
S P E C I F I C A T I O N S
SMART Board 8084i-G4 interactive flat panel – Models 8084i-G4-SMP
smarttech.com/kb/170451 3
Installation requirements
Installation See the SMARTBoard 8000i-G4 interactive flat panel setup and maintenance guide
(smarttech.com/kb/170446)
Computer See smarttech.com/SMARTMeetingProReleaseNotes
Storage and operating requirements
Power requirements 100V to 240V AC, 50 Hz to 60 Hz
Power consumption at 77°F (25°C)
Normal Standby mode 120 W
Normal operating 370 W
Maximum operating
(Vividmode)
530 W
Operating temperature 41°F to 95°F (5°C to 35°C)
Storage temperature 23°F to 95°F (-5°C to 35°C)
Humidity 5% to 80% relative humidity, non-condensing
Certification and compliance
Regulatory certification UL (U.S. and Canada), FCC, IC, C-Tick, NOM, CU, CB, PSE, VCCI, KC, CCC, PSB and BIS
Environmental compliance
China EIP
European Union REACH, RoHS, WEEE, Battery, Packaging and ErP Standby
U.S. Packaging and Conflict Minerals
Purchasing information
Order number
SBID 8084i-G4-SMP SMARTBoard 8084i-G4 interactive flat panel, including a SMARTMeetingPro software
licensekey and a SMARTGoWire cable with SMARTMeetingPro PE software
Optional accessories See smarttech.com/businessaccessories
Warranty Two-year limited equipment warranty
smarttech.com/support
smarttech.com/contactsupport
© 2013 SMARTTechnologiesULC. All rights reserved. SMARTBoard, DViT, SMARTMeetingPro, SMARTGoWire, smarttech, the SMART logo and all SMART taglines are trademarks or
registered trademarks of SMARTTechnologiesULC in the U.S. and/or other countries. All third-party product and company names may be trademarks of their respective owners. This product and/or
use thereof covered by one or more of the following U.S. patents. www.smarttech.com/patents. Contents are subject to change without notice. 06/2013.