Swisher PowerBlade PBS-4521 User manual

PBS-4521 & PBS-4525
Suzuki Models
LTF 250 2X4 01 &Older
LTF 280 King Quad 4X4 98& Older
LTF 300 King Quad 4X4 99-01
LT 4 WD 01 & Older
May fit additional models see Master List
Front
Caution: Do not exceed 5 MPH with the blade or it’s brackets installed
Remove the mount plate for trail riding where extra ground clearance is needed
1602 Corporate drive
P.O. Box 67
Warrensburg, MO 64093
1-877-627-5860
13041
Partial Frame Illustration

1
2
3
4
5
6
7
8
9
7
Assembly Instructions
Note. Right and Left direction are from the operator position. The lower skid plate, If so equipped, may need
to be removed. Please retain plate and hardware to be reinstalled if the plate is removed.
Blade Mount Kit
1. Separate and Identify the parts to the Blade Mount and the Skid Plate.
2. Place Skid Plate against frame with the slots facing forward and the front hole on the right hand side.
Locate the holes in the frame that attach the Skid Plate and loosely install the M8 bolts and nust
provided. Leave loose.
3. Hook the “U Bolts” over the frame rear cross member aligning with the slots in the Skid Plates
4. Hook the remaining two “U bolts” over the sides of the frame in the general area of the slots in the
mounting plate.
5. Place the mounting plate up to the frame with the mounting tabs as shown attach “U bolts” and
tighten securely.
6. Tighten all hardware.
Item # Description Part #
1 Mount Plate 10620TK
2 Skid Plate 10463TK
3 U Bolt NB724
4 Bolt M8-1.25 X25 NB723
5 Hair Pin #39 NB127
6 Clevis Pin 10305
7 Flat Washer NB275
8 Nyloc Nut NB181
9 Nut M8 MB718