Swisher PowerBlade PBK-2575 User manual

PBK-2575
Kawasaki Models
360 Prairie 2X4 4X4 02-06
650 Prairie 4X4 02-03
650 Brute Force 4X4 05-06
700 Twin Prairie 4X4 04
May fit additional models see Master List
Note: This kit combines PBK-2570 & PBK-2580
Front
Caution: Do not exceed 5 MPH with the blade or it’s brackets installed
Remove the mount plate(s) for trail riding where extra ground clearance is needed
1602 Corporate drive
P.O. Box 67
Warrensburg, MO 64093
1-877-627-5860
13099
Partial Frame View
Mounting Options

Item # Description Part #
1 Mount Plate 10618TK
2 U Bolt NB724
3 Washer NB275
4 Nylock Nut 5/16-18 NB181
5 Hair Pin #39 NB127
6 Clevis Pin 10305
7 Bolt M8 X25 NB723
Assembly Instructions
Note. Right and Left direction are from the operator position. The lower skid plate, If so equipped, may need
to be removed. Please retain plate and hardware to be reinstalled if the plate is removed..
This kit has been designed to fit a variety of ATV’s. Please determine which of the below mounting
method fits your model.
1. Remove your skid plate if so equipped. Lay the skid plate on top of the mounting plate and
align hole “A”. If the Skid plate mounting holes line up with the other holes in the plate, go to
step 2, If not, go to step 3.
2. Place the plate against the frame and install the M8 Bolts with washers supplied. Item 7 & 3.
Tighten bolts securely.
3. Mounting to the Frame with U bolts. Place plate against the bottom of the frame and locate the
U bolts. Attach the washers and nuts Items 3 & 4. Snug all bolts and check for alignment. If
straight on the frame tighten all hardware.
Front of ATV
1
2
5
6
3
4
7
3
Hole A