Swisher PowerBlade PBP-3620 User manual

PBP-3620
Polaris Models
500 HO 4X4 AWD 05
May fit additional models see Master List
Front
Caution: Do not exceed 5 MPH with the blade or it’s brackets installed
Remove the mount plate for trail riding where extra ground clearance is needed
1602 Corporate drive
P.O. Box 67
Warrensburg, MO 64093
1-877-627-5860
13179

Item # Description Part #
1 Mount Plate Right 11732TK
2 Mount Plate Left 11868TK
3 Right Strap 11870TK
4 Left Strap 11871TK
5 Bolt 3/8-16 X3 NB150
6 Hair Pin #39 NB127
7 Clevis Pin 10305
8 Nut - 3/8 -16 NB182
Assembly Instructions
Note. Right and Left direction are from the operator position. The lower skid plate, If so equipped, may need
to be removed. Please retain plate and hardware to be reinstalled if the plate is removed..
1. Identify the Right hand and the Left Hand Brackets
2. Place the Right Hand mount plate up against the bottom of the Right Hand Foot Rest
3. Locate the Blade Mount tab toward the front of the ATV .
4. Slip the bolts through the Right Strap and place down through the foot rest and attach the mounting
nuts
5. Place the Left Hand mounting bracket against the Left Hand foot rest and attach. Note the front bolt
goes from the top down and the rear bolt goes from the bottom up.
6. Snug the hardware and check the space Outside of tabs. ( 14.187 Inches) Or use the Push Frame as a
gauge.
7. Tighten the bolts securely
1
2
3
4
5
6
7
8
8