Silvercrest 353449 2007 Product information sheet

STEAM BRUSH /DAMPFBÜRSTE
DÉFROISSEUR À MAIN SDMF 1300 A1
DAMPFBÜRSTE
Bedienungsanleitung und Sicherheitshinweise
DÉFROISSEUR À MAIN
Mode d‘emploi et consignes de sécurité
STEAM BRUSH
Operating instructions and safety instructions
STOOMBORSTEL
Gebruiksaanwijzing en veiligheidsvoorschriften
NAPAŘOVACÍ KARTÁČ
Návod k obsluze a bezpečnostní pokyny SZCZOTKA PAROWA
Instrukcja obsługi i wskazówki bezpieczeństwa
NAPAROVACIA KEFA
Návod na obsluhu a bezpečnostné pokyny
IAN 353449_2007
CEPILLO DE VAPOR
Instrucciones de uso e indicaciones de seguridad
STRYGE- OG DAMPJERN
Betjeningsvejledning og sikkerhedsanvisninger

GB Operating instructions and safety instructions Page 1
DE Bedienungsanleitung und Sicherheitshinweise Seite 19
FR Mode d‘emploi et consignes de sécurité Page 37
NL Gebruiksaanwijzing en veiligheidsvoorschriften Pagina 57
CZ Návod k obsluze a bezpečnostní pokyny Strana 75
PL Instrukcja obsługi i wskazówki bezpieczeństwa Strona 93
SK Návod na obsluhu a bezpečnostné pokyny Strana 111
ES Instrucciones de uso e indicaciones de seguridad Página 129
DK Betjeningsvejledning og sikkerhedsanvisninger Side 147
Before reading, unfold the page containing the illustrations and familiarise yourself with all functions of the
device.
Klappen Sie vor dem Lesen die Seite mit den Abbildungen aus und machen Sie sich anschließend mit
allen Funktionen des Gerätes vertraut.
Avant de lire le mode d‘emploi, ouvrez la page contenant les illustrations et familiarisez-vous ensuite avec
toutes les fonctions de l‘appareil.
Vouw vóór het lezen de pagina met de afbeeldingen open en maak u vertrouwd met alle functies van het
apparaat.
Před čtením si otevřete stranu s obrázky a potom se seznamte se všemi funkcemi přístroje.
Przed przeczytaniem proszę rozłożyć stronę z ilustracjami, a następnie proszę zapoznać się z wszystkimi
funkcjami urządzenia.
Pred čítaním si odklopte stranu s obrázkami a potom sa oboznámte so všetkými funkciami prístroja.
Antes de empezar a leer abra la página que contiene las imágenes y, en seguida, familiarícese con todas
las funciones del dispositivo.
Før du læser, vend siden med billeder frem og bliv bekendt med alle apparatets funktioner.

GB│IE │ 1 ■
SDMF 1300 A1
Contents
Introduction...................................................2
Intended use ............................................................ 2
Setting up.....................................................2
Package contents and transport inspection ..................................... 2
Safety information .............................................3
Parts and operating components .................................7
Beforefirstuse ................................................7
Operation ....................................................8
Filling the water tank ...................................................... 8
Care instructions and usage recommendations.................................. 9
Steam function ..........................................................10
Steaming with the clothes brush. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 10
Afteruse ....................................................11
Cleaning.....................................................11
Housing ...............................................................11
Descaling..............................................................12
Storage .....................................................12
Disposal .....................................................13
Disposal of the packaging.................................................13
Disposal of the appliance ................................................. 13
Troubleshooting ..............................................14
Fault causes and remedies.................................................14
Appendix....................................................15
Technical data ..........................................................15
Notes on the EU Declaration of Conformity ...................................15
Kompernass Handels GmbH warranty .......................................15
Service................................................................17
Importer ............................................................... 17

■ 2 │ GB│IE SDMF 1300 A1
Introduction
Congratulations on the purchase of your new appliance.
You have selected a high-quality product. The operating instructions are an
integral part of this product. They contain important information about safety,
usage and disposal. Before using the product, please familiarise yourself with all
operating and safety instructions. Use the product only as described and for the
range of applications specified. Please also pass these operating instructions on
to any future owner.
Intended use
This appliance is intended exclusively for steam brushing/smoothing clothes. The
appliance may only be used indoors and in private households. Any other use is
deemed improper.
The appliance is not intended for use in commercial or industrial environments.
The manufacturer accepts no responsibility for damage caused by failure to
observe these instructions, improper use or repairs, unauthorised modifications or
the use of unapproved replacement parts. The risk is borne solely by the user.
Setting up
Package contents and transport inspection
(See fold-out page for illustrations)
DANGER
► Do not allow children to play with packaging materials.
There is a risk of suffocation.
ƇRemove all parts of the appliance and the operating instructions from the
box.
ƇRemove all packaging materials from the appliance.
The following components are included in delivery:
▯ Steam brush
▯ Clothes brush
▯ Operating instructions
NOTE
► Check the package for completeness and signs of visible damage.
► If the contents are incomplete or damaged due to defective packaging or
through transportation, contact the Service Hotline.

