Solplanet ASW45K-LT-G3 User manual

ASW45K-LT-G3/ASW50K-LT-G3/ASW60K-LT-G3
Quick Installation Guide
Android iosiOS

The product is a transformerless PV inverter which converts the direct current of the
PV generator into grid-compatible three-phase alternating current and then feeds
the three-phase alternating current into the public power grid.
The product is intended for indoor and outdoor applications.
The product must only be connected with PV modules of protection class II (in accor-
dance with IEC 61730, application class A). Do not connect any sources of energy
other than PV modules to the product.
The product is not equipped with an integrated transformer and therefore has no
galvanic isolation. The product must not be operated with PV modules which require
functional grounding of either the positive or negative PV conductors. This can cause
the product to be irreparablyy damaged. The product may be operated with PV mod-
ules with frames that require protective earthing.
All components must remain within their permitted operating ranges and their instal-
lation requirements at all times.
Use the product only in accordance with the information provided in the user manual
and with the locally applicable standards and directives. Any other application may
cause personal injury or damage to property.
This quick installation guide does not replace the description in the user manual.
The contents of this guide may be updated or revised due to product development.
The information in this guide is subject to change without notice. The latest version
of this document and the manual for installation, commissioning, configuration and
decommissioning are to be found in PDF format at www.solplanet.net.
2.1 I
ntended use
SAFETY
2
GENERAL INFORMATION
1
1 QG0047_ASW45-60K-LT-G3_EN-540-300224-00_0223

2.2 Important safety instructions
The product has been designed and tested strictly according to the international
safety requirements. As with all electrical or electronical devices, there are residual
risks despite careful construction. To prevent personal injury and property damage
and to ensure long-term operation of the product, read this section carefully and
observe all safety information at all times.
DANGER
！
Danger to life due to high voltages of the PV array！
When exposed to sunlight, the PV array generates dangerous DC voltage which is
present in the DC conductors and the live components of the product. Touching
the DC conductors or the live components can cause to lethal electric shocks. If
you disconnect the DC connectors from the product under load, an electric arc
may occur leading to electric shock and burns.
• Do not touch non-insulated cable ends.
• Do not touch the DC conductors.
• Do not touch any live components of the product.
• Do not open the product.
• All work on the product must only be carried out by qualied personnel who have
read and fully understood all safety information contained in this document and
the user manual.
• Disconnect the product from voltage and energy sources and ensure it cannot be
reconnected before working on the product.
• Wear suitable personal protective equipment for all work on the product.
The product must only be used in countries for which it is approved by AISWEI and
the grid operator.
The type label must be permanently attached to the product and must be in a legible
condition.
This document does not replace any regional, state, provincial, federal or national
laws, regulations or standards that apply to the installation, electrical safety and use
of the product.
QG0047_ASW45-60K-LT-G3_EN-540-300224-00_0223 2

DANGER
！
Danger to life due to electric shock when touching live system com-
ponents in case of a ground fault！
If a ground fault occurs, parts of the system may still be live. Touching live parts
and cables may result in death or lethal injuries due to electric shock.
• Disconnect the product from voltage and energy sources and ensure it cannot be
reconnected before working on the device.
• Only touch the insulation of the cables of the PV modules.
• Do not touch any parts of the substructure or frame of the PV array.
• Do not connect PV strings with ground faults to the product.
WARNING
！
Danger to life due to electric shock from destruction of the mea-
suring device due to overvoltage！
Overvoltage can damage a measuring device and result in voltage being pres-
ent in the enclosure of the measuring device. Touching the live enclosure of the
measuring device results in death or lethal injuries due to electric shock.
• Only use measuring devices with the measurement span higher than the DC
input voltage range equal to or higher than the voltage rating of the product.
CAUTION
！
Risk of burns due to high temperature.
Some parts of the enclosure can become hot during operation.
• During operation, do not touch any parts other than the enclosure lid of the
product.
CAUTION
！
Risk of injury due to weight of product .
Injuries may result if the product is lifted incorrectly or dropped while being
transported or mounted.
• Transport and lift the product carefully. Take the weight of the product into
account.
• Wear suitable personal protective equipment for all work on the product.
3QG0047_ASW45-60K-LT-G3_EN-540-300224-00_0223

2.3 Symbols on the label
Beware of a danger zone
This symbol indicates that the inverter must be additionally grounded if additional
grounding or equipotential bonding is required at the installation site.
Beware of high voltage and operating current
The inverter operates at high voltage and current. Work on the inverter must only be
carried out by skilled and authorized electricians.
Beware of hot surfaces
The inverter may become hot during operation. Avoid contact during operation.
Capacitor discharge
Danger to life due to high voltages in the inverter. Do not touch live parts for 25 minu-
tes after disconnection from the power sources.
Observe the documentation
Observe all documentation supplied with the product.
25mins
WEEE designation
Do not dispose of the product together with the household waste but in accordance
with the disposal regulations for electronic waste applicable at the installation site.
CE marking
The product complies with the requirements of the applicable EU directives.
Certication mark
The product has been tested by TUV and got the quality certication mark.
RCM Mark
The product complies with the requirements of the applicable Australian standards.
QG0047_ASW45-60K-LT-G3_EN-540-300224-00_0223 4

