Swisher PowerBlade PBH-1560 User manual

PBH-1560
Honda Models
TRX 500 Rubicon 04 & Older
May fit additional models see Master List
Front
Caution: Do not exceed 5 MPH with the blade or it’s brackets installed
Remove the mount plate for trail riding where extra ground clearance is needed
1602 Corporate drive
P.O. Box 67
Warrensburg, MO 64093
1-877-627-5860
13055

1
2
3
4
57
6
4
Front
Item # Description Part #
1 Mount Plate 10406TK
2 U Bolt NB724
3 Bolt M8-1/25 X25 NB723
4 Washer Flat NB275
5 Nylock Nut 5/16-18 NB181
6 Hair Pin #39 NB127
7 Clevis Pin 10305
Assembly Instructions
Note. Right and Left direction are from the operator position. The lower skid plate, If so equipped, may need
to be removed. Please retain plate and hardware to be reinstalled if the plate is removed..
1. After removing the front skid plate, place the mount plate up against the bottom of the frame.
2. Center the blade mounting tabs between the two foot rest pegs
3. Using the two U Bolts (Part 2) Attach the plate to the Front frame tubes.
4. Center plate under the bike and Snug the bolts.
5. Attach the rear of the plate using the bolts provided to the frame under the foot rest
6. Tighten all bolts securely.