SUGATSUNE Zwei L ZL-2402 User manual

1
Strike plate
Thank you for selecting our product. Before starting installation,
please read this manual thoroughly to ensure correct installation.
Please keep this manual at hand for future reference.
Sliding door latch
Strike box
Provided screws Q'ty for glass door
t10 - 13 for wood door
t33 - 37 t38 - 42 t43 - 45
Attached to
latch
3 M4×20 M4×45 M4×50 M4×55
1 M3×10
2M3×8
Attached to
strike box
2 M5×20 M5×45 M5×50 M5×55
1 M3×16
2M3×8
Hexagon socket
countersunk
head screw
Item No. ZL-2402-FB
Provided screws: Countersunk
tapping screw
3x20 … 3 pcs
Sliding Door Latch, Model ZL-2402
Installation Instruction
●Sliding door latch with thumb turn and indicator
●Closing mechanism leaves no gap between door and doorjamb.
●
Safety mechanism allows the hook to work only when the door is closed.
●Hook and trigger don't protrude when the door is opened.
ABOUT THE PRODUCT
FOR YOUR SAFE WORK AND CORRECT INSTALLATION
Caution
Make sure to follow the designated measurements, specifications, and horizontal/vertical angles. Make sure that the frame is not
warped, since it may affect the movement of the door.
This product is a part for architectural fittings. After installation, make sure to test the finished product thoroughly to ensure that
it is well-functioning and safe.
Make sure to check the screws for slack at regular intervals (one month from first usage, half a year, and then one time every year
is recommended).
Prohibited
Warning
Caution Required
Meaning of symbols
If not followed injury or damage may result.
PARTS COMPOSITION
OPTIONAL PARTS
Attached tools: Hex key 3 mm. See table below for the attached screws.
Item No.:ZL-2402 ＊＊
( ＊＊LV¿QLVKFRGH6HHWKHWDEOHEHORZ
Provided tools: Hex key 2 mm, 2.5 mm.
See table below for the provided screws.
⑬
Strike plate
（ZＬ-2402-Gonly） （ZＬ-2402-Wonly）
③Indicator ①Housing ②Latch body ④Face plate ⑤Inner plate
⑥Inner plate ⑦Gasket
2 pcs
⑧Strike box ⑨Strike body ⑩Cover ⑪Strike ⑫Gasket
2 pcs
,WHP1R=/*IRUJODVVGRRUWKLFNQHVVPP
=/:IRUZRRGGRRUWKLFNQHVVPP

2
80
62
6.5 6.5 16.5 20.3
16.5
64 112
80
I48
3xI5、I7
3.4
7.4
21.2
63
80
32
6.5
2
12
32
Sliding door latch (for glass door)
Indicator side (as locked)
Strike box
Thickness:
10 - 13 mm
Strike plate
Sliding door latch (for wood door)
Thickness:
33 - 45 mm
See installation procedure about the process dimensions.
Installation drawing
Emergency release
Use coin or similar to unlock the latch.

3
󱫀󱫀
󱫂󱫂
INSTALLATION PROCEDURE (for glass door)
Strike side Latch body side
(Door thickness: 10 - 13 mm)
■Assembly of strike box ■Installation of latch
Tightening torque
※1：0.5 - 0.7 N・ｍ
※2：0.9 - 1.4 N・ｍ
See page 4 about the mounting of strike plate.
※2
※1
⑧Strike box
⑨Strike body
⑫Gasket
⑩Cover
Hexagon socket countersunk head screw M5x20
For wood door, choose suitable length according
to the table on page 1.
Hex key 3 mm
⑦Gasket
Hexagon socket
countersunk head screw
M4x20
Hex key 2.5 mm
②Latch body
①Housing
③Indicator
Hexagon socket
countersunk head screw
M3x16
Hexagon socket
countersunk head screw
M3x8
⑪Strike
Hex key 2 mm
(attached to sliding door latch) Hex key 2 mm
Hexagon socket
countersunk head screw
M3x8
Hexagon socket
countersunk head screw
M3x10
⑤Inner plate
④Face plate
Strike box and latch body alignment: ±3 mm
41
48
2I12
Process dimensions
74
I45
11
R30
Process dimensions

4
SUGATSUNE KOGYO CO.,LTD
Tokyo, JAPAN
Phone: [phone] E-mail:[email protected]
SUGATSUNE KOGYO (UK) LTD
Reading, UK
Phone: [phone] E-mail:[email protected]
SUGATSUNE EUROPE GmbH
Dusseldorf, GERMANY
Phone: [phone] E-mail:[email protected]
SUGATSUNE SHANGHAI Co., LTD
Shanghai, CHINA
Phone: [phone] E-mail:[email protected]
Guangzhou, CHINA
Phone: [phone] E-mail:[email protected]
SUGATSUNE KOGYO INDIA PRIVATE LIMITED
Mumbai, INDIA
Phone: [phone] E-mail:[email protected]
SUGATSUNE AMERICA, INC
California, USA
Phone: [phone] E-mail:[email protected]
Chicago, USA
Phone: [phone] E-mail:[email protected].
SUGATSUNE CANADA, INC.
Phone: [phone] E-mail:[email protected]
2018.08 1220-1
󱫀
󱫂
20
5.5
8
63
31.5
80
Process dimensions
Recessed mount
Max. R3
Depth
2 mm
⑬Strike plate
Countersunk
tapping screw 3x20
Recessed mount
Common center line
Surface mount
Surface mount
41
2I12
I8.5
10.5
74
I40
48
Process dimensions Process dimensions
INSTALLATION PROCEDURE (for wood door)
■Assembly of strike box
'RRUWKLFNQHVVPP
■Installation of latch
Strikeside Latch body side
Assembly process is the same as
JODVVGRRU6HHSDJH
■Assembly of strike plate
Tightening torque
※
1
：0.5 - 0.7 N・ｍ
※
2
：0.9 - 1.4 N・ｍ
※2
※1
②Latch body
⑦Gasket
③Indicator
Hexagon socket countersunk head screw M4
Choose suitable length according to the table
on page 1.
Hex key 2.5 mm
①Housing
Hex key 2 mm
Hexagon socket
countersunk head screw
M3x8
Hexagon socket
countersunk head screw
M3x10
④Face plate
⑥Inner plate
Strike box and latch body alignment: ±3 mm
󱫀