planning and/or configuration
Important standards and specifications are not satisfied.
Fire detection installation is not accepted for commissioning.
Additional expense resulting from necessary new planning and/or configuration.
●Read the 'Release Notes' before you plan and/or configure a fire detection
installation.
●Read the 'Release Notes' before you carry out a firmware update to a fire
detection installation.

Structure and function
Overview
3
17 |
42
Building Technologies
A6V10349616_i_en_
--
Fire Safety
2019
-
01
-
18
3 Structure and function
3.1 Overview
The manual call points are intended for use in places where a fire can be detected
by people who can manually trigger an alarm.
The manual call point consists of a housing and a switching unit. It has the
following features:
●Indirect activation
●Two-wire installation for all cable types
●Individual detector addressing
●Indication of the status (alarm, localization or test) by means of a dichromatic
LED
●Communication via FDnet/C-NET
●Mounting on the FDnet-Ex/C-NET-Ex downstream of a line adapter (Ex)
FDCL221-Ex
●Can be addressed on the FDnet-Ex/C-NET-Ex detector line
Figure 1: Use of a manual call point FDM223-Ex on the FDnet-Ex downstream of a line adapter (Ex)
FDCL221-Ex
3.1.1 Details for ordering
Type Order number Designation
FDM223-Ex
(complete) S54329-F5-A1 Red housing with glass insert, Allen key, switching unit, 3 cable grippers (2-hole), and 'Not in use' sign
3.1.2 Reference to technical manual
You will find this symbol on all devices designed for use in areas at risk
of explosion. It indicates that you will find important information on using
the device correctly in the technical manuals.
Read and follow the instructions in the technical manual.
Area not at risk Ex area
FDnet-Ex/C-NET-Ex
FC20xx/FC72x
FDnet/C-NET
FDCL221-Ex

Structure and function
Overview
3
18 | 42
Building Technologies
A6V10349616_i_en_
--
Fire Safety
2019
-
01
-
18
3.1.3 Product version ES
The product version ES provides the technical status of a device in terms of
software and hardware. The product version is provided as a two-digit number.
You will find the details of your device's product version:
●On the packaging label
●On the product label or the type plate
Product version on the packaging label
Details of the product version can be found directly on the packaging label in the
barcode:
Figure 2: Example of a packaging label with details of the product version
Product version on the product label and the type plate
Details of the product version can be found after the device order number:
Figure 3: Example of a product label with details of the product version
Depending on the product and various approvals, the product labels may differ in
terms of the information type and layout.
Look for your device's order number on the product label.
You will find the product version after the order number.
ES
ES
04

Structure and function
Setup
3
19 |
42
Building Technologies
A6V10349616_i_en_
--
Fire Safety
2019
-
01
-
18
3.2 Setup
3.2.1 Manual call point FDM223-Ex
The FDM223-Ex manual call point triggers an alarm when the glass insert is
pushed in and the alarm button is pressed (indirect activation). The alarm is
immediately transmitted to the control panel.
To reset the manual call points after an alarm, a new glass
insert must be
inserted.
Figure 4: Manual call point FDM223-Ex with opened door
1 Housing 5 Glass insert
2 Switching unit 6 Guide for the glass insert
3 Spring clips 7 Internal alarm indicator
4 Locking lever 8 Alarm button
6
1234
5
7
8

Structure and function
Setup
3
20 | 42
Building Technologies
A6V10349616_i_en_
--
Fire Safety
2019
-
01
-
18
3.2.2 Connections
The manual call point FDM223-Ex has six spring clips on the top of the switching
unit; these are for the detector line and for connecting external alarm indicators.
Figure 5: Switching unit with spring clips
3.2.3 Indication elements
A two-color LED is built into the switching unit as an internal alarm indicator.
Figure 6: Switching unit with alarm indicator
See also
2Internal alarm indicator [➙21]