Swisher KVF009 User manual

ITEM NO. QTY. PART NO. DESCRIPTION
1 1 11524 Mounting Plate; KVF009
2 2 11525 Front Frame Clamp, KVF009
3 2 11526 Rear Frame Clamp, KVF009
4 2 11527 Rear Frame Clamp Spacer
5 10 10197 5/16-18 X 1 Carriage Bolt
6 10 NB181 5/16-18 NYLOC NUT
7 1 10999 Fairlead Bracket
Part Number: KVF009
INSTRUCTIONS:
1. Install four carriage bolts in the rear of the plate. Place the spacers over the bolts and retain
them with the push nuts (not shown). Position the winch mount plate on the atv bumper
bars as shown below.
2. Install Rear Frame Clamps and loosely assemble (4) 5/16 carriage bolts and nyloc nuts.
Install Front Frame Clamps and loosely assemble (4) 5/16 carriage bolts nyloc nuts. Assure
plate is centered on all atv bars and securely tighten nuts.
3. Attach the Fairlead Bracket using (2) 5/16 carriage bolts and nyloc nuts.
4. Using fasteners supplied with the winch, assemble winch to the winch mount plate.
5. Using instructions supplied with winch, wire accordingly.
Please call 1-800-222-8183 with questions or comments
11528 Rev 06-310
Fits Models: -Brute Force 650
4 x 4 (Straight Axle)