Steelcase Universal Hard Surface Screen User manual

If you have a problem, question, or request, call
your local dealer, or Steelcase Line 1 at
888.STEELCASE (888.783.3522)
for immediate action by people whowant to help you.
(Outside the U.S.A., Canada, Mexico, Puerto Rico,
and the U.S. Virgin Islands, call: 1.616.247.2500)
Or visit our website: www.steelcase.com
©2021 Steelcase Inc.
Grand Rapids, MI 49501
U.S.A.
Printed in U.S.A.
®
Page 1 of 4
157588 Rev B
Universal Hard Surface Screen Worksurface Rear & Side Mount
Application Assembly Instructions
1x
#2 SQUARE
REAR BRACKETS
SIDE BRACKETS
NOTE: Keep screen on a flat
surface, do not stand screen
on end.

®
Page 2 of 4
157588 Rev B
Universal Hard Surface Screen
8x
1. Lay and center screen on worksurface.
2. Position and align brackets to the screen
(approx. 3-1/2" from screen edges).
3. Attach brackets to underside of the
worksurface with the supplied fasteners.
NOTE: Screen should not extend beyond
worksurface.
NOTE: For screen width 22" or less, the
recommended bracket position is 1" from
screen edge.
#2 SQUARE

®
Page 3 of 4
157588 Rev B
Universal Hard Surface Screen
(continued...)
NOTE: talfgnoladellatsnineercS
edge profile only.
FLAT EDGE
PROFILE EDGE
3-1/2"
TOP EDGE OF
HARD SURFACE
SCREEN

®
Page 4 of 4
157588 Rev B
Universal Hard Surface Screen
(continued...)
>72"
NOTE: 3 brackets are required
for fluted panel longer than 72".