Stanley TimerMax User manual

OPERATING INSTRUCTIONS
The first press of the
”Timer” button displays
the ON settings for the
1st program, the second
press– its OFF settings.
The third press displays
the ON settings for the
2nd program, and so on
to the twelfth press of the ”Timer” button, which
displays the OFF settings for the6th program.
You don’t need to use all six
“ ON/OFF ” programs.
This number shows
which program of
six is being viewed.
Read instructions carefully in order to set-up your TimerMax properly.
1PLUG THE TIMER INTO AN 125V OUTLET that is visually and manually
accessible. Allow built-in batteries to initially charge for ten minutes,
fully charge in five hours. [Once fully charged the battery will
remember your settings for up to six months.] If the display appears as
shown here (flashing), proceed to step 2. If not, press and release small “R/Reset” button
gently with a pencil point or opened paper clip.
2To SET CURRENT DAY AND TIME, the ” /Time” button must be
pressed and held, throughout this step. Press the ”Day” button until
the present day of the week appears. Do the same with the”h+”and
”m+” buttons to set the time. Note that either Aor Pappears in the
bottom right of display window to indicate AM or PM.
3To SET THE TIMER, press the ”Timer”button once and the display
will appear as shown here. Next, set the time [with the ”h+” and
”m+” buttons, as above] and day(s) you want your appliance/light
“ ON ” [refer to the Day button section on the bottom LEFT of this
page for a list of 11 different day(s) options]. Press the ”Timer”but-
ton a second time [note that OFF appears in the display] and set the
time and day(s) you want your appliance/light “ OFF ” . For more detail,
see examples on other side. This step can be repeated five times,
for a total of 6 “ ON/OFF ” programs.
4Press the ” /Time” button to return to current day and time display.
5Finally, plug your appliance/light into the timer. Be sure that the item plugged into the
timer is switched “ON”.
MO 12:00
OFF
MO TU WE TH FR SA SU
3:35
OFF P
MO TU WE TH FR SA SU
TIMER --:--
ON
This number
represents which
program of six is
being viewed.
1
140 58th Street, PO Box 67, Brooklyn, NY 11220
718-943-7000 • Toll Free 800-730-3707 •www.thencc.com
Day Timer
R
h+ m+
Time Timer Day h+ m+
Reset Override
TimerMax™TimerMaxOutdoor™
BUTTON FUNCTIONS
/Time – Set and display present day and time.
Timer –Set/view 6
“ ON/OFF ” programs.
Day – Set day(s). See eleven different settings
below [Hold for fast forward].
h+ – Set hours. [Hold for fast forward]
m+ – Set minutes. [Hold for fast forward]
/Override – Manual
“ ON/OFF ” . When this
button is pressed it will change the current state
from
“ OFF ” to “ ON ” or vice versa. When the next
programmed time is reached the timer will revert
to the programs control.
R/Reset – Clear all settings.
Timer button
1. MO TU WE TH FR SA SU – Daily
” ON/OFF “ settings will repeat every day.
2. MO will only operate Monday.
3. TU will only operate Tuesday.
4. WE will only operate Wednesday.
5. TH will only operate Thursday.
6. FR will only operate Friday.
7. SA will only operate Saturday.
8. SU will only operate Sunday.
9. MO TU WE TH FR – Weekday
will operate Monday to Friday.
10. SA SU – Weekend
will operate Saturday and Sunday.
11. MO TU WE TH FR SA – 6 Day
will operate Monday to Saturday.
Liquid Crystal Display (LCD)
TimerMax™/TimerMaxOutdoor™
MO TU WE TH FR SA SU
TIMER --:--
ON
1
Day button settings for Timer mode
HINTS and TIPS
(The rechargeable battery in the timer should be charged first by plugging it into a
regular household outlet (125V) for ten minutes.
(Ensure the “ON/OFF” switch on your appliance or light is in the “ON” position when
connected to the timer.
(Do not expose the timer to extremely high or low temperatures. Do not place in
direct sunlight.
(TimerMax is for indoor use only. TimerMax Outdoor is weatherproof.
(Display is clearer when viewed from above.
(To fast forward, press and hold the “h+”, “m+” or “Day” button.
(Check your programmed times by pressing the “Timer” button (up to 12 commands
available).
(Ensure the hour has been set correctly to AM or PM, indicated either by Aor P.
(For any given day and time, if one program is set to ON, and another program OFF,
TimerMax will turn your appliance/light OFF.
(Return to the clock function by pressing the “ /Time“ button.
is the trademark of The Stanley Works and Subsidiaries. Produced under license by The NCC, Brooklyn, New York.
