Steelcase On-Module Pedestal Filler User manual

Page 1 of 8
939503239 Rev F
®
If you have a problem, question, or request, call
your local dealer, or Steelcase Line 1 at
888.STEELCASE (888.783.3522)
for immediate action by people who want to help you.
(Outside the U.S.A., Canada, Mexico, Puerto Rico,
and the U.S. Virgin Islands, call: 1.616.247.2500)
Or visit our website: www.steelcase.com
©2003 Steelcase Inc.
Grand Rapids, MI 49501
U.S.A.
Printed in U.S.A.
On-Module Pedestal Filler Installation
For Use With Montage®
Components
Filler Bracket
#10-16 x 1/2"
Self Drilling Screw
(GQTFC)
Stamped
"M"
For Package of all
Components above
Proud Front Pedestals (RPXFMONPP)
Flush Front Pedestals (RPXFMONFP)
Stamped
"MF"
Proud Front
Pedestals
Flush Front
Pedestals
M
MF
NOTE: These pedestal fillers provide only limited stability for
panels. They may not be substituted for end panels when upper
storage is used. See specification guide for application topics.
NOTE: For pedestals manufactured prior to Feb 2004,
see assembly direction 939504417.

Page 2 of 8
939503239 Rev F
1. A. For left hand pedestal applications 
 break off the tab marked "R".
 B. For right hand pedestal applications 
 break off this tab, keeping the tab
 marked "R".
 NOTE: Right hand pedestal application 
 shown in step 2.
2. Place the filler against the back of the
pedestal. Line up the top hole and bottom
hole of the filler with the pilot dimples on the
top and bottom of the back of the pedestal.
2
FILLER
1a
1b
PILOT
DIMPLE
PILOT
DIMPLE
FILLER

Page 3 of 8
939503239 Rev F
3. Fasten the filler to the back of the
pedestal by using five (5) 1/2" self-drilling
screws and following the sequence
indicated.
3b 3d
3a
3c
3e

Page 4 of 8
939503239 Rev F
4. Pull drawer forward.
5. Push on tab on each side of the
drawer rails.
6. Remove drawer completely.
4
6
7
5
7. Push drawer rails back into
pedestal.
8. Remove remaining drawers.

TIP: Mark all drawers so they can be
easily re-installed in their original
positions.

Page 5 of 8
939503239 Rev F
9. Move pedestal toward the wall
and engage the hook on the filler into
the slot in the panel.
9

Page 6 of 8
939503239 Rev F
10. Adjust pedestal glides until
they contact the floor.
11. Place worksurface onto the
pedestal.
10
11

Page 7 of 8
939503239 Rev F
12. Attach worksurface to pedestal
by fastening four (4) 1" pan head
screws (855010168MP) through the
pedestal body and mount to the
bottom of the worksurface.
12
1" PAN HEAD
SCREWS

Page 8 of 8
939503239 Rev F
3
1
2
Drawer Re-Assembly

NOTE: Remember to re-install drawers in their
original positions.

1. Verify that drawer rails are pushed back into
pedestal.

2. Pull ball cages on drawer rails to front of
drawer rails.

3. Carefully align drawer portion of rail with ball
cage of pedestal portion of rail and gently push
drawer back into pedestal.

TIP: Failure to re-assemble drawers correctly
may damage rails, rendering them non-functional.