Steelcase 2300 Series User manual

If you have a problem, question,
or request, call your local dealer,
or Steelcase Line 1 at
888.STEELCASE (888.783.3522)
for immediate action by people
who want to help you.
(Outside the U.S.A., Canada,
Mexico, Puerto Rico, and the
U.S. Virgin Islands, call:
1.616.247.2500)
Or visit our website
www.steelcase.com
©1998 Steelcase Inc.
Grand Rapids, MI 49501
U.S.A.
Printed in U.S.A.
1
of
6
939500845 Rev B
Field Installed 2300 and 3300 Series Individual Pedestal Lock

2
of
6
939500845 Rev B
1. Pull Box drawer out until it stops and lift up
and out.
2. Pull Box drawer out until it stops, raise up
slightly on drawer head and continue to pull
drawer out.
NOTE: It may be necessary to hold the cradle in
position when disengaging the drawer from the
cradle.

3
of
6
939500845 Rev B
3. Cut out template on page 5 or 6 and align
onto pedestal. Center punch exact location and
drill 3/4” Dia. Hole.
4. Install lock.
5. Place end of lock rod through hole in lock bar.
Install Lock bar behind case channels. 4.
3.
5.

4
of
6
939500845 Rev B
6. Insert lock rod into lock cam. Secure assembly
to lock and attach spring.
7. Remove drawer from opposite pedestal per
Step 1 and 2. Remove all screws attaching
pedestals and pack panel to top. Lift end of desk
top. Slip lock guard over side of pedestal and
install tab on guard into slot in side of pedestal.
Re-install all screws and drawers.
7.
6.

Front Edge of Pedestal
Top of Pedestal
Front Edge of Pedestal
Cut on Dotted Line
- IMPORTANT -
Use this template on desks manufactured prior to 9-17-79
3 - 17/32"
2 - 1/2"
Top of Pedestal
5
of
6
939500845 Rev B

6
of
6
939500845 Rev B
Front Edge of Pedestal
Top of Pedestal
Front Edge of Pedestal
Cut on Dotted Line
- IMPORTANT -
Use this template on desks manufactured prior to 9-17-79
2 - 1/2"
Top of Pedestal
4 - 15/32"