DO NOT EXCEED 1875 WATT, 15 AMP MAX. LOAD
Customer Service Assistance
Toll Free 800-730-3707
http://waterheatertimer.org/Woods-timers-and-manuals.html#6-week

TimerMax™/TimerMaxOutdoor™
If within the first year from date of purchase, this unit fails due to a defect, exchange
where purchased, or ship it prepaid with proof of purchase to THE NCC, 140 58th Street,
PO Box 67, Brooklyn, New York 11220. Units that fail to operate during the second or
third year from date of purchase must be shipped prepaid with proof of purchase
to THE NCC. We will replace unit. This guarantee excludes normal wear and tear
and damage resulting from accident, alteration, or misuse.
Three Year Power Warranty
aPress ”Timer” button once to show:
bPress ”h+ ”button until 8:-- pm
appears. Note that the small P
at the bottom right of display
window shows PM.
cPress ”m+” button until 8:10 pm
appears.
dPress ”Timer” button again to set
the OFF time, display will now
show:
ePress ”h+” button until 11:00 pm
appears:
fPress ”m+” button until 11:06 am
appears:
MO TU WE TH FR SA SU
TIMER --:--
ON
1
MO TU WE TH FR SA SU
TIMER --:--
OFF
1
MO TU WE TH FR SA SU
TIMER 8:--
ON
1P
MO TU WE TH FR SA SU
TIMER 8:10
ON
1P
MO TU WE TH FR SA SU
TIMER 11:--
OFF
1P
MO TU WE TH FR SA SU
TIMER 11:06
OFF
1P
Example A
To switch an appliance or light “ON”
every day of the week at 8:10 pm
and “OFF” at 11:06 pm follow the
steps below:
Example B
To switch an appliance or light “ON” at 1:30 pm
Saturday and “OFF” at 7:15 am Monday follow the
steps below. [Let’s assume you have already set
timer program 1, and now want to set another].
aPress ”Timer” button
until program 2appears.
This is the next available
“ON” program:
bRepeatedly press ”Day”
button until SA
(Saturday) appears:
cPress ”h+” button until
1:-- pmappears.
dPress ”m+” button until
1:30 pmappears.
ePress ”Timer” button
again to set the OFF
time, display will now
show:
fRepeatedly press ”Day”
button until MO
(Monday) appears:
gPress ”h+” button until
7:-- amappears.
hPress ”m+” button until
7:15 amappears.
The first press of the
”Timer” button displays
the ON settings for the
1st program, the second
press– its OFF settings.
The third press displays
the ON settings for the
2nd program, and so on
to the twelfth press of the ”Timer” button, which
displays the OFF settings for the 6th program.
You don’t need to use all six “ ON/OFF ” programs.
This number shows
which program of
six is being viewed.
/Time – Set and display present day and time.
Timer –Set/view 6 “ ON/OFF ” programs.
Day – Set day(s). See eleven different settings
below [Hold for fast forward].
h+ – Set hours. [Hold for fast forward]
m+ – Set minutes. [Hold for fast forward]
/Override – Manual “ ON/OFF ” . When this
button is pressed it will change the current state
from “ OFF ” to “ ON ” or vice versa. When the next
programmed time is reached the timer will revert
to the programs control.
R/Reset – Clear all settings.
Timer button
1. MO TU WE TH FR SA SU – Daily
” ON/OFF “
settings will repeat every day.
2. MO will only operate Monday.
3. TU will only operate Tuesday.
4. WE will only operate Wednesday.
5. TH will only operate Thursday.
6. FR will only operate Friday.
7. SA will only operate Saturday.
8. SU will only operate Sunday.
9. MO TU WE TH FR – Weekday
will operate Monday to Friday.
10. SA SU – Weekend
will operate Saturday and Sunday.
11. MO TU WE TH FR SA – 6 Day
will operate Monday to Saturday.
MO TU WE TH FR SA SU
TIMER --:--
ON
1
Day button settings for Timer mode
MO TU WE TH FR SA SU
TIMER --:--
ON
2
SA
TIMER --:--
ON
2
SA
TIMER -1:--
ON
2P
SA
TIMER 1:30
ON
2P
MO TU WE TH FR SA SU
TIMER --:--
OFF
2
MO
TIMER --:--
OFF
2
MO
TIMER 7:--
OFF
2A
MO
TIMER 7:15
OFF
2A
Your timer is set to go “ON” every
day of the week at 8:10 pm and
“OFF” at 11:06 pm.
Your timer is set to go “ON” at 1:30 pm Saturday
and “OFF” at 7:15 am Monday.
Here below, are step-by-step instructions for setting your timer in two different examples:
Day Timer
R
h+ m+
Time Timer Day h+ m+
Reset Override
TimerMax™TimerMaxOutdoor™
Liquid Crystal Display (LCD)
DO NOT EXCEED 1875 WATT, 15 AMP MAX. LOAD
Customer Service Assistance
Toll Free 800-730-3707