Steelcase Universal Shelf User manual

Universal Shelf and Universal Personal Shelf
#2 Quad Drive Bit
2
3
4
If you have a problem, question, or request, call
your local dealer, or Steelcase Line 1 at
888.STEELCASE (888.783.3522)
for immediate action by people who want to help you.
(Outside the U.S.A., Canada, Mexico, Puerto Rico,
and the U.S. Virgin Islands, call: 1.616.247.2500)
Or visit our website: www.steelcase.com
©2007 Steelcase Inc.
Grand Rapids, MI 49501
U.S.A.
Printed in U.S.A.
Universal Shelf
Use on:
• Technology Wall
• Answer
• kick
• Series 9000
• Montage
• Avenir
Universal Personal Shelf
Use on:
• Technology Wall
• Answer
• kick
• Series 9000
• Avenir Page 1 of 4
939501638 Rev C
(AVENIR ONLY)
(AVENIR ONLY)
• ap40

Page 2 of 4
939501638 Rev C
End Bracket Identification
Universal Shelf Personal Shelf
End Brackets
for Montage
Right Hand 
(RH)
Left Hand 
(LH)
Right Hand 
(RH)
Left Hand 
(LH)
Look for these identifiers

TAK = Technology Wall
 Answer
 kick
AV = Avenir
9= Series 9000 / ap40
M= Montage
NOTE:
Use proper brackets to achieve
intended look and function.

1
1. Insert LH/RH end brackets hooks into panel
upright slots. (See page 2 for bracket identification).
2. Verify full engagement of safety catches by
lifting up on the installed brackets.
end brackets.
3b. Make sure the support brackets engage 
the back stop.
4. Attach shelf to end brackets with two 
#8 x 3/8" screws at front corners.
5. Stabilize adjoining shelves with #8 x 3/8"
screws and tie strap under front edge.
6. To remove shelf, release both end bracket
safety catches and lift shelf upward and away
from the panel.
3a
SUPPORT BRACKET
2
TIE STRAP
4
5
NOTE:
Larger shelves may
require two people.
TIP:
Disassembly of a Series 9000
shelf may aid reconfiguration
installation.
Universal Shelf
Use on:
• Technology Wall
• Answer
• kick
• Series 9000
• ap40
END BRACKET (LH)
END BRACKET (RH)
Page 3 of 4
939501638 Rev C
3a. Position shelf between and on top of
(SERIES 9000)
NOTE: Tap into position with mallet for Series 9000.
ENGAGED
POSITION
RELEASED
POSITION
SAFETY
CATCH
#8 x 3/8" SCREW
6
#8 x 3/8" SCREW
*
*
*
*
BACK STOP
SUPPORT
BRACKET
HOLE SET FOR TWO 48" PANELS
HOLE SET FOR 48" AND 60" PANEL
HOLE SET FOR TWO 60" PANELS
(AVENIR)
3b
• Montage
• Avenir

1
1. Insert LH/RH end brackets hooks into panel
upright slots. (See page 2 for bracket identification).
2. Verify full engagement of safety catches by
lifting up on the installed brackets.
3. Position shelf between and on top of 
end brackets and firmly seat.
4. Attach shelf to end brackets with two 
#8 x 3/8" screws at front corners.
5. Stabilize adjoining shelves with #8 x 3/8"
screws and tie strap under front edge.
6. To remove shelf, release both end bracket
safety catches and lift shelf upward and away
from the panel.
3
4
5
NOTE:
Larger shelves may
require two people.
TIP:
Disassembly of a
Series 9000 shelf may
aid reconfiguration
installation.
Universal Personal Shelf
Use on:
• Technology Wall
• Answer
• kick
• Series 9000
• Avenir
END BRACKET (LH)
END BRACKET (RH)
Page 4 of 4
939501638 Rev C
2
ENGAGED
POSITION
RELEASED
POSITION
SAFETY
CATCH
6
(SERIES 9000)
NOTE: Tap into position with mallet for Series 9000.
#8 x 3/8" SCREW
#8 x 3/8" SCREW
TIE STRAP (AVENIR)
SEE PAGE 3 FOR USE