GB│IE │ 3 ■
SDMF 1300 A1
Safety information
RISK OF ELECTRIC SHOCK
► The rating of the power supply must correspond with the
details given on the rating plate of the appliance.
► To avoid potential risks, arrange for a defective appliance
to be checked and, if required, repaired by qualified
technicians, or contact our Customer Service Department.
► Arrange for defective power plugs and/or cables to be
replaced as soon as possible by a qualified technician or by
our Customer Service Department to avoid the risk of injury.
► Pull only on the plug itself when unplugging the appliance,
never on the power cable.
► Never bend (kink) or crush the power cable, always route
it in such a way that it cannot come into contact with hot
surfaces and such that no one can step on or trip over it.
► Remove the plug from the mains power socket after every
use, before cleaning the appliance and before refilling the
appliance with water.
► Always unwind the power cable fully before switching on
and do not use an extension cable.
► Never touch the power cable or the plug with wet hands.
► Never use the appliance adjacent to water contained in a
bath, shower, wash basin or other vessels. The proximity of
water is hazardous, even if the appliance is switched off.

■ 4 │ GB│IE SDMF 1300 A1
RISK OF ELECTRIC SHOCK
► Under no circumstances should the appliance be immersed
in liquids or liquids be allowed to penetrate the housing.
► Do not expose the appliance to humidity and do not use it
outdoors. If any liquid gets into the housing, disconnect the
appliance from the power socket immediately and have it
repaired by a qualified technician.
► Do not open the appliance housing. If the appliance is
defective, have it repaired by an authorised technician only.
► Do not use the appliance if it shows visible signs of damage,
has fallen or leaks water. Arrange for it to be repaired by
qualified specialists.
► This appliance may be used by children aged 8 years or
more and by persons with reduced physical, sensory or
mental capabilities or lack of experience and/or knowledge
if they are supervised by an adult or have been instructed
in the safe use of the appliance and have understood the
potential risks.
► Do not allow children to use the appliance as a toy.
Cleaning and user maintenance may not be carried out
by children unless they are supervised.

GB│IE │ 5 ■
SDMF 1300 A1
WARNING! RISK OF INJURY!
► Always place the appliance on its stand.
► Always place the appliance on a level and heat-resistant
surface. The appliance must be in a stable position.
► Never leave the appliance unattended while it is hot,
switched on or connected to the mains power supply.
► Children should be supervised to ensure that they do not
play with the appliance.
► Never aim the steam at people, animals or clothing that is
being worn.
► Never place your hands in the steam or on the hot metal
parts.
► Do not open the filler opening for the water tank during use.
Allow the appliance to cool down completely, then remove
the plug from the power socket.
► Do not put the appliance away until it has cooled down
completely.
► The appliance and its connecting cable must be kept out
of the reach of children under the age of than 8 while it is
switched on or cooling down.
► Never allow children to use the appliance unattended.
► The appliance should be used with caution, as it can release
steam.
Caution! Hot surface!

■ 6 │ GB│IE SDMF 1300 A1
CAUTION – PROPERTY DAMAGE!
► Observe the care instructions on the label of your clothing
and set a suitable temperature for the material. Otherwise,
you could damage the textiles. If you do not have any care
instructions, test the appliance on a non-visible part of the
clothing first, e.g. on the inseam.
► If the clothing care instructions forbid ironing ( symbol),
the clothing item must not be steamed with the appliance.
Ignoring this warning could lead to permanent damage to
the clothing item.
► For steaming clothes, the water tank of the steamer should
be filled only with tap water or distilled water. Otherwise,
you will damage the appliance.
► Do not clean the appliance with aggressive, chemical or
abrasive cleaning agents. These could damage it.

