Steelcase Solo User manual

Better work is just 4 steps away
Worksurface (top and frame) Columns
Feet
Bag with screws,
side covers and tool
Pick a location where there is enough room between the desk and other
nearby objects.
As you open the boxes, review the content and different elements.
You can simply remove the cover off the large box and start the assembly
process inside the open box.
Keep the worksurface adjustment range clear of obstructions.
Don't sit or stand all day. Both can take a toll on your body. Instead,
try alternating between postures every 1-2 hours.
For additional details, please reference the Assembly Directions and User
Guide that is also included in this box.
If you’d rather watch a video on how to assemble your new desk, scan
the QR code below. All rights reserved. All specifications subject to change without notice.
Enjoy your new Solo Sit-to-Stand Desk!
What's included
Box 1 Box 2
Some helpful tips
To find out more about solutions
for new ways of working,
visit Steelcase.com
Solo
Sit-to-Stand
Desk
Quickstart
Guide
[phone]
Risk of Electrical Shock, Fire, Serious Injury or Death.
Raising or lowering the desk can crush or trap body parts. Read all instructions
before using this furnishing. Do not allow use by children or untrained people.
Steelcase.com

Flip the desk over, being cautious of the mounted switch on the underside.
Adjust the levelling glides if needed, connect to power and you're done!
Tip: Keep the top inside the packaging.
The right positioning of the columns is indicated
through the little cut-outs on top of the column.
Tip: The cables are connected correctly when
you hear a click sound. Make sure to tighten
the screws tightly with the supplied tool, as that
has a direct impact on the stability of the desk.
Tip: Remove the plastic screws
(transportation lock) before tightening
the metal screws.
Attach the columns
to the frame
Connect the cables
and tighten the screws
Assemble
the feet
Get to work
A
B
CLICK
A
B
A
B
C2x