Swisher PowerBlade PBK-2540 User manual

PBK-2540
Kawasaki Models
400 Prairie 2X4 4X4 02-& Older
May fit additional models see Master List
Front
Caution: Do not exceed 5 MPH with the blade or it’s brackets installed
Remove the mount plate(s) for trail riding where extra ground clearance is needed
1602 Corporate drive
P.O. Box 67
Warrensburg, MO 64093
1-877-627-5860
13118
Partial Frame View

Item # Description Part #
1 Mount Plate Right 10522TK
2 Mount Plate Left 10521TK
3 Channel Block Rear(Wide) 10420TK
4 Channel Block Front 10422TK
5 Lock Nut NB181
6 Carriage Bolt 10197
7 Washer NB275
8 Clevis Pin 10305
9 Hair Pin #39 NB127
10 Cross Plate 10419TK
Assembly Instructions
Note. Right and Left direction are from the operator position. The lower skid plate, If so equipped, may need
to be removed. Please retain plate and hardware to be reinstalled if the plate is removed..
1. Assemble Items # 1,2, and 10 with hardware Carriage Bolts, Washers, and lock Nuts Items
6,7,&5.
2. Place a Carriage Bolt, Item 6, into each of the mounting blocks. The narrow block go to the
front of the ATV, the wider blocks are used on the rear.
3. Place the assembled mount up against the bottom of the ATV and identify the locating holes.
Place a block & Bolt into each of the holes and attach Washers and Nuts. Snug the hardware.
4. Align the plate and tighten hardware
Front of ATV
1
2
5
6
3
4
7
8
9
10