Swisher PowerBlade PBH-1570 User manual

PBH-1570
Honda Models
650 Rincon 4X4 03-06
700 Rincon Auto 06
May fit additional models see Master List
Front
Caution: Do not exceed 5 MPH with the blade or it’s brackets installed
Remove the mount plate for trail riding where extra ground clearance is needed
1602 Corporate drive
P.O. Box 67
Warrensburg, MO 64093
1-877-627-5860
13117

12
3
4
5
6
Item # Description Part #
1 Mount Plate 10408TK
2 U Bolt 10517
3 Washer NB272
4 Nylock Nut 3/8-16 NB182
5 Clevis Pin 10305
6 Hair Pin #39 NB127
Assembly Instructions
Note. Right and Left direction are from the operator position. The lower skid plate, If so equipped, may need
to be removed. Please retain plate and hardware to be reinstalled if the plate is removed..
1. Place mounting plate up against the b0ottom of the frame and locate the approximate location for
the U bolts.
2. Place the U Bolts over the frame in the general area of the mounting holes.
3. Place the mount Kit up against the frame and install the Washers and nuts to a snug position
4. After all hardware has been install check the alignment of the plate to the ATV
5. Tighten the bolts securely