Sunjoy A102009100 User manual

Country of Origin: China Production Number: xxxxxxxxxx
ITEM NO.：A102009100
WE HAVE YOU IN MIND, LET US SERVE YOU!
Questions?
Issues?
CONTACT US
24 hours / 7 days a week
www.sunjoyonline.com
1-(866)-578-6569
[email protected]

2/ 25
Country of Origin: China
Table of Contents
Table of Contents..........................................................2
Safety Information.........................................................2
Warranty.........................................................................2
What is Covered.......................................................................2
What is Not Covered ................................................................2
Pre-Assembly ................................................................ 3
Planning Assembly...................................................................3
Hardware Included...................................................................3
Package Contents ....................................................................4
Assembly ....................................................................... 7
Care and Cleaning ........................................................ 8
1. More than six people are required for this assembly.
2. Some parts may contain sharp edges. Wear protective
gloves.
3. When assembling and using this product, basic safety
precautions should always be followed to reduce the risk of
personal injury and damage to equipment. Please read all
instructions before assembly and usage.
DANGER: This unit is heavy! Do not assemble this item
alone.
WARNING: While this gazebo is manufactured to
withstand winds through only the supplied ground stakes, in
areas subject to frequent severe weather, securing the
gazebo to a deck, concrete patio or footings should be
considered.
Snow must be cleared off regularly during snowy days.
Remove the snow at the top when it is thicker than 4 inches.
In order to avoid damage, use a plastic snow rake to remove
excessive snow and ice buildup from roof and keep away
from falling debris.
1YEAR WARRANTY
WHAT IS COVERED
This limited warranty is extended to the original purchaser and applies to defects in materials and workmanship of your item provided the
item is maintained with care and used only for personal, residential purposes. The item is warranted to be free from defects in material or
workmanship for a period of 1years.
WHAT IS NOT COVERED
We do not reimburse for transportation of delivery costs, or compensate the individual or any outside party for assembling or disassembling
the product.
Safety Information
NOTICE: For outdoor use only.
WARNING: Keep all flame and heat sources away from
this gazebo fabric. This Gazebo is made with fabric that
meets CPAI-84 specifications for flame resistance. It is not
fire proof. The fabric will burn if left in continuous contact
with any flame source. The application of any foreign
substance to the gazebo fabric may render the
flame-resistant properties ineffective.
Warranty
CAUTION: Do not climb on top of the gazebo. Falling off
the gazebo can result in serious injury, possibly even death.

3/ 25
Country of Origin: China
Pre-Assembly
PLANNING ASSEMBLY
Before beginning assembly of this product, make sure all parts are present. Compare parts with the Hardware Included
and Package Contents lists. If any part is missing or damaged, do not attempt to assemble the product.
Contact customer service for replacement parts.
HARDWARE INCLUDED
NOTE: Hardware not shown to actual size.
AA BB CC DD EE
GG HH II
JJ KK LL WW
Part Part Number Description Quantity Additional hardware
AA H010020012 M6 * 20 Bolt 68 4
BB H050010020 M6 Flat washer 294 15
CC H010020011 M6 * 15 Bolt 112 6
DD H010020025 M6 * 60 Bolt 12 1
EE H040010004 M6 Nut 28 2
GG R079990135 Plastic ring 52 3
HH H070010003 Dia. 8 * 180 Stake 8 0
II H010020021 M6 * 70 Bolt 2 1
JJ H010020024 M6 * 75 Bolt 16 1
KK H010020022 M6 * 40 Bolt 56 3
LL H050020016 Spring washer 72 4
WW H090010017 Wrench 2 0

4/ 25
Country of Origin: China
Pre-Assembly (continued)
PACKAGE CONTENTS
out
out
out
out
out
A1
C
D3
D4
E3
E4
F1
G1
G2
H1
B1
I2
J4
J6
K
L
M
N
P1
P2
J5

5/ 25
Country of Origin: China
Pre-Assembly (continued)
Q2
R1
R2
R3
R4
S1
S2
S3
Q3
T7
T8
U
V
W1
W2
W3
W4
T5
Q1
T6

