Sunjoy A102023800 Supplement

[email protected]
www.sunjoyonline.eu
GB Assembly and Safety Instructions
PAVILLONS & PERGOLAS
GAZEBO
A102023800

3 | 32

4 | 32
GB ASSEMBLY AND SAFETY INSTRUCTIONS
Thank you for your purchase! If you have any questions, issues or recommendations please feel free to
reach out to us.
Please pay close attention to the following instructions in order to reduce the risk of injuries, accidents or
damage to the product by itself.
SAFETY INFORMATION
Make sure to keep sufficient distance to houses as well as gas and power lines to avoid possible dama-
ge. Please check the area for power cables and gas lines. Ask your local authority for further information if
needed.
When making use of suitable heaters, keep a minimum distance of 1.2 m to tarp material. Open fire or
heaters with open flames such as patio heaters, umbrella heaters, gas heaters etc. should NOT be used
inside this product in any case.
The person taking care of the construction of this product is responsible for adequately securing it to
ensure its safety. Please check the anchoring constantly to avoid damage. A stable anchoring can extend
the endurance of the product.
In order to ensure your own safety, please make sure to wear a helmet, gloves and solid shoes. The metal
parts could have sharp edges and could be oily because of rust prevention treatment.
Please make sure that there is no permanent snow load. It should be removed right away. The same
applies for rain and other forms of load.
Warning - please keep plastic and small spare parts out of children's reach. The thin film may cling
to nose and mouth and prevent breathing.
IMPORTANT
Please follow ALL safety instructions listed below.
Please remove the packaging material before assembling or using the product.
Please make sure that all listed parts are included in the package and that they are not damaged.
Please read these assembly and safety instructions carefully before usage of the product and keep it for
future reference.
This product should only be used in a non-commercial way.
ASSEMBLY & USAGE
Please reserve some more time for your first installation of this product. The rules to be followed when
pitching this product are simple. Please use the illustrative instructions for each step of installation.

5 | 32
The screws joining the pipes with connectors must be tightened manually, using a hexagon key or an
automatic screw driver, set at a max. level 2, to avoid material wear.
CAUTION - Please make sure that no one is harmed during the assembly process, especially when lifting
heavy parts.
This product should only be assembled by at least two adults. Please keep children away from this
product while assembling it to protect them.
Please make sure to find a flat and even ground base that is suitable for the assembly of the product and
its intended usage.
Use only those materials provided with the product upon delivery.
Each country has varying regulations regarding movable structures (product) and unmovable structures.
Please ask your local authorities whether a permission must be obtained to pitch the product. In some
countries this depends on the size of the product.
CARE & STORAGE INSTRUCTIONS
Any kinds of damages due to acts of nature (weather damage) are not covered.
Strong winds may damage the product. Please do not leave this product unattended for an extensive
amount of time.
Strong or expensive rain may lead to the accumulation of water pockets on the roof. These pockets
need to be removed as soon as possible.
Do not make any modifications of the metal structure of the product, such as for example, connecting
and/or welding additional loads, making grooves and/or any deformations.
ENVIRONMENT & SUSTAINABILITY
Please help us take care of our planet by recycling this product after usage. Please do not dispose of the
product or any of its components with ordinary garbage, but recycle it. If in doubt, please contact us or an
authorized sales representative. We will be happy to help you recycle the product correctly, at the same
time preserving the environment.
CUSTOMER SERVICE
If you need any further assistance or information, please do not hesitate to get in touch with us via
email: [email protected].

6 | 32
TOOLS
People needed for installation work.
IMPORTANT

7 | 32

8 | 32
PARTS LIST
A
P00020078701 1
B P00020078801 1
C P00020078901 1
D P00020079001 1
E P006100125 2
F P006100124 2
G P000100196 2
J P000100195 2
K P00040145301 1
L P00040145401 1
M P00040145501 1
N P00040145601 1
PP00570036801 1
QP00570036901 2
R P00500073701 2
S P005600218 2
T P00500073801 1
U P00050186601 2
Label Part Number Qty Part Image

9 | 32
V2
W6
X1
Y1
AA 1
AB 1
AC 1
AD 1
AE 3
AF 3
AG 3
AJ 1
AK 2
AL 1
AM
P00060249801
P00050186701
P00060249901
P00060250001
P00070117801
P00070117901
P00070118001
P00070118101
P00070118201
P00070118301
P00070118401
P00560050501
P00560050601
P00560050701
P00560050801 1
Label Part Number Qty Part Image
AP 1
AQ
P00560051001
P00560051101 2

10 | 32
AR 4
AS 1
AT 1
P00050186801
P00130015001
P00120028301
Label Part Number Qty Part Image
HW1H090030002 M6 1 0
H1 H010170001 M6*15 16 1
H2 H100010050 M6*20 84 5
H3 H100010101 M6*45 8 1
H4 H010100002 M6*80
Plug
Stecker
4 0
HH H990060001 3 0
HR H990050006 76 4
HS H070010003 Φ8*180
Ring
8 0
Label Part Number Description Qty Add Part Image
HW2H090030005 M81 0
AU1
AV2
P00570036701
P00570037001

11 | 32
1
4x
1x
1x
2x 2x

12 | 32
2
4x
1x
1x
2x 2x

13 | 32
3
1x
1x
4x 12x

14 | 32
4
4x4x 8x
1x
1x

15 | 32
5
Fig.1
Fig.2
Fig.3
14x 14x

16 | 32
6
d1=d2
Rt∠90
Fig.1
Fig.2
Fig.3
12x
12x

17 | 32
7
2x 2x
8x

18 | 32
8
2x
2x
1x

19 | 32
9
4x

20 | 32
10
2x
6x
18x