Silhouette Titan Contour Owner's manual

Titan Contour
Technical Instructions

Inclination
3. Enclose temple edge tightly and
adjust inclination on titanium
side part in direction shown.
1. Hold lens fixation firmly with
mounting pliers.
2. Open temple completely.

Adjust Temple Opening
Reduce Enlarge

Temple Disassembly
1. Place disassembly tool at hinge.
Select correct diameter of round
stick according to distance
between temple and lens.
2. Close temple and press behind round
stick.
3. Temple will loosen with a click.

Grease hinge with Teflon
After cleaning grease inside loop of hinge with Teflon high precision
lubricant out of mounting box (P 0033), then mount lenses.

Temple Assembly
PRESS
2. Apply counter pressure on side part.
3. Press temple into side part.
1. Place side part at temple holes.



Adjust Temple End
−Curve temple end in large movements to adjust behind the ear.
−Do not over bend.
PRESS
55 mm