EU DECLARATION OF CONFORMITY
3
Within the scope of the EU directives
• Radio Equipment Directive 2014/53/EU
(L 153/62-106. May 22. 2014) (RED)
• Restriction of the use of certain hazardous substances 2011/65/EU
(L 174/88, June 8, 2011) and 2015/863/EU (L 137/10, March 31,2015) (RoHS)
AISWEI Technology Co., Ltd. confirms here with that the products described in this
document are in compliance with the fundamental requirements and other relevant
provisions of the above mentioned directives. The entire EU Declaration of Confor-
mity can be found at www.solplanet.net.
5QG0047_ASW45-60K-LT-G3_EN-540-300224-00_0223

SCOPE OF DELIVERY
5
OVERVIEW
4
Inverter×1
1
1LED指示灯 指示逆变器当前的工作状态
No. Name
3
2DC connector inputs
DC-switch
4
5
6
WiFi stick port
Additional grounding screw
RS485 communication port
AC terminal
DC connector×10 WiFi stick×1
AC/COM cover×1
Mounting-bracket×1
Screw accessory ×1 AC insulation sheet×3 Document packagex1
12 34 6
5
PV1/40A
+- PV2/32A +-
PV4/40A
+- PV5/32A +-
PV3/32A
+-
QG0047_ASW45-60K-LT-G3_EN-540-300224-00_0223 6

MOUNTING ENVIRONMENT
6
√× √ √ × ×
IP66
4K4H
-25℃
+60℃
≤100%
max.4000m
≥500mm
≥500mm
≥500mm
≥500mm
≥500mm ≥500mm
No touching
by children
×
√× √× ×
＞75°
√
7QG0047_ASW45-60K-LT-G3_EN-540-300224-00_0223

DIMENSIONS
7
MOUNTING
8
Unit：mm
670
270
640
1
2
90°
123
456
4-Φ12
70mm
386
473
4-φ10
592
550
19mm
13 N · m
8.1 Mounting-bracket
QG0047_ASW45-60K-LT-G3_EN-540-300224-00_0223 8

SECOND PROTECTIVE GROUNDING
9
5
M5
2.5N
· m
1
2
8.2 Wall-Mounted Installation
M5
2.5N·m
123
OK
M5
2.5N · m
E
1
2
3
4
L=E+(2~3)mm L
90°
9QG0047_ASW45-60K-LT-G3_EN-540-300224-00_0223

AC CONNECTION
10
12
E
E
28-42mm
130mm
L1
L2
L3
N
PE
6
8
2
7
M4
1.6N
· m
8.5mm<Φ<10.5mm
34 5
9
M6
3.5N
· m
M8
12N
· m
QG0047_ASW45-60K-LT-G3_EN-540-300224-00_0223 10

1
2.5-6mm2
Φ-5 8mm
8-10mm
23
DC CONNECTION
11
4
OK
5
123
2.5-6mm2
Φ-5 8mm
≈12mm
click 1
2
√×
1
2
1
2
TYPE 1
TYPE 2
10 11
OK
M4
1.6N
· m
11 QG0047_ASW45-60K-LT-G3_EN-540-300224-00_0223

45
6
1
2
3
1
2
3
2
4
×
√
12.1 WiFi/LAN/4G stick connection
1
2
123
OK
7
5OK
COMMUNICATION SETUP
12
QG0047_ASW45-60K-LT-G3_EN-540-300224-00_0223 12

ABGABG
6
4/2
......
......
ON OFF ON
RS485 RS485
RS485
O
N
O
F
F
OK
12.2 RS485 cable connection
1
30~100mm
8mm
2
M4
1.6N
· m
1
4/1
ABGABG
O
F
F
O
N
5
M4
1.6N
· m
4
5
3
2
3
3-5.5mm
13 QG0047_ASW45-60K-LT-G3_EN-540-300224-00_0223

Please contact our Service Department if you have any technical questions about our
products.
The following information is needed to provide necessary assistance:
——Inverter model
——Inverter serial number
——Photovoltaic module model
——Photovoltaic modules number and strings number connected to each MPPT
——Fault code
——Installation location
——Warranty card
EMEA
Service email: [e-mail]
APAC
Service email: service.APA[email protected]
LATAM
Service email: service.LAT[email protected]
Aiswei Greater China
Service email: [e-mail]
Hotline: [phone]
Taiwan
Service email: [e-mail]
Hotline: [phone]
https://solplanet.net/contact-us
CONTACT
13
iOS
Scan QR code:
Android
Scan QR code:
QG0047_ASW45-60K-LT-G3_EN-540-300224-00_0223 14

AISWEI Technology CO., Ltd