Steelcase Arbor User manual

#2 Posi Driver
Steelcase customer
service part number
YFS3534C
Arbor - Installation of Stacking Bookcases onto a Credenza
#30 Drill Bit
Page 1 of 4
Y9501721 Rev. D
If you have a problem, question, or request, call
your local dealer, or Steelcase Line 1 at
(888.783.3522)
for immediate action by people who want to help you.
888.STEELCASE
© 2002 Steelcase Inc.
Grand Rapids, MI 49501
U.S.A.
(Outside the U.S.A. Canada, Mexico, Puerto Rico,
and the U.S. Virgin Islands, call: 1.616.247.2500)
Or visit our website: www.steelcase.com
Printed in the U.S.A.
Power Driver
with Phillips tip
Stacking Bookcase with Doors
Open Bookcase
(shown in this direction)

Page2of4
Y9501721 Rev. D
1-1/8”
(28.6 mm)
31-1/8”
(791 mm)
4-1/4”
(108 mm)
8-13/16”
(224 mm)
1.
2.
1
2
Locate and drill (4) holes
5/8” (16 mm) deep using a
5mm drill bit.
Install (4) steel dowels into holes.

Page3of4
Y9501721 Rev. D
3.
4.
5.
6.
A
B
Gently lay bookcase onto it’s side.
Cut felt strips to length and apply
to bottom of bookcase as shown.
position bookcase over credenza
so that holes in end panels are aligned
with steel dowels.
Carefully
A. Lower bookcase onto credenza.
B. Insert (4) cam locks into holes.
C. Secure with a half turn.
C
ARROW UP
Be sure to leave access
for holes, both sides
4
3
5
6

Page4of4
Y9501721 Rev. D
#2 Posi Driver recommended
REAR SCREW - IN/OUT
MIDDLE SCREW - UP/DOWN
FRONT SCREW - SIDE TO SIDE
DOOR HINGE
DOOR ADJUSTMENT