GB│IE │ 7 ■
SDMF 1300 A1
Parts and operating components
(See fold-out page for illustrations)
1Blue LED (flashes while heating up/remains on when ready for use)
2Red LED
3On/Off switch
4Clothes brush
5Steam head
6Steam button
7Water tank release buttons
8Water tank filler opening
9Water tank lid
0Water tank (with MAX marking to indicate maximum fill level)
qPower cable (with mains plug)
wHandle
Before first use
NOTE
► When you use the appliance for the first time, it might emit some smoke, a
harmless odour and a small amount of particles. This does not affect the
function of the appliance and does not last long.
ƇTo remove production-related residues from the heating and water circulation
system, fill the water tank 0 with water and press the steam button until the
water tank 0is approximately half empty (see section Operation).
ƇHold the appliance over a washbasin or similar. In this way, the production
residues are flushed out of the pipes.
ƇThen press the steam button again and use an old cloth to test whether
residues are still coming out of the steam openings.
ƇIf there are no more residues, the device is now ready for operation. If you
can still see particles on the cloth, repeat the above procedure.

■ 8 │ GB│IE SDMF 1300 A1
Operation
Filling the water tank
WARNING – RISK OF INJURY!
► Never fill the water tank 0through the holes in the steam head 5.
► Never submerge the steam head 5under water.
NOTE
► The appliance should only be used with tap water or distilled water for
steaming. If your tap water is hard, we recommend that you mix it with
distilled water. Otherwise, the appliance will accumulate limescale quickly.
Mix the tap water with distilled water in accordance with the following
table for optimal performance.
Water hardness Ratio of distilled
water to mains water
very soft/soft 0
medium 1: 1
hard 2: 1
very hard 3: 1
Information about the level of hardness of water in your area can be
obtained from your local water company.
► Never use water that contains additives (e.g. starch, perfumes, softening
agents) or condensation (e.g. from dryers, refrigerators, air conditioning
units or rain). These may contain organic or mineral residues that accumu-
late when exposed to heat and can cause noise, brown discolouration and
premature failure of the appliance.
1) Remove the mains plug from the power socket if connected.
2) Remove the water tank 0from the appliance by pressing the release
buttons 7on the left and right side and then pulling the water tank 0
straight out of the appliance (fig. A).
3) Open the lid 9and fill the water tank 0(fig. B). The MAX mark
indicates the maximum fill level.
4) Close the lid 9and replace the water tank 0in the appliance.
The water tank 0must audibly click into place.

GB│IE │ 9 ■
SDMF 1300 A1
AB
Care instructions and usage recommendations
CAUTION – PROPERTY DAMAGE!
► You can use the device to treat all materials marked with these ironing
symbols:
–(synthetic fibre, e.g. viscose, polyester)
–(silk, wool)
–(cotton, linen)
► If the clothing care instructions forbid ironing ( symbol), the clothing
item may not be steamed with the appliance. Ignoring this warning could
lead to permanent damage to the clothing item.
► Do not treat leather, velvet, waterproofed furniture or fabrics that are
sensitive to steam. Doing so could damage the textile or the piece of
furniture.
ƇBefore using the appliance, familiarise yourself with the manufacturer’s care
instructions on the label of your clothing.
ƇIf are not sure whether you should steam the clothing, test the appliance on a
non-visible part of the clothing first, e.g. on the inseam.
ƇApply the clothes brush 4to the fabric gently and use slow movements.
ƇAvoid any direct contact between the steam head 5and silk or velour.
ƇHeavier fabrics may need to be steamed for longer.
ƇFabrics absorb moisture during steaming. Always allow garments to dry
completely after steaming.

■ 10 │ GB│IE SDMF 1300 A1
Steam function
WARNING – RISK OF INJURY!
► Never attempt to steam pieces of clothing while they are being worn.
1) Plug the mains cable qinto the power socket and turn on the power by
pressing the On/Off switch 3. The blue LED 1 flashes during the
warm-up phase. As soon as the blue LED 1lights up permanently, the
appliance will start producing steam.
2) Hold the appliance by the handle w. Make sure you aim the steam openings
on the steam head 5away from your body.
3) Press the steam button 6and start at the top of the garment. Move the
steam head 5slowly downwards.
NOTE
► For the continuous steam output, you can also lock the steam button
6by sliding it downwards.
► You can use the steam function with or without the clothes brush 4.
4) Release the steam button 6as soon as water drips from the steam
head 5. The appliance will need to heat up again.
Steaming with the clothes brush
1) Before switching on the appliance, place the clothes brush 4on the steam
head 5, making sure that the large wing is on the underside of the steam
head 5(fig. C). Push the clothes brush 4onto the steam head 5until it
clicks into place.
C
2) Switch the appliance on.
3) Hang the item to be ironed on a coat hanger and pull it taut with one hand.
Steam the garment evenly from top to bottom.
4) Slowly brush the section of the fabric from top to bottom. Do not apply a lot of
pressure. The combination of steam and the clothes brush 4 gently removes
all wrinkles.

