Sunjoy L-GZ238PST User manual

ASSEMBLY INSTRUCTION
ITEM# L-GZ238PST
BBQ SHELTER

IMPORTANT: Please read and follow all safety statements, warnings, assembly instructions, use&
care directions, before attempting to assemble.
WARNING:
• THIS UNIT IS HEAVY!
• Do not assemble this item alone for safety. Two persons are necessary.
• Some parts may contain sharp edges – especially as noted in manual. Wear protective gloves if necessary.
• Do not play with the construction of the arbor. Children and pets should be supervised when they are in area
of the arbor. Do not allow the gate or the side panel to collide hard to avoid danger.
• Read all instructions before assembly and using this product.
• Select ideal location. Set out all parts on a clear and level surface prior to assembly. Ideally, the gazebo
frame should be set up in its desired location to avoid moving it after assembly.
• Use caution. During all the process of assembling, especially when lifting heavy or large parts, pay attention
to safety.
• Tools and Assistance. Ladder and wrench are self-provided. Whenever possible, assistance is preferred.
• Check for parts available. Before assembling your gazebo, be sure that you have all parts described in the
Parts List.
• Check for damaged parts. Before assembling your gazebo, check for damaged parts, any part that appear
damaged should be carefully checked to determine that it will be operated properly and perform its intended
function. Any part that is damaged should be properly repaired or replaced by a qualified technician.
• Refer to assembly diagram. During assembly, it will be helpful to referring to the assembly diagram.
• Keep children away. Children must never be allowed in the work area. Do not let them handle parts and tools.
No people will be permitted to enter into work area except who is working.
• Caution for fabric: KEEP ALL FLAME AND HEAT SOURCES AWAY FROM THIS TENT FABRIC .This tent is
made of flame-resistant fabric. It is not fireproof. The fabric will burn if left in continuous contact with a flame
source.
Tools required: ladder, hammer screwdriver (not included)

Pole 1 A1 2
Pole 2 A2 1
Pole 3 A3 1
Base B 4
Base cover C 4
Big Top Pole D 4
Big Top Connector E 1
Small Top Connector F 1
Small Top Pole G 4
Long Screen H 2
Short Screen I 2
Tabletop J 1
Support pole K 2
Hook L 1
Top Canopy M 1
Canopy N 1
Parts List

AA M6X15 Bolt 8 PCS
BB M6 Washer 56 PCS
CC M6X15 Bolt 16 PCS
DD M6X30 Bolt 4 PCS
EE M6 Nut 8 PCS
GG M6X40 Bolt 4 PCS
Z M6 Wrench 1 PC
Hardware Pack 1

Fig.1: Insert Pole 1 (A1)& Pole 2 (A2) & Pole 3 (A3) to Base cover (C), then use M6X15 Bolt (AA) and M6
Washer (BB) to connect Base(B) and Pole 1 (A1)& Pole 2 (A2) & Pole 3 (A3).
Fig.2: Connect Long Screen(H) and Short Screen(I) to Pole 1 (A1)& Pole 2 (A2) & Pole 3 (A3）by using M6X15
Bolt (CC) and M6 Washer (BB).
Fig.3: Attach Big Top Pole (D) to the top of Pole 1 (A1)& Pole 2 (A2) & Pole 3 (A3) by using M6X40 Bolt (GG),
M6 Washer (BB) and M6 Nut (EE).
Fig.4: Attach Hook (L) to Big Top Connector (E), then insert Big Top Pole (D) to Big Top Connector (E).
Fig.5: Insert Small Top Pole(G) into Small Top Connector(F)
Fig.6: Assemble the Canopy(N) on the top frame, do not unwrap the canopy, then attach the assembled
Small Top Pole(G)& Small Top Connector(F) to Big Top Pole (D) by using M6X30 Bolt (DD), M6 Nut (BB)
and M6 Nut (EE).

AA M6X15 Bolt 2 PCS
BB M6 Washer 4 PCS
DD M6X30 Bolt 2 PCS
FF Φ8*180MM Stake 8 PCS
Hardware Pack 2
Fig.7: Assemble the Top Canopy (M) then wrap the Canopy(N); attach Support pole (K) to
Tabletop (J) by using M6X15 Bolt (AA) and M6 Washer (BB).

Fig.8: Attach J to Pole 2 (A2) & Pole 3 (A3) by using M6X30
Bolt (DD) and M6 Washer (BB)
Fig.9: Fix Support Pole(K) to Pole 2 (A2) & Pole 3 (A3), then
insert the pin on the pole into the hole at the end of the
Support Pole (K) .
Fig.10: Take up the Base Cover(C), then useΦ8*180MM
Stake (FF) to fixup the gazebo.

USE & CARE:
1. This Gazebo is not a permanent structure and should be disassembled & stored away after use.
2. Do not repack your gazebo until completely dry.
3. This Gazebo must be assembled by Four adults or more.
4. This Gazebo must not be left erect in windy conditions.
5. Loading limit of the hook is 45lbs
6. Loading limit of the ring is 25lbs
7. Loading limit of the glass side bar top is 33lbs.
8. Steel components for garden accessories and furniture are treated with rust inhibiting paint that protects
them from rust. However, due to the nature of steel, surface oxidation (rusting) will occur if this protective
coating is scratched. This is a natural process. To minimize this condition, it is recommended that care be
taken when assembling and handling the product in order to prevent the paint from being scratched. If
scratching or damage occurs, it is recommended that the area be touched-up immediately with rust inhibiting
paint, which is included in the package. Surface rust can be removed easily using a very light application of
common cooking oil. If surface oxidation (rusting) occurs and no measures are taken to correct it, the
oxidation may start dripping onto the deck or patio, which may cause damaging stains that may be difficult to
remove.
Limited Warranty
Sunjoy Industries warrants to the original purchaser that this item is free from defects in workmanship and
materials for a period of six (6) months from the date of purchase, provided the item was factory-sealed at the
time of purchase and is maintained with care and used only for personal, residential purposes. Should any
manufacturing defect arise within this warranty period, Sunjoy Industries will repair or replace (at our option)
any defective merchandise upon proof of purchase; however, transportation and delivery costs, as well as
labor and material charges to remove or replace parts, remain the responsibility of the purchaser. A purchaser
of an "open box," previously-returned, or "clearance" item, as well as original purchasers outside of the
warranty period, may obtain replacement parts from Sunjoy Industries for products in current production, at
nominal cost.
Exclusions: Items used for commercial, contract, or other non-residential purposes, or items damaged due to
acts of nature, vandalism, misuse, or improper assembly are not covered. Corrosion or rusting of hardware is
not covered. Proof of purchase (dated register receipt) is required for warranty claims. Warranty is to the
original purchaser and is non-transferable. Any replacement of warranted items will be in the original style and
color, or a similar style and color if the original is unavailable or has been discontinued. As some states do not
allow exclusions or limitations on an implied warranty, the above exclusions and limitations may not apply.
This warranty gives you specific rights, and you may also have other rights, which vary from state to state.
CUSTOMER SERVICE: Please do not return this product to the store. For technical assistance on assembly
or replacement parts call Sunjoy Industries at 1(866) 578-6569 from 8:30 AM to 5:30 PM EST or Email
[email protected] for assistance.
Made in China