SMITH SYSTEM 26672 User manual

Assembly Instructions
for the following workstations:
www.smithsystem.com
For assistance in assembling product, missing or damaged
parts, or to place an order please contact customer service at 1-800-328-1061.
You may also place your order online at
Corner Circulation Desk
Model:
26672
Form # 179862
8/2006
page 1 of 5

You will need a Phillips head screw driver.
If you have damaged or missing components or hardware please contact customer service at 1 [phone].
10-32X1/2" Machine Screws (4)* 1/4-20X1/2" Machine Screws (24)*
Leg Set (1)
(2 Legs per set)
Brackets (2)
Table Top (1)
Tinnerman clips (4)
Corner Leg (1)
Modesty Panels (2)*
*Our Circulation Workstations come in different lengths and shapes, so hardware and screw hole placement will
vary. If you feel you have not received all the hardware necessary, please call us at 800-328-1061
Questions? Call us.
1. Check that all components are accounted for and undamaged before assembling.
2. Please assemble product in a clean and dry area.
3. For larger units you may need another person to help assemble the product.
4. Clean the product with a mild cleaner and a damp cloth.
8/2006
page 2 of 5Form # 179862
#10 Wood Screws (16)*

Step 2. Now attach the legs to the brackets using the (8) 1/4-20X1/2" Machine Screws, (4) per leg.
(See Drawing 2A).
Step 1. Locate all the parts needed for assembly. Place the table top face down on a clean, dry surface. Attach the
brackets to the top using the (8) #10 Wood Screws by using a Phillips head screw driver. (See Drawing 1A).
Next attach the corner leg to the top using (4) #10 Wood Screws. (See Drawing 1B).
Drawing 1
Drawing 1B
Drawing 1A
Drawing 2
Drawing 2A
Assembly Instructions for
Corner Circulation Workstation
Form# 179862
8/2006
page 3 of 5

www.smithsystem.com
If you have damaged or missing components please
contact customer service.
800-328-1061
Assembly Instructions for
Corner Circulation Workstation
Step 3. Now adjust the corner leg to the desired height using (4) 1/4-20x1/2" Machine Screws. (See Drawing 3A).
Next adjust the side legs using (8) 1/4-20x1/2" Machine Screws to desired height. (See Drawing 3B).
Drawing 3C shows the side view of what the exact length the leg needs to be set at.
*Note slot hole direction*
Step 4. Once the legs are secure, place both modesty panels on a smooth clean surface with the predrilled holes
facing up. Next attach the brackets to both panels using (6) #10 Wood Screws per panel. Do not
completely tighten screws. (See drawing 4A).
Drawing 3B
Drawing 3C
Drawing 4
Drawing 4A
*7" minimum for
panel clearance*
*Be sure to have
5 holes showing*
Drawing 3
Drawing 3A
Form# 179862 8/2006
page 4 of 5

Drawing 5
Step 6. Now go back and tighten all the screws referenced in all 5 steps. With help, tip the desk in the upright
position. Your desk is ready for use.
Step 5. Next loosely attach panel assembly to legs using (4) 1/4-20x1/2" Machine Screws per panel. Use 2
Wood Screws per panel to attach the bracket to the table top.