Steelcase 41-ATT Firmware update

Steelcase, Inc.
Grand Rapids, MI 49501
U.S.A.
1-800-227-2960
Tools
Assembly Directions
Consignes de montage
Instrucciones para el ensamblaje
Printed In U.S.A.
Imprime aux Etats-Unis d’Amerique
Impreso en EE.UU.
REV
93-9504398 -
Page 1 of 4
3/16”
Wood Assembly Only
Machine & typewriter Unit Attachment (41-ATT) Attached To 3200 Desk

#10-24 x 3/8"
Machine Screw
Bottom Panel
Plate
Back Panel
Hex Nut
Desk Leg
(Ref. Only)
Assembly Directions
93-9504398 REV - Page 2 of 4
2Install Back Panel
1Install End Panel
3Install Bottom Panel Plate
3/32"
2
1
Attach To Back Panel Only
At this Point.

2300/3200
2300/3200
5200
4Remove Pull and Install Mounting
Bracket, 2300, 3200 only.
4a
5Install Hanger Bracket
2
1
3
4
4
Tabs
Reuse
Washers
5
5
6
7
89
2300 - 3200
5200
Reuse Washers
Assembly Directions
93-9504398 REV - Page 3 of 4
Remove Outerhead
•(1) Remove Screw each side of outerhead
•(2) Push downward to unlock outerhead on drawer front
•(3) Pull out on outerhead
•(4) Remove Screws & washer from handle assembly
Save washers to reuse
Replacing Outerhead
•(5) Install outerhead Bracket
•(6) Align tabs on outerhead to inside of drawer tabs
•(7) Push upwards to lock outerhead on drawer front
•(8) Adjust drawer and outerhead for proper fit
•(9) Secure with (1) #8 Screw each side

Assembly Directions
93-9504398 REV - Page 4 of 4
6Install Return Unto Desk
NOTE:
Drill 3/16” Hole at location A & B
(For Wood Only)
Clip Angle Hanger Bracket
1/4” x 1” Screw
DESK
BACK PANEL A
B
Desk
#10 x 1/2 Screw
Return Unit
Back Panel Plate
7Installation of Bottom Panel Bracket