Swisher PowerBlade PBH-1550 User manual

PBH-1550
Honda Models
350 Rancher 03 & Older
May fit additional models see Master List
Front
Caution: Do not exceed 5 MPH with the blade or it’s brackets installed
Remove the mount plate for trail riding where extra ground clearance is needed
1602 Corporate drive
P.O. Box 67
Warrensburg, MO 64093
1-877-627-5860
12972

1
2
34
5
7
5
6
8
Front
Item # Description Part #
1 Mount Plate 10402TK
2 Cross Plate 10400TK
3 U Bolt NB724
4 Carriage Bolt 5/16-18 X1 10197
5 Nylock Nut 5/16-18 NB181
6 Hair Pin #39 NB127
7 Washer Flat NB275
8 Clevis Pin 10305
Assembly Instructions
Note. Right and Left direction are from the operator position. The lower skid plate, If so equipped, may need
to be removed. Please retain plate and hardware to be reinstalled if the plate is removed..
1. Place the mount plate up against the bottom of the frame.
2. Center the blade mounting tabs between the two foot rest pegs
3. Using the four U Bolts (Part 3) Attach the plate to the frame tubes.
4. Center plate under the bike and tighten the bolts securely