GB│IE │ 11 ■
SDMF 1300 A1
5) Turn off the appliance by pressing the On/Off switch 3. Remove the plug
from the power socket and allow the appliance to cool down completely.
6) To remove the clothes brush 4from the steam head 5, slide the large wing
on the underside of the clothes brush 4forward with your thumb until the
clothes brush 4detaches from the steam head 5(figs. D and E).
DE
After use
1) Once you have finished using the appliance, press the On/Off switch 3
again to switch it off. The blue LED 1goes out. You can now disconnect
the appliance from the power supply.
2) Before putting the appliance away, allow it to cool down completely. Empty
the water tank 0after each use.
NOTE
► The appliance automatically switches to standby mode after 15 minutes if
it is not used during this time (auto-off function). The red LED 2flashes in
standby mode.
Cleaning
Housing
WARNING – RISK OF ELECTRIC SHOCK!
► Before cleaning the appliance, disconnect the power plug from the power
socket. Otherwise, there is a risk of electrocution.
WARNING – RISK OF INJURY!
► Before cleaning the appliance, always remove the plug from the socket
and allow the appliance to cool down completely. Otherwise, there is a
risk of burns.

■ 12 │ GB│IE SDMF 1300 A1
CAUTION – PROPERTY DAMAGE!
► Do not use abrasive, aggressive or chemical cleaning agents. They
can damage the surface and also lead to irreparable damage to the
appliance.
ƇClean the housing and the steam head 5only with a soft cloth lightly
moistened with water.
ƇAfter cleaning, allow the housing to dry completely before using the
appliance again.
Descaling
The appliance must be descaled regularly to maintain its maximum
performance. The frequency of descaling depends on the quality of the water
and the frequency with which the appliance is used.
We recommend that you descale the appliance either once a year or after
50 hours of total use. We recommend descaling immediately, however, if you
notice that the appliance is generating less steam.
NOTE
► You can do this with a regular descaling agent containing citric acid.
Also observe the instructions for the descaling agent.
1) Ensure that the appliance has completely cooled down.
2) Add the descaling agent to the water tank 0.
3) Plug the mains cable qinto the power socket and turn on the power by
pressing the On/Off switch 3. The blue LED 1flashes.
4) Allow the descaling agent to take effect for a few minutes.
5) Press the steam button 6and start steaming an old piece of cloth with the
steam brush.
6) Afterwards, refill the water tank 0with pure water and steam another old
cloth to remove descaler residues.
Storage
ƇAfter use, allow the appliance to cool down completely.
ƇEmpty any remaining water from the water tank 0.
ƇStore the appliance in a clean, dry location.

GB│IE │ 13 ■
SDMF 1300 A1
Disposal
Disposal of the packaging
The packaging materials have been selected for their environmental friendliness
and ease of disposal and are therefore recyclable.
Dispose of packaging materials that are no longer needed in accordance with
applicable local regulations.
Dispose of the packaging in an environmentally friendly manner.
Note the labelling on the packaging and separate the packaging material
components for disposal if necessary. The packaging material is labelled with
abbreviations (a) and numbers (b) with the following meanings:
1–7: plastics,
20–22: paper and cardboard,
80–98: composites.
Disposal of the appliance
The adjacent symbol of a crossed-out wheelie bin means that this appliance is
subject to Directive 2012/19/EU. This directive states that this appliance may
not be disposed of in normal household waste at the end of its useful life, but
must be brought to a specially set-up collection point, recycling depot or disposal
company.
This disposal is free of charge for the user. Protect the environment
and dispose of this appliance properly.
Your local community or municipal authorities can provide information on how to
dispose of the worn-out product.
The product is recyclable, subject to extended producer responsibility and is
collected separately.

■ 14 │ GB│IE SDMF 1300 A1
Troubleshooting
This section contains important information on fault identification and
rectification. Follow the instructions to avoid hazards and damage.
Fault causes and remedies
The following table will help you to identify and rectify minor malfunctions. If the
solutions presented below do not resolve the problem, please contact the Service
Hotline.
Fault Cause Remedy
The appliance does
not emit steam.
The appliance is not
switched on.
Make sure that the appliance
is properly connected to the
power supply and press the
On/Off switch 3. The blue
LED 1 should flash during
the heating phase.
The water tank 0is
empty.
Switch the appliance off and
fill the water tank 0.
The steam is used
up.
Allow the appliance to heat up
again.
The appliance emits
only a very small
amount of steam.
Limescale has
accumulated in the
appliance.
See section "Cleaning" –
Descaling.
The water tank 0is
empty.
Switch the appliance off and
fill the water tank 0.
There is no steam
available yet.
The appliance does not start
producing steam until around
30 seconds after switching on.
The steam is almost
used up.
Allow the appliance to heat up
again.
The appliance takes
a long time to heat
up and/or white
particles are coming
out of it.
Limescale has
accumulated in the
appliance.
See section "Cleaning" –
Descaling.
Water drips from the
steam head 5.
Limescale has
accumulated in the
appliance.
See section "Cleaning" –
Descaling.

