Swisher PowerBlade PBY-5520 User manual

PBY-5520
Yamaha Models
600 Grizzly 01 & Older
May fit additional models see Master List
Front
Caution: Do not exceed 5 MPH with the blade or it’s brackets installed
Remove the mount plate(s) for trail riding where extra ground clearance is needed
1602 Corporate drive
P.O. Box 67
Warrensburg, MO 64093
1-877-627-5860
13094
Partial Frame View

Item # Description Part #
1 Mount Plate 10492TK
2 Left Angle Mount 10494TK
3 Right Angle Mount 10496TK
4 Nylock Nut 3/8-16 NB182
5 Hair Pin #39 NB127
6 Clevis Pin 10305
7 Bolt 3/8-16 X1 NB604
8 Lock Washer 10146
9 Bolt M10 X30 10304
Assembly Instructions
Note. Right and Left direction are from the operator position. The lower skid plate, If so equipped, may need
to be removed. Please retain plate and hardware to be reinstalled if the plate is removed..
1. Align the holes in the left Angle Mount (Item 2) with the holes in the Mounting plate as shown.
2. Insert 2 bolts ( Item 7 ) and Nuts ( Item 4 ) and snug up into position
3. The Right Angle Mount can be positioned in two different positions. The ATV will determine
this position. Install bolts and nuts and snug.
4. Remove the bolts from the front footrest support . Retain for use if plate is removed.
5. Place mount plate into position and install with longer bolts and Lock Washers provided.
6. Tighten frame mounting bolts first then tighten the Mount Plate bolts.
Front of ATV
1
2
5
6
3
4
7
8
9