Silhouette Elegance Rimless The Icon Gold Edition 5538 Owner's manual

Elegance Rimless
Technical
Instructions
Model 5538 and 5539 TMA –The Icon Gold
Edition
Model 5536 Light Facette
Model 5537 Venture

Elegance Rimless | Glazing with Silhouette Vision
Sensation®Lenses
Silhouette now offers premium prescription lenses
for all Silhouette frames
Expertly crafted in Austria using our exclusive
Panorama®lens designs, Silhouette Vision Sensation®
lenses perfectly match the curve of every Silhouette
frame
This results in a complete visual solution that offers
the wearer exceptional visual comfort and edge to
edge clarity
For more information visit:
https://www.silhouette.com/us/us/vision-sensation
or contact your Silhouette Account Executive

Elegance Rimless | Glazing
Frames are designed with a 5.0 base curve
Other base curves will work and will require bridge adjustment
Recommended lenses are High Index 1.6, 1.67, Polycarbonate and Trivex
Patterns available from Silhouette customer service at 800-223-0180
OMA shape files available at
https://portal.silhouette.com
www.silhouettelab.com

TMA The Icon Gold Edition 5538 / 5539

Mount lenses using BLS 58 sleeve and Silhouette mounting plier with gray or
purple tip.
TMA The Icon Gold Edition | Glazing

•Hold lens fixation firmly with
mounting pliers
TMA The Icon Gold Edition | Inclination
•Bend temple into desired
direction

•Hold lens fixation firmly with
fingers
•Use blue multi-tool to enlarge
the temple opening
TMA The Icon Gold Edition | Enlarge
Temple Opening

•Hold lens fixation firmly with
fingers
•Use blue multi-tool to reduce
the temple opening
TMA The Icon Gold Edition | Reduce
Temple Opening

•Adjust the temple to the ear shape with large curves.
•During temple-end adjusting do not put pressure on the
temple tip (circled).
TMA The Icon Gold Edition | Adjust temple
end

TMA The Icon Gold Edition | Temple length
changes
•Silhouette offers multiple temple lengths for many of our frames
•Please call customer service to determine if the correct length
temples are available!
•If temples need trimming, please use procedure on following
pages.

TMA The Icon Gold Edition | Temple Length
Trimming
1. Straighten temple end and pull off temple cover.

TMA The Icon Gold Edition | Temple Length
Trimming
2. Shorten titanium wire with metal-diagonal cutter
3. File down sharp edges and burrs.

TMA The Icon Gold Edition | Temple Length
Trimming
4. Squeeze titanium wire with round pliers at the very end to
ensure the stability of the temple.
5. Replace temple cover.

Lite Facette and Venture 5536 / 5537

Mount lenses using BLS 58 sleeve and Silhouette mounting plier with turquoise or
blue tip
Lite Facette and Venture | Glazing

•Fully open temple
•Support lens fixation with
mounting pliers
•Adjust inclination at the hinge
in required direction
Lite Facette and Venture | Inclination

•Construction of the high
precision hinge is not
serviceable
•The spare part is the temple
and endpiece together
Lite Facette and Venture | Temple
exchange

Lite Facette and Venture | Enlarge temple
opening
•Fully open temple
•Support lens fixation with
mounting pliers
•Bend temple outward at end
piece to desired position

Lite Facette and Venture | Reduce temple
opening
•Fully open temple
•Support lens fixation with
mounting pliers
•Bend temple inward at end
piece to desired position

•Adjust the temple to the ear shape with large curves
•During temple-end adjusting do not put pressure on the
temple tip (circled).
Lite Facette and Venture | Adjust temple
end