6/ 25
Country of Origin: China
Pre-Assembly (continued)
Part Part Number Description Quantity
A
1 P000200311 Post 4
B1 P000100191 Stake base 4
C P006100120 Stake cover 4
D3 P000400666 Long cross beam (Left) 2
D4 P000400667 Long cross beam (Right) 2
E3 P000400664 Short cross beam ( Right ) 2
E4 P000400665 Short cross beam ( Left ) 2
F1 P000500786 Slanting beam connector 4
G1 P000500787 Middle beam connector 1 4
G2 P000500788 Middle beam connector 2 4
H1 P000600970 Slanting beam 4
I2 P000600972 Middle beam 2 4
J4 P000500784 Big top long connector tube 2
J5 P000500783 Big top short connector
tube 2
J6 P000500785 Big top connector 4
K
P000600969 Small roof support beam 4
L P000500782 Small roof connector 1
M P000800167 Small roof cover 1
N P005800130 Hoo
k
1
P1 P000700395 Small roof long panel 2
P2 P000700394 Small roof short panel 2
Q1 P000700400 Big roof short side upper panel 2
Q2 P000700401 Big roof short side bottom
panel (Left) 2
Q3 P000700402 Big roof short side bottom
panel (Right) 2
R1 P000700396
Big roof long side upper panel
(Left) 2
R2 P000700397
Big roof long side upper panel
(Right) 2
R3 P000700398
Big roof long side bottom panel
(Left) 2
Part Part Number Description Quantity
R4 P000700399
Big roof long side bottom panel
(Right) 2
S1 P000800168 Small roof support beam cover 4
S2 P000800169 Slanting beam cover 4
S3 P000800170 Middle beam cover 4
T5 P005700286 Long pipe 1 2
T6 P005700287 Long pipe 2 2
T7 P005700288 Short pipe 1 2
T8 P005700289 Short pipe 2 2
U P005000268 Curve support 8
V
P001200124 Mosquito netting 1
W1 P000600973 Big roof long side beam 4
W2 P000600975 Big roof short side beam 4
W3 P000600974 Big roof long side lower beam 4
W4 P000600976 Big roof short side lower beam 4

7/ 25
Country of Origin: China
Assembly
1Attaching the Stake Bases and Slanting Beam Connectors
Slide the Stake covers (C) over the Posts (A1). Attach the Stake bases (B1) to the Posts (A1) using Bolts (CC) and Flat washers (BB).
Attach the Slanting beam connectors (F1) to the top of the Posts (A1) using Bolts (AA) and Flat washers (BB).
NOTE: To avoid destroying the finish, do not put the parts on the ground directly.
4X
4X 4X 4X
20X 8X
12X

8/ 25
Country of Origin: China
Assembly
2Connecting the Cross Beams
Attach the Middle beam connectors 1 (G1&G2) on the Cross beams (D3&D4, E3&E4) using Bolts (JJ), Flat washers (BB), Spring washers (LL),
and Nuts (EE). Tighten the bolts.
NOTE: To avoid destroying the finish, do not put the parts on the ground directly.
2X
2X
16X
2X
2X
4X
4X
16X 16X
32X

9/ 25
Country of Origin: China
Assembly
3Attaching the Cross Beams
Attach the assembled Cross beams (D3&D4, E3&E4) to the Posts (A1) using Bolts (AA), Flat washers (BB) and Spring washers (LL). Tighten
the bolts.
NOTE: To avoid destroying the finish, do not put the parts on the ground directly.
24X 24X 24X

10 / 25
Country of Origin: China
Assembly
4Attaching the Curve Supports
Attach the Curve supports (U) to the Posts (A1) and Cross beams (D3&D4, E3&E4) using Bolts (KK), Flat washers (BB) and Spring washers
(LL). Tighten the bolts.
NOTE: To avoid destroying the finish, do not put the parts on the ground directly.
32X 32X
32X
8X

11 / 25
Country of Origin: China
Assembly
5Connecting the Big Roof
Assemble the Big top connector tubes (J4&J5) with the Big top connectors (J6) using Bolts (CC) and Flat washers (BB). Tighten the bolts.
16X 16X
2X
4X
2X
NOTE: To avoid destroying the finish, do not put the parts on the ground directly.