GB│IE │ 15 ■
SDMF 1300 A1
Appendix
Technical data
Power supply 220-240 V ∼ (AC), 50-60 Hz
Power consumption 1300W
NOTE
► No user action is required to switch the product between 50 and 60 Hz.
The product adapts automatically to either 50 or 60 Hz.
Notes on the EU Declaration of Conformity
This appliance complies with the basic requirements and other relevant provisions
of the Electromagnetic Compatibility Directive 2014/30/EU, the Low Voltage
Directive 2014/35/EU and the RoHS Directive 2011/65/EU.
The complete EU Declaration of Conformity is available from the importer.
Kompernass Handels GmbH warranty
Dear Customer,
This appliance has a 3-year warranty valid from the date of purchase. If this
product has any faults, you, the buyer, have certain statutory rights. Your statuto-
ry rights are not restricted in any way by the warranty described below.
Warranty conditions
The warranty period starts on the date of purchase. Please keep your receipt in a
safe place. This will be required as proof of purchase.
If any material or manufacturing fault occurs within three years of the date of
purchase of the product, we will either repair or replace the product for you or
refund the purchase price (at our discretion). This warranty service requires that
you present the defective appliance and the proof of purchase (receipt) within
the three-year warranty period, along with a brief written description of the fault
and of when it occurred.
If the defect is covered by the warranty, your product will either be repaired
or replaced by us. The repair or replacement of a product does not signify the
beginning of a new warranty period.
Warranty period and statutory claims for defects
The warranty period is not prolonged by repairs effected under the warranty. This
also applies to replaced and repaired components. Any damage and defects
present at the time of purchase must be reported immediately after unpacking.
Repairs carried out after expiry of the warranty period shall be subject to a fee.

■ 16 │ GB│IE SDMF 1300 A1
Scope of the warranty
This appliance has been manufactured in accordance with strict quality guide-
lines and inspected meticulously prior to delivery.
The warranty covers material faults or production faults. The warranty does not
extend to product parts subject to normal wear and tear or to fragile parts which
could be considered as consumable parts such as switches, batteries or parts
made of glass.
The warranty does not apply if the product has been damaged, improperly used
or improperly maintained. The directions in the operating instructions for the
product regarding proper use of the product are to be strictly followed. Uses and
actions that are discouraged in the operating instructions or which are warned
against must be avoided.
This product is intended solely for private use and not for commercial purposes.
The warranty shall be deemed void in cases of misuse or improper handling, use
of force and modifications/ repairs which have not been carried out by one of
our authorised Service centres.
Warranty claim procedure
To ensure quick processing of your case, please observe the following instructions:
ƇPlease have the till receipt and the item number (e.g.IAN123456_7890)
available as proof of purchase.
ƇYou will find the item number on the type plate on the product, an engraving
on the product, on the front page of the operating instructions (below left) or
on the sticker on the rear or bottom of the product.
ƇIf functional or other defects occur, please contact the service department
listed either by telephone or by e-mail.
ƇYou can return a defective product to us free of charge to the service address
that will be provided to you. Ensure that you enclose the proof of purchase
(till receipt) and information about what the defect is and when it occurred.
You can download these instructions along with many other manuals,
product videos and installation software at www.lidl-service.com.
This QR code will take you directly to the Lidl service page
(www.lidl-service.com) where you can open your operating instructions
by entering the item number (IAN) 353449_2007.

GB│IE │ 17 ■
SDMF 1300 A1
Service
Service Great Britain
Tel.: [phone]
E-Mail: [email protected]
Service Ireland
Tel.: [phone]
(0,08EUR/ Min.,(peak))
(0,06EUR/ Min.,(off peak))
E-Mail: [email protected]
IAN 353449_2007
Importer
Please note that the following address is not the service address. Please use the
service address provided in the operating instructions.
KOMPERNASS HANDELS GMBH
BURGSTRASSE 21
44867 BOCHUM
GERMANY
www.kompernass.com