12 / 25
Country of Origin: China
Assembly
6Attaching the Slanting Beams
Connect the top of the Slanting beams (H1) with the Big top connectors (J6) using Bolts (AA) and Flat washers (BB).
Connect the bottom of the Slanting beams (H1) with the Slanting beam connectors (F1) using Bolts (AA) and Flat washers (BB). Tighten the
bolts.
NOTE: To avoid destroying the finish, do not put the parts on the ground directly.
24X 24X
4X

13 / 25
Country of Origin: China
Assembly
7Attaching the Middle Beams
Connect the top of the Middle beam 2 (I2) with the Big top long connector tubes (J4) using Bolts (AA) and Flat washers (BB).
Connect the bottom of the Middle beam 2 (I2) with the Middle beam connector 1 (G1) using Bolts (DD), Flat washers (BB) and Nuts (EE).
NOTE: To avoid destroying the finish, do not put the parts on the ground directly.
24X 8X
4X
8X
8X

14 / 25
Country of Origin: China
Assembly
8Attaching the Hook and the Small Roof Support Beams
Insert and screw the Hook (N) tightly into the corresponding hole on the Small roof connector (L).
Attach the Small roof support beams (K) to the Small roof connector (L) using Bolts (DD), Flat washers (BB) and Nuts (EE).
NOTE: To avoid destroying the finish, do not put the parts on the ground directly.
4X 8X
4X
4X 1X
1X

15 / 25
Country of Origin: China
Assembly
9Attaching the Small Roof
Attach the Small roof support beams (K) to the Big Top Connector (J6) using Bolts (CC) and Flat washers (BB).
NOTE: To avoid destroying the finish, do not put the parts on the ground directly.
4X 4X

16 / 25
Country of Origin: China
Assembly
10 Attaching the Small Roof Panels
Attach the Small roof long panels (P1) and Small roof short panels (P2) to the Small roof frame using Bolts (CC) and Flat washers (BB).
NOTE: To avoid destroying the finish, do not put the parts on the ground directly.
8X 8X
2X 2X

17 / 25
Country of Origin: China
Assembly
11 Attaching the Small Roof Support Beam Covers
Attach the Small roof support beam covers (S1) to the Small roof frame using Bolts (KK) and Flat washers (BB). Then place the Small roof
covers (M) in the Small roof connector and secure using Bolts (II) and Flat washers (BB).
NOTE: To avoid destroying the finish, do not put the parts on the ground directly.
4X
1X
10X
8X
2X

18 / 25
Country of Origin: China
Assembly
12 Attaching the Big Roof Beams and the Big Roof Lower Beams
Attach the Big roof short side beams (W2) to the top of the Middle beams 2 (I2) and Slanting beams (H1) using Bolts (CC) and Flat washers
(BB). Tighten the bolts.
Attach the Big roof long side beams (W1) to the top of Middle beams 2 (I2) and Slanting beams (H1) using Bolts (CC) and Flat washers (BB).
Tighten the bolts.
Attach the Big roof short side lower beams (W4) to the bottom of the Middle beams 2 (I2) and Slanting beams (H1) using Bolts (CC) and Flat
washers (BB).
Attach the Big roof long side lower beams (W3)to the bottom of the Middle beams 2 (I2) and Slanting beams (H1) using Bolts (CC) and Flat
washers (BB).
NOTE: To avoid destroying the finish, do not put the parts on the ground directly.
4X
32X 32X
4X
4X
4X

19 / 25
Country of Origin: China
Assembly
13 Attaching the Pipes
Attach the Pipes (T5&T6&T7&T8) to the Middle beams 2 (I2) and Slanting beams (H1) using Bolts (CC) and Flat washers (BB).
NOTE: To avoid destroying the finish, do not put the parts on the ground directly.
16X 16X
2X 2X
2X 2X

20 / 25
Country of Origin: China
Assembly
14 Attaching the Big Roof Upper Panels
Attach the Big roof panels (Q1, R1, R2) to the Slanting beams (H) and Middle beams (I) using Bolts (CC) and Flat washers (BB).
NOTE: To avoid destroying the finish, do not put the parts on the ground directly.
12X 12X
2X 2X
2X